CCNA Exam Quizzes & Trivia

Recent Quizzes

CCNA - Hsrp Vrrp Glbp Quiz

CCNA - HSRP VRRP GLBP Quiz

Questions: 6 | Attempts: 479 | Last updated: Dec 18, 2018

Sample Question
Which one of these is a valid HSRP Virtual Mac Address?

0000.0C07.AC01

0000.5E00.0110

0007.B400.1203

0000.C007.0201

CISCO Ccna Security Test

Cisco CCNA Security Test

Questions: 50 | Attempts: 1113 | Last updated: Nov 24, 2020

Sample Question
Which VPN component ensures that data cannot be read while in transit?Select one:

Encryption

Key exchange

Authentication

Data integrity

Ccna2 Final Exam 2013 â€“ Version1

CCNA2 Final Exam 2013 â€“ version1

Questions: 50 | Attempts: 98 | Last updated: Nov 16, 2014

Sample Question
Which of the following are required when adding a network to the OSPF routing process configuration? (Choose three)

Network address

Loopback address

Autonomous system number

Subnet mask

Wildcard mask

Area ID

Ccna2 Final Exam 2013 â€“ Version 2

CCNA2 Final Exam 2013 â€“ version 2

Questions: 50 | Attempts: 76 | Last updated: Nov 18, 2014

Sample Question
Which of the following are required when adding a network to the OSPF routing process configuration? (Choose three.)

Network address

Loopback address

Autonomous system number

Subnet mask

Wildcard mask

Area ID

Ccna2 Final Exam 2013 â€“ Version 3

CCNA2 Final Exam 2013 â€“ version 3

Questions: 50 | Attempts: 76 | Last updated: Jun 22, 2015

Sample Question
Refer to the routing table shown in the exhibit. What is the meaning of the highlighted value 192?

It is the value assigned by the Dijkstra algorithm that designates the number of hops in the network.

It is the value used by the DUAL algorithm to determine the bandwidth for the link.

It is the metric, which is cost.

It is the administrative distance.

CCNA Chapter 9 Exam Practice

CCNA Chapter 9 Exam practice

Questions: 21 | Attempts: 104 | Last updated: Nov 14, 2014

Sample Question
Refer to the exhibit.How many broadcast domains are there?

1

2

3

4

CCNA 2 V4 Chapter 10

CCNA 2 v4 Chapter 10

Hop on Ritch, we'll carry you mate.

Questions: 21 | Attempts: 61 | Last updated: Nov 10, 2014

Sample Question
What action does a link-state router take immediately upon receipt of an LSP from a neighboring router?

Floods the LSP to neighbors

Calculates the SPF algorithm

Runs the Bellman-Ford algorithm

Computes the best path to the destination network

CCNA 4 Set 3

CCNA 4 set 3

Questions: 44 | Attempts: 31 | Last updated: Nov 10, 2014

Sample Question
Refer to the exhibit. Communication between two peers has failed. Based on the output that is shown, what is the most likely cause?

Interface reset

Unplugged cable

Improper LMI type

PPP negotiation failure

CCNA 2 V4 Chapter 8

CCNA 2 v4 Chapter 8

Questions: 19 | Attempts: 133 | Last updated: Nov 4, 2014

Sample Question
Refer to the exhibit. Router B receives a packet with a destination address of 10.16.1.97. What will router B do?

Drop the packet

Forward the packet via the route to 10.16.1.0

Forward the packet via the route to 10.16.1.64

Use the default route

Ccna Hardest Quiz: MCQ Exam!

CCNA Hardest Quiz: MCQ Exam!

Questions: 57 | Attempts: 128 | Last updated: Nov 5, 2020

Sample Question
Refer to the exhibit. What can be concluded about network 192.168.1.0 in the R2 routing table?

This network was learned through summary LSAs from an ABR.

This network should be used to forward traffic toward external networks.

This network is directly connected to the interface GigabitEthernet0/0.

This network has been learned from an internal router within the same area.

CCNA Final Exam Set-2

Questions: 50 | Attempts: 35 | Last updated: Sep 6, 2014

Sample Question
When must a router serial interface be configured with the clock rate command?

When the interface is functioning as a DTE device

When the interface timers have been cleared

When the connected DTE device is shut down

When the interface is functioning as a DCE device

CCNA V4 Chapter 12 Set 1

Just learn these cunts.

Questions: 49 | Attempts: 36 | Last updated: Sep 6, 2014

Sample Question
Which of the following are the address ranges of the private IP addresses? (Choose three.)

10.0.0.0 to 10.255.255.255

200.100.50.0 to 200.100.25.255

150.150.0.0 to 150.150.255.255

172.16.0.0 to 172.31.255.255

192.168.0.0 to 192.168.255.255

127.16.0.0 to 127.31.255.255

Ccna1 Ver4 Chap 9

CCNA1 Ver4 Chap 9

Rolfie is watching you ritch

Questions: 23 | Attempts: 45 | Last updated: Aug 28, 2014

Sample Question
In the graphic, Host A has reached 50% completion in sending a 1 KB Ethernet frame to Host D when Host B wishes to transmit its own frame to Host C. What must Host B do?

Host B must wait until it is certain that Host A has completed sending its frame.

Host B must send a request signal to Host A by transmitting an interframe gap.

Host B must wait to receive a CSMA transmission from the hub, to signal its turn.

