CCNA Lan Quizzes & Trivia

Top Trending Quizzes

Welcome to the fifth chapter of our studies on the Cisco Certified Network Associate’s curriculum on the topic of local area networks, where today we’ll be taking an even further look at these computer networks which...

Questions: 20 | Attempts: 1476 | Last updated: Jan 4, 2019

Sample Question
Which two statements are true about the default operation of STP in a Layer 2 switched environment that has redundant connections between switches? (Choose two.)

The root switch is the switch with the highest speed ports.

Decisions on which port to block when two ports have equal cost depend on the port priority and identity.

All trunking ports are designated and not blocked.

Root switches have all ports set as root ports.

Non-root switches each have only one root port.

CCNA Lan Chapter #6

Once again, it’s time to put our thinking caps on and delve even deeper into our studies of local area networks, as part of the Cisco Certified Network Associate’s curriculum on the topic. Can you tell us even more...

Questions: 20 | Attempts: 641 | Last updated: Jan 4, 2019

Sample Question
Refer to the exhibit. Switch1 is correctly configured for the VLANs that are displayed in the graphic. The configuration that is shown was applied to RTA to allow for interVLAN connectivity between hosts attached to Switch1. After testing the network, the administrator logged the following report:Hosts within each VLAN can communicate with each other.Hosts in VLAN5 and VLAN33 are able to communicate with each other.Hosts connected to Fa0/1 through Fa0/5 do not have connectivity to host in other VLANs.Why are hosts connected to Fa0/1 through Fa0/5 unable to communicate with hosts in different VLANs?

The router interface is shut down.

The VLAN IDs do not match the subinterface numbers.

All of the subinterface addresses on the router are in the same subnet.

The router was not configured to forward traffic for VLAN2.

CCNA Lan Chapter #1

CCNA LAN Switching and Wirless Chapter 1

Questions: 20 | Attempts: 818 | Last updated: Jul 30, 2011

Sample Question
Which layer of the hierarchical network design model is refered to as the high-speed backbone of the internetwork, where high availability and redundancy are critical?

Access Layer

Core Layer

Data-Link Layer

Network Layer

Physical Layer

Quiz : CCNA Lan Chapter #4

The first three chapters have gone down well, so why don’t we move onto the next instalment of questions regarding local area networks as taught by the Cisco Certified Network Associate? Answer all of the following...

Questions: 20 | Attempts: 495 | Last updated: Jan 4, 2019

Sample Question
Refer to the exhibit. Switch1 is not participating in the VTP management process with the other switches that are shown in the exhibit. What are two possible explanations for this? (Choose two.)

Switch1 is in client mode.

Switch2 is in server mode.

Switch1 is in a different management domain.

Switch1 has end devices that are connected to the ports.

Switch1 is using VTP version 1, and Switch2 is using VTP version 2.

CCNA Lan Chapter #3

It’s time for yet another quiz on the topic of the local area network (LAN), where we’ll be looking at how this small computer network is able to link multiple devices within an enclosed range, such as a building or a...

Questions: 21 | Attempts: 487 | Last updated: Jan 4, 2019

Sample Question
Refer to the exhibit. Computer 1 sends a frame to computer 4. On which links along the path between computer 1 and computer 4 will a VLAN ID tag be included with the frame?

A

A,B

A,B,D,G

C,E

C,E,F

Recent Quizzes

CCNA Lan Final V2

CCNA LAN Final V2

CCNA LAN Switching and Wireless Final

Questions: 52 | Attempts: 176 | Last updated: Jul 30, 2011

Sample Question
Refer to the exhibit. A network administrator needs to add IP phones to the network. To which devices should the IP phones connect?

AS1 and AS2

DS1 and DS2

DS1, DS2, and CS1

AS1, AS2, DS1, and DS2

CCNA Lan Final Practice

CCNA LAN Final Practice

CCNA LAN Switching and Wireless Final

Questions: 50 | Attempts: 426 | Last updated: Jan 10, 2013

Sample Question
What are three benefits of a hierarchical network model? (Choose three.)

Reduced contention for bandwidth

Reduced size of the physical layout

Increased fault tolerance of the network

Elimination of the need for layer three functionality

Simplification of management and troubleshooting

CCNA Lan Chapter #7

CCNA LAN Chapter #7

CCNA LAN Chapter #7: Wireless

Questions: 21 | Attempts: 253 | Last updated: Jan 10, 2013

Sample Question
Which two conditions have favored adoption of 802.11g over 802.11a? (Choose two.)

802.11a suffers from a shorter range than 802.11g.

The 2.4 GHz frequency band is not as crowded as the 5 GHz band.

802.11a is more susceptible to RF interference from common commercial items.

802.11a uses a more expensive modulation technique than 802.11g.

802.11g is backward compatible with 802.11b, but 802.11a is not.

CCNA Lan Chapter #2

CCNA LAN Chapter #2

Welcome to our second chapter of our quiz series on the Local Area Network (LAN) as taught by the Cisco Certified Network Associate. A local area network is a computer network that links devices within a relatively small area,...

Questions: 20 | Attempts: 307 | Last updated: Jan 4, 2019

Sample Question
Refer to the exhibit. The exhibit shows partial output of the show running-config command. The enable password on this switch is "cisco." What can be determined from the output shown?

The enable password is encrypted by default.

An MD5 hashing algorithm was used on all encrypted passwords.

Any configured line mode passwords will be encrypted in this configuration.

This line represents most secure privileged EXEC mode password possible.

CCNA Lan Chapter 9: Trivia Quiz

CCNA LAN Chapter 9: Trivia Quiz

This is a CCNA lan chapter 9 review quiz. It is designed for all of you who are preparing to take the exam but are having a hard time when it comes to reviewing all you know about the local area network. If that is, you just...

Questions: 18 | Attempts: 1000 | Last updated: Sep 2, 2019

Sample Question
After an Ethernet collision, when the backoff algorithm is invoked, which device has priority to transmit data?

The device involved in the collision with the lowest MAC address

The device involved in the collision with the lowest IP address

Any device in the collision domain whose backoff timer expires first

Those that began transmitting at the same time