Masonry Quizzes & Trivia
Top Trending
Questions: 27 | Attempts: | Last updated: Jul 30, 2011
Questions: 9 | Attempts: | Last updated: Nov 14, 2018
Questions: 29 | Attempts: | Last updated: Jan 4, 2013
Questions: 26 | Attempts: | Last updated: Jan 4, 2013
Questions: 13 | Attempts: | Last updated: Jan 4, 2013
You have 1 hour to complete this test.
Questions: 27 | Attempts: | Last updated: Jul 30, 2011
-
Sample QuestionControl joints are considered joints that will _______shortening, shrinkage and/or reduction in the length of the wall.
Masonry is the building of structures from individual units, which are often laid in and bound together by a mortar. The common building materials are bricks, building stones, concrete blocks and glass. This art is a highly...
Questions: 9 | Attempts: | Last updated: Nov 14, 2018
-
Sample QuestionIn Masonry, when you take the joints in the brick and stone and grind them out to refill them back in,what is that called?
Practice Test takes 1 hour. Keep track of your time.
Questions: 29 | Attempts: | Last updated: Jan 4, 2013
-
Sample QuestionSpecial inspections are not required for _______.
You have 1 hour to complete this test.
Questions: 26 | Attempts: | Last updated: Jan 4, 2013
-
Sample QuestionBars spliced by non-contact lap splices shall not be spaced transversely farther apart than _______ the required length of lap nor more than 8 inches.
You have 45 minutes to complete the test.
Questions: 13 | Attempts: | Last updated: Jan 4, 2013
-
Sample QuestionOn the main level of the exploratory wing what size and shape is the steel column at U and 11?
Related
Masonry Questions & Answers
What shall be the minimum length of saw-cut prisms?
Correct answer is option C – 4 inches
The minimum length of a saw – cut prism is 4 inches. The length of a masonry prism may be reduced by saw – cutting. Prisms composed of regular shaped hollow units shall have at least one comple
How deep, in inches, should the mortar joint be ranked when installing control joints?
(1/2") figure 10.2 page 273 contradicts page 275. confusing..
Special inspections are not required for _______.
Empirically designed category I, II, or III (non-essential) facilitiesIBC 1704.5.1
What is a mechanical splice?
More
A mechanical splice is a junction of two or more optical fibers that are aligned and held in place by a self-contained assembly.
Select 1 answer for each question.
Questions: 24 | Attempts: 329 | Last updated: Jan 8, 2013
-
Sample QuestionWhat society sets the standards for masonry design and construction?
The type of concrete you use varies with the purpose of the building and if not used correctly can lead to collapse of the building. Have you just covered division 3 on concrete under the building technology 3 class? Take up...
Questions: 54 | Attempts: 106 | Last updated: Nov 22, 2018
-
Sample Question_______ is a proportioned mixture of siliceous materials (sand, crushed stone) and cement (lime,Portland) which, after being prepared in a plastic state with water, hardens into a stonelike mass.
Questions: 10 | Attempts: 83 | Last updated: Jan 29, 2013
-
Sample QuestionThe most widely used masonry materials for construction works.
Select the correct answer for each question.
Questions: 28 | Attempts: 83 | Last updated: Jan 8, 2013
-
Sample QuestionWho were the first people to use bricks?
Testing of trainers capability in specific trades...
Questions: 25 | Attempts: 12 | Last updated: May 13, 2013
-
Sample Questionसही उत्तर पर टिक करें: एक घन मीटर दीवार बनाने के लिए कितनी मानक ईंटों के जरूरत पड़ती है?
A test for brick and stone masons
Questions: 9 | Attempts: 10 | Last updated: Jan 28, 2016
-
Sample QuestionIn Masonry, when you take the joints in the brick and stone and grind them out to refill them back in,what is that called?
