CCNA Exam Quizzes, Questions & Answers

Recent Quizzes

This CCNA 2 final exam assesses skills in configuring EIGRP on routers, understanding dynamic routing processes, and troubleshooting network connectivity issues. It is designed for individuals seeking to validate their technical...

Questions: 74 | Attempts: 268 | Last updated: Mar 21, 2023

Sample Question
Refer to the exhibit. Given the topology shown in the exhibit, what three commands are needed to configure EIGRP on the Paris router? (Choose three.)

Paris(config)# router eigrp 100

Paris(config)# router eigrp

Paris(config-router)# network 192.168.6.0

Paris(config-router)# network 192.168.7.0

Paris(config-router)# network 192.168.8.0

Paris(config-router)# network 192.168.9.0

CCNA 1 Chapter 7

ccna 1 chapter 7

Select the correct choice for each of the following questions and score a perfect!

Questions: 21 | Attempts: 359 | Last updated: Mar 21, 2023

Sample Question
Why is IEEE 802.11 wireless technology able to transmit further distances than Bluetooth technology?

Transmits at much lower frequencies

Has higher power output

Transmits at much higher frequencies

Uses better encryption methods

CCNA Basic Test Quiz

CCNA Basic Test quiz

It’s a good choice to have a certification of CCNA. It is important for one to learn CCNA if they are new at networking. This certification lasts for three years and can be renewed by taking a test before the...

Questions: 6 | Attempts: 185 | Last updated: Mar 20, 2023

Sample Question
What is Router?

Network Device

Car

Food

The Penultimate CCNA Practice Certification Exam # 2

You’ve hopefully been keeping your nose in your textbook for the last few weeks and months, and it should all pay off soon as we head into today’s second-to-last practice exam towards your Cisco Certified Network...

Questions: 18 | Attempts: 175 | Last updated: Mar 17, 2023

Sample Question
Refer to the exhibit. The exhibit shows simplified protocol data units from different OSI model layers. Which three statements are true about the PDUs and the encapsulation process? (Choose three.)

PDU #1 is a frame.

PDU #2 is an application layer PDU

PDU #3 is a segment.

PDU #4 is a transport layer PDU.

The order in which these PDUs are created during the encapsulation process is 3, 4, 1, 2.

The order in which these PDUs are created during the encapsulation process is 2, 1, 4, 3.

CCNA Practice Certification Exam # 1

This CCNA Practice Certification Exam # 1 assesses key skills in networking protocols, TCP\/IP layers, Ethernet LAN congestion factors, and VLAN management on Cisco devices. It's designed to prepare learners for CCNA...

Questions: 54 | Attempts: 337 | Last updated: Mar 18, 2023

Sample Question
What are three examples of TCP/IP application layer protocols? (Choose three.)

A terminal emulation protocol that supports remote console connections with various network devices

A protocol created by IBM that makes it easier for mainframes to connect to remote offices

A protocol responsible for transporting electronic mail on TCP/IP networks and the Internet

A protocol that controls the rate at which data is sent to another computer

A protocol that exchanges network management information between a network device and a management console

A protocol that conducts a test of the path through which a packet travels from source to destination

The Unbeatable Quiz On CCNA 1 Final Exam

The unbeatable quiz on CCNA 1 Final Exam

Do you thing that you have a proper understanding of all the topics that you covered at CCNA level 1? If you said a big yes to this then take up the totally unbeatable quiz below for the final exam and prove you are a genius...

Questions: 44 | Attempts: 5678 | Last updated: Aug 8, 2024

Sample Question
When connectionless protocols are implemented at the lower layers of the OSI model, what is usually used to acknowledge that the data was received and to request the retransmission of missing data?

IP

UDP

Ethernet

A connectionless acknowledgement

An upper-layer, connection-oriented protocol or service

CCNA Exploration V4 - Accessing The Wan - Exam Final Practice

CCNA Exploration v4 - Accessing the WAN - Exam Final Practice

This CCNA Exploration v4 - Accessing the WAN - Exam Final Practice assesses skills in configuring and troubleshooting WAN connections for corporate networks. It covers topics like leased lines, router configurations, DSL...

Questions: 50 | Attempts: 214 | Last updated: Mar 21, 2023

Sample Question
A company is looking for a WAN solution to connect its headquarters site with four remote sites. What advantage would dedicated leased lines provide to the customer compared to a shared Frame Relay solution?

Lower cost

Lower latency and jitter

Variable bandwidth capacity

Fewer physical router interfaces

CCNA Exploration 3 - Final Exam

CCNA Exploration 3 - FINAL Exam

Your studies on the Exploration curriculum under the overarching Cisco Certified Network Associate have led you to this moment – it’s your final exam! Are you fully prepared to walk out with a certification that...

Questions: 52 | Attempts: 457 | Last updated: Mar 21, 2023

Sample Question
Refer to the exhibit. The network administrator needs to setup Switch1 for remote access from HostA. Theshow ip interface brief is issued on Router1 and the show interfaces trunk command is issued on theSwitch1 to verify the current status. The administrator applies the additional configuration shown in theexhibit to Switch1. However, the telnet from HostA fails. What additional commands need to be appliedto the switch?

A) Switch(config)# interface vlan 1 Switch(config-if)# ip address 10.1.1.250 255.255.255.0 Switch(config-if)# no shutdown Switch(config-if)# ip default-gateway 10.1.10.254

B)Switch(config)# interface vlan 1 Switch(config-if)# ip address 10.1.50.250 255.255.255.0 Switch(config-if)# no shutdown Switch(config-if)# ip default-gateway 10.1.50.254

C)Switch(config)# interface vlan 10 Switch(config-if)# ip address 10.1.10.250 255.255.255.0 Switch(config-if)# no shutdown Switch(config-if)# ip default-gateway 10.1.10.254

E)Switch(config)# interface vlan 50 Switch(config-if)# ip address 10.1.10.250 255.255.255.0 Switch(config-if)# no shutdown Switch(config-if)# ip default-gateway 10.1.10.254

E)Switch(config)# interface vlan 50 Switch(config-if)# ip address 10.1.10.250 255.255.255.0 Switch(config-if)# no shutdown Switch(config-if)# ip default-gateway 10.1.10.254

A Unique Quiz On Ccna4 Chapter 2

A Unique quiz on CCNA4 chapter 2

Welcome to a unique quiz which aims to boost some of your knowledge regarding your ongoing studies towards the Cisco Certified Network Associate – a certification which will ultimately allow you multiple career...

Questions: 20 | Attempts: 250 | Last updated: Mar 21, 2023

Sample Question
Which two statements are true about time-division multiplexing (TDM)? (Choose two.)

TDM relies on Layer 3 protocols to operate.

Multiple channels can transmit over a single link.

Original data streams must be reconstructed at the destination.

TDM methods vary depending on the Layer 2 protocol that is used.

It allows information from multiple channels to be allocated bandwidth on multiple wires.

CCNA Module2 Pactice Quiz

CCNA module2 pactice quiz

The Cisco Certified Network Associate (CCNA) is a certification which offers a wide range of knowledge on the topic of networking, and as such gives students the opportunity to pursue an equally vast range of careers in the...

Questions: 47 | Attempts: 134 | Last updated: May 27, 2024

Sample Question
What are two functions of a router? (Choose two.)

It connects multiple IP networks.

It controls the flow of data via the use of Layer 2 addresses.

It determines the best path to send packets.

It manages the VLAN database.

It increases the size of the broadcast domain

« Previous 1...4 5 6 789 10 11 12...13 Next »