CCNA Exam Quizzes, Questions & Answers

Recent Quizzes

This CCNA V4 Chap 4 quiz assesses knowledge on TCP\/UDP protocols, including session management, data transfer processes, and port functions. It is designed for learners seeking to validate their technical skills in networking,...

Questions: 21 | Attempts: 215 | Last updated: Mar 21, 2023

Sample Question
Refer to the exhibit. What two pieces of information can be determined from the output that is shown? (Choose two.)

The local host is using three client sessions.

The local host is using web sessions to a remote server.

The local host is listening for TCP connections using public addresses.

The local host is using well-known port numbers to identify the source ports.

The local host is performing the three-way handshake with 192.168.1.101:1037.

CCNA V4 Chap 2

The CCNA V4 Chap 2 quiz assesses knowledge on network intermediary devices, protocols, encapsulation functions, OSI and TCP\/IP models, and PDUs. It's designed to enhance understanding of data pathways, error detection, and...

Questions: 22 | Attempts: 183 | Last updated: Mar 17, 2023

Sample Question
Which statements correctly identify the role of intermediary devices in the network? (Choose three.

Determine pathways for data

Initiate data communications

Retime and retransmit data signals

Originate the flow of data

Manage data flows

Final termination point for data flow

CCNA Dcompnwk Final 1

CCNA DCompnwk FINAL 1

This CCNA DCompnwk FINAL 1 quiz assesses knowledge in configuring network systems, understanding EIGRP authentication, FTP traffic, router boot processes, and network redundancy. It prepares learners for practical network...

Questions: 276 | Attempts: 148 | Last updated: Aug 19, 2024

Sample Question
Refer to the exhibit. Following a test plan, the network systems engineer completes the configuration of an access layer switch and connects three PCs. The engineer attempts to ping from each PC to the other connected PCs to test the configuration. Which statement describes the result of the last step?

Host 1 can ping Host 2.

Host 1 can ping Host 3.

Host 2 can ping Host 3.

No hosts can ping any other host.

Ccna2 Final Exam V3

CCNA2 Final Exam v3

The CCNA2 Final Exam v3 assesses advanced knowledge in network routing protocols and configurations. It covers topics like IP packet TTL, OSPF LSU packets, and EIGRP topology tables, crucial for network administrators managing...

Questions: 50 | Attempts: 453 | Last updated: Mar 17, 2023

Sample Question
1. Refer to the routing table shown in the exhibit. What is the meaning of the highlighted value 192?

It is the value assigned by the Dijkstra algorithm that designates the number of hops in the network.

It is the value used by the DUAL algorithm to determine the bandwidth for the link.

It is the metric, which is cost.

It is the administrative distance.

Ccna2 Final Exam V2

CCNA2 Final Exam v2

The CCNA2 Final Exam v2 assesses knowledge on OSPF configuration, router functions, packet handling, and network paths. It tests skills vital for network management and troubleshooting, focusing on real-world applications...

Questions: 50 | Attempts: 565 | Last updated: Mar 22, 2023

Sample Question
1. Which of the following are required when adding a network to the OSPF routing process configuration? (Choose three.)

Network address

Loopback address

Autonomous system number

Subnet mask

Wildcard mask

Area ID

Ccna2 Final Exam V1

CCNA2 Final Exam v1

The CCNA2 Final Exam v1 assesses knowledge in network routing configurations, including OSPF and EIGRP protocols. It tests skills in interpreting router outputs, understanding packet switching, and managing network traffic on low...

Questions: 50 | Attempts: 697 | Last updated: Mar 21, 2023

Sample Question
1. Which of the following are required when adding a network to the OSPF routing process configuration?

Network address

Loopback address

Autonomous system number

Subnet mask

Wildcard mask

Area ID

Ccna3 Final All April 2013

ccna3 final all april 2013

This CCNA3 final exam for April 2013 assesses advanced knowledge in network configuration, management, and troubleshooting. It covers topics like VLANs, Spanning Tree Protocol, and inter-VLAN routing, crucial for network...

Questions: 184 | Attempts: 167 | Last updated: Mar 19, 2023

Sample Question
Refer to the exhibit. After entering the commands in the exhibit, the administrator receives a “password required, but none set” message when attempting to connect to S1. What is the problem?

The enable secret password was not set.

S1 does not have login configured on the vty lines.

S1 does not have a password configured for the vty lines.

The crypto key is not properly configured to generate passwords.

The VLAN1 interface has not be enabled with the no shutdown command.

CCNA Tcsa 14 - Switching Exam

CCNA TCSA 14 - Switching Exam

Let’s switch things up, shall we? Today we’ll be looking at the topic of packet switching with regards to your progress in the Cisco Certified Network Associate. Switching is a method of grouping data which is...

Questions: 13 | Attempts: 681 | Last updated: Mar 20, 2023

Sample Question
What VLANs are allowed across a trunk when the range of allowed VLANs is set to the default value?

Only the management VLAN

All VLANs except the extended range VLANs

All VLANs except 1 and 1002-1005

All VLANs

CCNA Tcsa 14 - Routing Exam

CCNA TCSA 14 - Routing Exam

The CCNA TCSA 14 - Routing Exam assesses knowledge in network routing protocols and configurations. It covers IP packet handling, EIGRP, RIP, and troubleshooting connectivity issues, essential for professionals aiming to certify...

Questions: 15 | Attempts: 302 | Last updated: Apr 12, 2024

Sample Question
Refer to the routing table shown in the exhibit. What is the meaning of the highlighted value 192?

It is the value assigned by the Dijkstra algorithm that designates the number of hops in the network.

It is the value used by the DUAL algorithm to determine the bandwidth for the link.

It is the metric, which is cost.

It is the administrative distance.

CCNA Final Exam 1

CCNA final exam 1

CCNA final exam 1 assesses knowledge on private IP address ranges, OSI model functions, router configurations for Internet access, network layer addressing, and subnetting. This quiz prepares learners for network management and...

Questions: 50 | Attempts: 183 | Last updated: Mar 21, 2023

Sample Question
Which of the following are the address ranges of the private IP addresses? (Choose three.)

10.0.0.0 to 10.255.255.255

200.100.50.0 to 200.100.25.255

150.150.0.0 to 150.150.255.255

172.16.0.0 to 172.31.255.255

192.168.0.0 to 192.168.255.255

127.16.0.0 to 127.31.255.255

« Previous 1 2 3 456 7 8 9...13 Next »