LAN Switching Quizzes & Trivia

This technology is crucial in today’s world, as the internet is used by billions of people all over the globe. LAN switching has had a huge impact on our lives, whether we are aware of this fact or not. So let us see if you know the answers to the most important questions about LAN switching. Switching technologies are crucial to network design, as they allow traffic to be sent only where?

Layer 2 switching is highly efficient because there is no modification to the data packet, only to the frame encapsulation of what? Layer 2 switches have the same limitations as what? What is multi-layer switching? Find out how much you know about LAN switching and impress us all by solving these quizzes.

Top Trending

Lan Switching Concepts! Trivia Quiz

LAN Switching Concepts! Trivia Quiz

LAN switching means switching of data packets, which are transferred from one computer to another over a network. They are vital to network design, as they permit the traffic to be sent only where it is required and...

Questions: 12 | Attempts: 448 | Last updated: Jun 17, 2019

Sample Question
10BASE2, 10BASE5, 10BASET.

10BASE2 and 10BASE5 uses a single cable to share network resources.

10BASET uses a shared hub to share network resources

10BASET uses co-ax cabling

10BASE2 and 10BASE5 uses UTP

In a 10BASE2 and 10BASE5, a problem happens on any single cable will affect the entire network

Switching Basics - Mallen Quiz #1

In networking, there are essentials that are needed such as switches that are used to control the computers and limit network access. The Mallen quiz will help you understand how much knowledge you have on the subject.

Questions: 20 | Attempts: 422 | Last updated: Sep 5, 2017

Sample Question
Which of the following is a classful routing protocol?

EIGRP

OSPF

IGRP

IS-IS

RIP V.2

Routing And Switching Ch 3, 4, & 5

The use of LAN systems has been on the rise off late. With a router, you are able to distribute and use internet on several devices. The quiz below tests on chapters 3,4 and 5 of routing and switching.

Questions: 32 | Attempts: 59 | Last updated: Feb 23, 2018

Sample Question
What does a switch do with a frame if the destination address is not in the MAC address database?

It floods the frame out of all ports except the one which it was received.

It forwards the frame out each ports until it receives a receipt acknowledgment from the destination.

It discards the frame.

It buffers the frame until the destination until the destination is learned.

Lan Switching And Wireless - Chapter 2 Exam

LAN Switching And Wireless - Chapter 2 Exam

CCNA Exploration v4 - Networking 207 (LAN Switching and Wireless) - Chapter 2 Exam Retrieved from: http://www.ccna4u.org/2011/06/ccna-3-chapter-2-2011-v4-0-answers-100.html See File "Net207 Chapter 2 Exam...

Questions: 20 | Attempts: 173 | Last updated: Feb 12, 2013

Sample Question
If a network administrator enters these commands on a switch, what will be the result? Switch1(config-line)# line console 0 Switch1(config-line)# password cisco Switch1(config-line)# login

To secure the console port with the password “cisco”

To deny access to the console port by specifying 0 lines are available

To gain access to line configuration mode by supplying the required password

To configure the privilege exec password that will be used for remote access

Lan Switch Practice Test

By IMS Asia (http://www.imsasia.com)

Questions: 25 | Attempts: 85 | Last updated: Jan 23, 2013

Sample Question
Given the following scenario: A stock exchange company requires its 1000 stockbrokers to have stock market continual feeds to the brokers computers. All brokers reside in the same building on Wall Street. Which multicast routing protocol is most appropriate?

Sparse-Mode

Dense-Mode Question

None of the above

Internet Internet Quizzes

Protocol Protocol Quizzes

Network Network Quizzes

Internet Security Internet Security Quizzes