Advertisement

Advertisement

Advertisement

CCNA Quizzes, Questions & Answers

Recent CCNA Quizzes

Quiz : CCNA Lan Chapter #4

Questions: 20 | Attempts: 711 | Last updated: Mar 21, 2025

Sample Question
Refer to the exhibit. Switch1 is not participating in the VTP management process with the other switches that are shown in the exhibit. What are two possible explanations for this? (Choose two.)

Switch1 is in client mode.

Switch2 is in server mode.

Switch1 is in a different management domain.

Switch1 has end devices that are connected to the ports.

Switch1 is using VTP version 1, and Switch2 is using VTP version 2.

CCNA Lan Chapter #3

Questions: 21 | Attempts: 556 | Last updated: Mar 21, 2025

Sample Question
Refer to the exhibit. Computer 1 sends a frame to computer 4. On which links along the path between computer 1 and computer 4 will a VLAN ID tag be included with the frame?

A

A,B

A,B,D,G

C,E

C,E,F

CCNA Lan Chapter #2

Questions: 20 | Attempts: 366 | Last updated: Mar 22, 2025

Sample Question
Refer to the exhibit. The exhibit shows partial output of the show running-config command. The enable password on this switch is "cisco." What can be determined from the output shown?

The enable password is encrypted by default.

An MD5 hashing algorithm was used on all encrypted passwords.

Any configured line mode passwords will be encrypted in this configuration.

This line represents most secure privileged EXEC mode password possible.

CCNA Lan Chapter #1

Questions: 20 | Attempts: 1694 | Last updated: Mar 21, 2025

Sample Question
Which layer of the hierarchical network design model is refered to as the high-speed backbone of the internetwork, where high availability and redundancy are critical?

Access Layer

Core Layer

Data-Link Layer

Network Layer

Physical Layer

CCNA Exam 640-802 (Part 1) Practice Test

Questions: 75 | Attempts: 347 | Last updated: Mar 22, 2025

Sample Question
Both switches and hubs are being utilized within the Certkiller network. Which of the following is true regarding the use of switches and hubs for network connectivity in this network?

A. Switches take less time to process frames than hubs take

B. Hubs can filter frames

C. Switches do not forward broadcasts

D. Switches increase the number of collision domains in the network

E. Using hubs can increase the amount of bandwidth available to hosts

CCNA Final: Routing Protocols (New)

Questions: 50 | Attempts: 4129 | Last updated: Oct 22, 2025

Sample Question
The network shown in the diagram is having problems routing traffic. It is suspected that the problem is with the addressing scheme. What is the problem with the addressing used in the topology?

The address assigned to the Ethernet0 interface of Router1 is a broadcast address for that subnetwork.

The subnetwork configured on the serial link between Router1 and Router2 overlaps with the subnetwork assigned to Ethernet0 of Router3.

The subnetwork assigned to the Serial0 interface of Router1 is on a different subnetwork from the address for Serial0 of Router2.

The subnetwork assigned to Ethernet0 of Router2 overlaps with the subnetwork assigned to Ethernet0 of Router3.

CCNA Final Exam Version 4.0 (100/100) - (B)

Questions: 48 | Attempts: 1824 | Last updated: Mar 20, 2025

Sample Question
1.-A PC can not connect to any remote websites, ping its default gateway, or ping a printer that is functioning properly on the local network segment. Which action will verify that the TCP/IP stack is functioning correctly on this PC?

Use the ipconfig /all command at the host�s command prompt.

Use the ping 127.0.0.1 command at the command prompt.

Use the traceroute command at the command prompt to identify any failures on the path to the gateway.

Use FTP to check for connectivity to remote sites.

Download a troubleshooting tool from the PC manufacturer's website.

CCNA Security Part 1

Questions: 118 | Attempts: 404 | Last updated: Mar 22, 2025

Sample Question
What are the three primary goals of network security?

Confidentiality

Redundancy

Integrity

Availability

CCNA Routing Protocols & Concepts Final

Questions: 58 | Attempts: 1933 | Last updated: Mar 21, 2025

Sample Question
Which two statements are true regarding link-state routing protocols? (Choose two.)

They do not work well in networks that require special heirarchical designs.

They are aware of the complete network topology.

They pass their entire routing tables to their directly connected neighbors only.

They offer rapid convergence times in large networks.

They do not include subnet masks in their routing updates.

CCNA Cidr To Subnet Memorization

Questions: 14 | Attempts: 752 | Last updated: Mar 22, 2025

« Previous 1...10 11 12 131415 16 17 18 Next »

Advertisement