CCNA Exam Quizzes, Questions & Answers

Recent Quizzes

These quiz is prepared to take for whom want to measure the knowledge and ability only. This is not the only way to cheat other but it can improve your knowledge base on what you have learn.

Questions: 21 | Attempts: 1457 | Last updated: Mar 21, 2023

Sample Question
How large are IPv4 addresses?

8 bits

16 bits

32 bits

64 bits

128 bits

Ccna Certification Exam MCQ Quiz! Trivia

CCNA Certification Exam MCQ Quiz! Trivia

Do you know anything about CCNA and can pass this quiz? CCNA is an information technology certification or associate level from Cisco Systems. The certificate is valid for all engineers, including entry-level network...

Questions: 21 | Attempts: 1699 | Last updated: Mar 20, 2023

Sample Question
Which definition describes the term Internet?

A group of PCs connected together on a LAN

A group of PCs connected together by an ISP

A network of networks that connects countries around the world

A worldwide collection of networks controlled by a single organization

A Quiz On CCNA Wan Chapter 3

A Quiz on CCNA WAN Chapter 3

Once again, we are back with another chapter of your studies on wide area networks, where today we’ll be looking at the third instalment of information regarding the topic. Think you know all there is to know about WANs...

Questions: 22 | Attempts: 429 | Last updated: Mar 22, 2023

Sample Question
Refer to the exhibit. Router R1 has been configured for Frame Relay connectivity to routers R2 and R3. Which set of configuration options for routers R2 and R3 would provide each router connectivity to R1?

R2(config)# interface serial0/0/1 R2(config-if)# frame-relay map ip 10.1.1.1 102 R3(config)# interface serial0/0/1 R3(config-if)# frame-relay map ip 10.1.2.1 103

R2(config)# interface serial0/0/1 R2(config-if)# frame-relay map ip 10.1.1.1 102 R2(config-if)# frame-relay map ip 10.1.2.3 301 R3(config)# interface serial0/0/1 R3(config-if)# frame-relay map ip 10.1.2.1 103 R3(config-if)# frame-relay map ip 10.1.1.2 201

R2(config)# interface serial0/0/1 R2(config-if)# frame-relay map ip 10.1.1.1 102 R2(config-if)# frame-relay map ip 10.1.2.3 301 R3(config)# interface serial0/0/1 R3(config-if)# frame-relay map ip 10.1.2.1 103 R3(config-if)# frame-relay map ip 10.1.1.2 201

R2(config)# interface serial0/0/1.201 point-to-point R2(config-if)# frame-relay interface-dlci 201 R3(config)# interface serial0/0/1.301 point-to-point R3(config-if)# frame-relay interface-dlci 301

CCNA Wan Chapter 2

CCNA WAN Chapter 2

Welcome to the second chapter of your ongoing studies on the wide area network – a computer network which spans a large area, connecting devices within a radius over a kilometre long. What else can you tell us about these...

Questions: 21 | Attempts: 535 | Last updated: Mar 22, 2023

Sample Question
Which two statements are true about time-division multiplexing (TDM)? (Choose two.)

TDM relies on Layer 3 protocols to operate.

Multiple sources can transmit over a single channel.

Original data streams must be reconstructed at the destination.

TDM methods vary depending on the Layer 2 protocol that is used.

It allows information from multiple channels to be allocated bandwidth on multiple wires

Enhance Your Knowledge On Ccna2 Final E

Enhance your knowledge on CCNA2 FINAL E

Your studies on the Cisco Certified Network Associate have led you to this moment – the finals are coming up, and this quiz aims to enhance your knowledge on everything you need to know in order to achieve your...

Questions: 22 | Attempts: 250 | Last updated: Mar 20, 2023

Sample Question
Which routing protocol maintains a topology table separate from the routing table?

IGRP

RIPv1

RIPv2

EIGRP

Take Quiz On CCNA Wan Chapter 1

take quiz on CCNA WAN Chapter 1

Welcome to today’s quiz, which aims to further your studies on a very important part of your ongoing studies for your Cisco Certified Network Associate – the Wide Area Network (WAN), which is a computer network which...

Questions: 22 | Attempts: 2312 | Last updated: Mar 22, 2023

Sample Question
At which two layers of the OSI model does a WAN operate? (Choose two.)

Physical Layer

Data Link Layer

Network Layer

Presentation Layer

Transport Layer

Chapter 7 CCNA 3 :D

chapter 7 ccna 3 :D

This CCNA 3 Chapter 7 quiz assesses knowledge on configuring wireless access points, identifying networks via beacons, overcoming media contention, and performing site surveys. It focuses on standards like 802.11n and CSMA\/CA,...

Questions: 19 | Attempts: 133 | Last updated: Apr 17, 2024

Sample Question
Refer to the exhibit. When configuring the wireless access point, which setting does thenetwork administrator use to configure the unique identifier that client devices use todistinguish this wireless network from others?

Network Mode

Network Name (SSID)

Radio Band

Wide Channel

Standard Channel

CCNA Lan Final Practice

CCNA LAN Final Practice

The 'CCNA LAN Final Practice' assesses key networking skills focusing on hierarchical network models, wireless infrastructure, collision handling, switch configuration, and VLAN management. It prepares learners for practical...

Questions: 50 | Attempts: 457 | Last updated: Mar 21, 2023

Sample Question
What are three benefits of a hierarchical network model? (Choose three.)

Reduced contention for bandwidth

Reduced size of the physical layout

Increased fault tolerance of the network

Elimination of the need for layer three functionality

Simplification of management and troubleshooting

CCNA Lan Chapter #7

CCNA LAN Chapter #7

This CCNA LAN Chapter #7 quiz assesses knowledge in wireless networking, focusing on 802.11 standards, network security, and wireless performance issues. It is designed for individuals preparing for professional certification in...

Questions: 21 | Attempts: 341 | Last updated: Mar 20, 2023

Sample Question
Which two conditions have favored adoption of 802.11g over 802.11a? (Choose two.)

802.11a suffers from a shorter range than 802.11g.

The 2.4 GHz frequency band is not as crowded as the 5 GHz band.

802.11a is more susceptible to RF interference from common commercial items.

802.11a uses a more expensive modulation technique than 802.11g.

802.11g is backward compatible with 802.11b, but 802.11a is not.

CCNA Lan Chapter #6

CCNA LAN Chapter #6

Once again, it’s time to put our thinking caps on and delve even deeper into our studies of local area networks, as part of the Cisco Certified Network Associate’s curriculum on the topic. Can you tell us even more...

Questions: 20 | Attempts: 912 | Last updated: Mar 22, 2023

Sample Question
Refer to the exhibit. Switch1 is correctly configured for the VLANs that are displayed in the graphic. The configuration that is shown was applied to RTA to allow for interVLAN connectivity between hosts attached to Switch1. After testing the network, the administrator logged the following report:Hosts within each VLAN can communicate with each other.Hosts in VLAN5 and VLAN33 are able to communicate with each other.Hosts connected to Fa0/1 through Fa0/5 do not have connectivity to host in other VLANs.Why are hosts connected to Fa0/1 through Fa0/5 unable to communicate with hosts in different VLANs?

The router interface is shut down.

The VLAN IDs do not match the subinterface numbers.

All of the subinterface addresses on the router are in the same subnet.

The router was not configured to forward traffic for VLAN2.

« Previous 1...6 7 8 91011 12 13 Next »