TRUMPF Trumark Station Quiz: Trivia!

The mechanical shutter is a part of the laser head or processing head. This component is responsible for blocking or allowing the passage of laser beams. It can be used to control the timing and duration of laser pulses, ensuring precise and accurate laser processing. By opening and closing the shutter, the laser beam can be directed and controlled effectively, making it an integral part of the laser head or processing head.

The maximum cable length (control unit to laser head) of a TruMark Series 6000 laser is 19.7' (6m).

The TruMark 3030 is assumed to be released by TRUMPF, and based on this assumption, the wavelength of this laser would be 1,064nm.

TruMark tel diagnostics stands out from the competition because it offers a real-time view with over 100 built-in sensors. This means that users can monitor and track various parameters and data in real-time, providing them with valuable insights and the ability to make informed decisions. This feature sets TruMark apart from its competitors who may not offer such comprehensive and detailed sensor capabilities.

The spot size of a laser is determined by the wavelength of the laser beam. Smaller wavelengths have shorter distances between each wave, allowing for a smaller spot size. Therefore, the spot size of a TruMark 3230 is smaller than that of a TruMark 3130 because it has a smaller wavelength.

The average laser power of a TruMark 5020 is 20W.

The correct answer is TruMark Station 1000 because it is the only option mentioned that has a manual door. The other options either have a different type of door (motorized) or it is not specified what type of door they have.

The VMc1 laser is the only option among the given choices that does not have a quick disconnect on the laser head. The other lasers, TruMark 6020, TruMark 3020, and TruMark 5020, all have a quick disconnect feature on their laser heads.

When using a beam switch with a TruMark 6130 Dual Head System running at 100% laser power, you will get 100% laser power out of one scanner head. This means that the beam switch allows for the full laser power to be directed through a single scanner head, maximizing the power output.

Screen segmentation is typically used for marking on the circumference of cylindrical parts. This process involves dividing the screen into multiple sections to ensure accurate and precise marking on curved surfaces. By segmenting the screen, the marking system can adjust and adapt to the curved shape of the cylindrical part, resulting in consistent and high-quality markings. This application is commonly found in industries such as manufacturing, automotive, and aerospace, where cylindrical parts need to be marked with serial numbers, logos, or other identification marks.

The TruMark Series 6000 is available in 3 different wave lengths.

The CAD editor software module is not optional but standard because it is a crucial component in computer-aided design (CAD) systems. CAD editors are used to create, modify, and analyze designs in various industries such as architecture, engineering, and manufacturing. They provide essential tools for drafting, modeling, and documenting designs, making them an integral part of any CAD system. Unlike Laser Power Calibration, Quick Flow, and Screen Segmentation, which may be optional depending on specific requirements, the CAD editor is a fundamental and essential module that is typically included as a standard feature.

The depths of focus and spot size are more favorable for laser marking on the TruMark 6020 compared to the TruMark 5020. This means that the TruMark 6020 can achieve a greater depth of focus and smaller spot size, resulting in more precise and accurate laser marking.

The cooling medium of a TruMark Series 3000 laser is air. This means that the laser system uses air to cool down its components and prevent overheating. Using air as a cooling medium is common in laser systems as it is readily available and can effectively dissipate heat.

The TruMark 5020 is the only laser that the customer cannot order with the TruMark Station 7000.

not-available-via-ai

The laser source of the TruMark 5020 is located in the control unit. This means that the control unit houses the laser source, which is responsible for generating the laser beam used in the TruMark 5020 system. The control unit is where the laser is controlled and managed, allowing for precise and accurate laser marking and processing.

The TruMark 3020 laser has replaced the VMc1 laser.

The correct answer is the TruMark Station 7000 because it is the only option listed that matches the customer's request for a quote on a VWS 1200. The other options listed are either different workstations or a newer version of the TruMark Station 5000.

The TruMark Station 5000 R is the correct answer because it is the only workstation mentioned that can be equipped with two (2) DA65 rotary axis. The other workstations mentioned do not specify the capability for two DA65 rotary axis.

The TruMark 3130 is the recommended choice because it is the only laser option provided that matches the performance of the VMc5. The other laser models listed (TruMark 6130, TruMark 6020, and TruMark 3020) may not have the same level of performance or capabilities as the VMc5.

To achieve a larger mark field, using a beam expander is recommended. A beam expander can increase the diameter of the laser beam, allowing it to cover a larger area when marking. This would be a more practical solution compared to choosing a higher laser power or using a fiber laser, as they may not directly address the need for a larger mark field. Additionally, opting for a smaller focal length and saving the beam expander would not be effective in this case, as it would not result in a larger mark field.

The TruMark Station 5000 NEW is a machine that can be retrofitted with various options. The options listed are the fume exhauster, DA150, xy-axis, and z-axis. The question asks which option is not field retrofittable, meaning it cannot be added or installed after the machine has been set up. The correct answer is z-axis, indicating that the z-axis option cannot be retrofitted onto the TruMark Station 5000 NEW.

not-available-via-ai