CISCO CCNA Quizzes, Questions & Answers

Top Trending CISCO CCNA Quizzes

CCNA Certification Prep: Router Boot Processes and Command Histories

Prepare for CCNA certification with focused questions on networking fundamentals, routing technologies, and infrastructure services. Ideal for aspiring network professionals seeking to validate their skills and enhance career...

Questions: 5 | Attempts: 15 | Last updated: Aug 5, 2025

Sample Question
There are no boot system commands in the router configuration in NVRAM for router CK1. What is the fallback sequence that the router CK1 will use to find an IOS during reload?

B. Flash, TFTP server, ROM

A. Flash, NVRAM, ROM

D. NVRAM, ROM, Flash

C. ROM, Flash, TFTP server

CCNA Advanced Routing and Switching Quiz

This assessment focuses on advanced networking concepts and protocols as part of CCNA Routing and Switching certification preparation. It tests skills in IP routing technologies, LAN switching technologies, and WAN technologies,...

Questions: 3 | Attempts: 16 | Last updated: Nov 11, 2025

Sample Question
Which two statements are true about interVLAN routing in the topology that is shown in the exhibit?

Switch2 must be configured with multiple physical interfaces to enable interVLAN routing in the topology.

InterVLAN routing can be achieved by connecting the FastEthernet 0/0 interface on Router1 directly to the switch without configuring subinterfaces.

The FastEthernet 0/0 interface on Router1 must be configured with subinterfaces. The FastEthernet 0/0 interface on Router1 and Switch2 trunk ports must be configured using the same encapsulation type.

InterVLAN routing in the topology can only be achieved using static routing and not dynamic routing protocols.

CCNA Certification Preparation Quiz: Networking Concepts and Protocols

Explore the depths of network engineering through our CCNA training and certification quiz. Assess and enhance your understanding of key networking concepts and skills essential for professional certification in this field....

Questions: 4 | Attempts: 11 | Last updated: Nov 4, 2025

Sample Question
At which OSI layer are frames checked for errors?

Application

The data-link layer is responsible for checking each frame received for errors. Every Ethernet frame includes the frame check sequence (FCS) or cyclic redundancy check (CRC) value that is calculated by the host which sent the frame.The receiving host generates its own FCS value for every frame received and then compares it with the FCS included in the frame. If the FCS values match, the frame has arrived without any error. If the FCS values do not match, then it is assumed that the frame has an error or is corrupt and, therefore, is discarded.

Network

Physical

CCT Exam Practice Test Questions and Answers

Are you preparing for the CCT (Cisco Certified Technician) test? Then, take this CCT Exam practice test and answer the questions related to Cisco networking. This test is basically designed to assess your knowledge and skills to...

Questions: 116 | Attempts: 1873 | Last updated: Mar 22, 2025

Sample Question
Which two signaling protocols the Cisco Unified Communication Manager supports for the Cisco IP phones?

RTP

MGCP

SCCP

SIP

H.323

CCNA Security V2.0 Final Exam

The CCNA Security v2.0 Final Exam assesses advanced knowledge in network security, focusing on control plane protection, authentication methods, and security tools like Nmap. This quiz is essential for learners aiming to master...

Questions: 98 | Attempts: 338 | Last updated: Sep 4, 2025

Sample Question
Which security implementation will provide control plane protection for a network device?

Encryption for remote access connections

AAA for authenticating management access

Routing protocol authentication

NTP for consistent timestamps on logging messages

Popular CISCO CCNA Quizzes

CCNA Subnetting Quiz Questions And Answers

Questions: 10 | Attempts: 41021 | Last updated: Jun 22, 2025

Sample Question
Subnetting allows a network administrator to divide a large network into smaller, more efficient sub-networks.

Yes

No

Ccna - OSPF Quiz Questions And Answers

Questions: 10 | Attempts: 14734 | Last updated: Jul 10, 2025

Sample Question
Which characteristics are representative of a link-state routing protocol? (Choose three)

Provides a common view of the entire topology

Exchanges routing tables with neighbors

Calculates the shortest path

Utilizes event-triggered updates

Utilizes frequent periodic updates

Ccna Quiz Exam: Hardest MCQ!

Questions: 76 | Attempts: 10382 | Last updated: Jun 22, 2025

Sample Question
When connectionless protocols are implemented at the lower layers of the OSI model, what is usually used to acknowledge that the data was received and to request the retransmission of missing data?

IP

UDP

Ethernet

A connectionless acknowledgement

An upper-layer, connection-oriented protocol or service

CCNA Osi Layer Exam Quiz

Questions: 21 | Attempts: 8238 | Last updated: Mar 22, 2025

Sample Question
Telnet, FTP, and SMTP reside on what layer of the OSI model?

Application layer

Data-Link layer

Top-Layer

DOD Layer

Network Layer

A Unique Quiz On CCNA – Ipv6

Questions: 10 | Attempts: 6522 | Last updated: Mar 17, 2025

Sample Question
Which of the following IPv6 addresses is valid?

2031:0:130F::9C0:876A:130B

2001:0DB8:0000:130F:0000:0000:08GC:140B

2001:0DB8:0:130H::87C:140B

2031::130F::9C0:876A:130B

Ait CCNA 1 Network Fundamentals Rec Chapter 5

Questions: 5 | Attempts: 6184 | Last updated: Mar 22, 2025

Sample Question
MAC and IP are address types at different OSI layers. What does MAC stand for?

Media Accounting Cemter

Media Access Control

Method Access Control

MacDonald Accumulator Certification

None of the above

Recent CISCO CCNA Quizzes