Host B can transmit immediately since it is connected on its own cable segment.

Online Exam: CCNA V4 Practice Quiz Questions!

Questions: 20 | Attempts: 70 | Last updated: Feb 9, 2021

Sample Question
Which options are properties of contention-based media access for a shared media? (Choose three.)

Non-deterministic

Less overhead

One station transmits at a time

Collisions exist

Devices must wait their turn

Token passing

CCNA V4 Chap 4

Questions: 21 | Attempts: 92 | Last updated: Aug 14, 2014

Sample Question
Refer to the exhibit. What two pieces of information can be determined from the output that is shown? (Choose two.)

The local host is using three client sessions.

The local host is using web sessions to a remote server.

The local host is listening for TCP connections using public addresses.

The local host is using well-known port numbers to identify the source ports.

The local host is performing the three-way handshake with 192.168.1.101:1037.

CCNA V4 (Old Shit) Chap 3

CCNA V4 (OLD SHIT) Chap 3

Questions: 21 | Attempts: 67 | Last updated: Aug 12, 2014

Sample Question
What application layer protocol is commonly used to support for file transfers between a client and a server?

HTML

HTTP

FTP

Telnet

CCNA V4 Chap 2

Turn Down for What>

Questions: 22 | Attempts: 56 | Last updated: Aug 12, 2014

Sample Question
Which statements correctly identify the role of intermediary devices in the network? (Choose three.

Determine pathways for data

Initiate data communications

Retime and retransmit data signals

Originate the flow of data

Manage data flows

Final termination point for data flow

Examen Final CCNA 4-1

Questions: 50 | Attempts: 358 | Last updated: Apr 21, 2014

Sample Question
Cuándo se usará la palabra clave multipoint en la configuración de PVC de Frame Relay?

Cuando se estén usando DLCI globales

Cuando se usen interfaces físicas

Cuando puedan admitirse multicasts

Cuando los routers participantes estén en la misma subred

Examen Final CCNA Quiz! Trivia

Questions: 50 | Attempts: 195 | Last updated: Nov 5, 2020

Sample Question
Cuándo se usará la palabra clave multipoint en la configuración de PVC de Frame Relay?

Cuando se estén usando DLCI globales

Cuando se usen interfaces físicas

Cuando puedan admitirse multicasts

Cuando los routers participantes estén en la misma subred

CCNA Dcompnwk Final 1

CCNA DCompnwk FINAL 1

Questions: 276 | Attempts: 50 | Last updated: Apr 12, 2014

Sample Question
Refer to the exhibit. Following a test plan, the network systems engineer completes the configuration of an access layer switch and connects three PCs. The engineer attempts to ping from each PC to the other connected PCs to test the configuration. Which statement describes the result of the last step?

Host 1 can ping Host 2.

Host 1 can ping Host 3.

Host 2 can ping Host 3.

No hosts can ping any other host.

Ccna2 Final Exam V3

CCNA2 Final Exam v3

Questions: 50 | Attempts: 415 | Last updated: Jun 12, 2013

Sample Question
1. Refer to the routing table shown in the exhibit. What is the meaning of the highlighted value 192?

It is the value assigned by the Dijkstra algorithm that designates the number of hops in the network.

It is the value used by the DUAL algorithm to determine the bandwidth for the link.

It is the metric, which is cost.

It is the administrative distance.

Ccna2 Final Exam V2

CCNA2 Final Exam v2

Questions: 50 | Attempts: 534 | Last updated: Jun 12, 2013

Sample Question
1. Which of the following are required when adding a network to the OSPF routing process configuration? (Choose three.)

Network address

Loopback address

Autonomous system number

Subnet mask

Wildcard mask

Area ID

Ccna2 Final Exam V1

CCNA2 Final Exam v1

Questions: 50 | Attempts: 607 | Last updated: Jun 12, 2013

Sample Question
1. Which of the following are required when adding a network to the OSPF routing process configuration?

Network address

Loopback address

Autonomous system number

Subnet mask

Wildcard mask

Area ID

CCNA 3 Exam Questions

Chapter 3 of the CCNA is a very wide chapter and most students find it hard to understand. The quiz below has different questions specifically from chapter 3 and will give you a clear indication of how the questions are set...

Questions: 146 | Attempts: 131 | Last updated: Nov 29, 2018

Sample Question
1. Refer to the exhibit. After entering the commands in the exhibit, the administrator receives a “password required, but none set” message when attempting to connect to S1. What is the problem?

The enable secret password was not set.

S1 does not have login configured on the vty lines.

S1 does not have a password configured for the vty lines.

The crypto key is not properly configured to generate passwords.

The VLAN1 interface has not be enabled with the no shutdown command.

Ccna3 Final All April 2013

ccna3 final all april 2013

Ccna3 final all april 2013

Questions: 184 | Attempts: 124 | Last updated: Apr 25, 2013

Sample Question
Refer to the exhibit. After entering the commands in the exhibit, the administrator receives a “password required, but none set” message when attempting to connect to S1. What is the problem?

The enable secret password was not set.

S1 does not have login configured on the vty lines.

S1 does not have a password configured for the vty lines.

The crypto key is not properly configured to generate passwords.

The VLAN1 interface has not be enabled with the no shutdown command.

« Previous 1 234 5 6 7 8 Next »