# 2A651 Volume 1 CDC (38-49) Unit 3

Approved & Edited by ProProfs Editorial Team
The editorial team at ProProfs Quizzes consists of a select group of subject experts, trivia writers, and quiz masters who have authored over 10,000 quizzes taken by more than 100 million users. This team includes our in-house seasoned quiz moderators and subject matter experts. Our editorial experts, spread across the world, are rigorously trained using our comprehensive guidelines to ensure that you receive the highest quality quizzes.
| By Vison
V
Vison
Community Contributor
Quizzes Created: 9 | Total Attempts: 1,878
Questions: 12 | Attempts: 217

Settings

2A651 clear and acurate test for 2A651 cdc's

• 1.

### The first part of a TO number identifies the

• A.

Sectionalization of the TO.

• B.

Type of instructions found in the To.

• C.

Category and type of equipment in the TO.

• D.

Model and series of the equipment covered by the TO.

C. Category and type of equipment in the TO.
Explanation
The first part of a TO number identifies the category and type of equipment in the TO. This means that the TO number helps to classify and categorize the equipment for which the technical order (TO) is applicable. By having a specific TO number, it becomes easier for users to identify the type of equipment and find the relevant instructions and information within the TO. This classification system ensures that the correct TO is used for the specific equipment, preventing any confusion or errors.

Rate this question:

• 2.

### The second part of a TO number gives the

• A.

TO classification.

• B.

Types of equipment in the TO.

• C.

Type of instructions found in the TO.

• D.

Model and series for equipment type in the TO.

D. Model and series for equipment type in the TO.
Explanation
The second part of a TO number provides the model and series for the equipment type in the TO. This means that by looking at the second part of the TO number, one can determine the specific model and series of the equipment that the TO is referring to. This information is important for identifying and accessing the correct set of instructions and guidelines for operating or maintaining that particular equipment.

Rate this question:

• 3.

### In which type of TO would you find a list of TOs for a specific category of equipment?

• A.

Index

• B.

Preliminary

• C.

Methods and procedure

• D.

Operational and maintenance

A. Index
Explanation
In the index of a technical manual, you would find a list of TOs (Technical Orders) for a specific category of equipment. The index serves as a reference guide, allowing users to quickly locate the relevant TOs based on the equipment they are working with. It helps in organizing and categorizing the different TOs, making it easier for users to navigate through the manual and find the information they need.

Rate this question:

• 4.

### Which type of technical manual is divided into tasks that cover a particular maintenance

• A.

General equipment.

• B.

General system

• C.

Fault isolation

• D.

Job guide.

D. Job guide.
Explanation
A job guide is a type of technical manual that is divided into tasks that cover a particular maintenance job. It provides step-by-step instructions and guidance on how to perform specific maintenance tasks. This type of manual is commonly used in industries such as automotive, manufacturing, and aviation, where detailed instructions are needed to ensure proper maintenance and repair of equipment or systems. A job guide helps technicians and maintenance personnel to efficiently and accurately perform their tasks, reducing the risk of errors and improving overall maintenance effectiveness.

Rate this question:

• 5.

### Which type of additional data is not provided in interactive electronic technical manuals

• A.

Urgent recommendations.

• B.

Time compliance technical order.

• C.

Operational supplements.

• D.

Rapid action changes.

A. Urgent recommendations.
Explanation
Interactive electronic technical manuals provide various types of additional data to assist users in understanding and troubleshooting technical issues. This includes time compliance technical orders, operational supplements, and rapid action changes. However, urgent recommendations are not typically provided in these manuals as they may require immediate action and are usually communicated through separate channels such as urgent bulletins or notifications.

Rate this question:

• 6.

### What section of the IPB contains an explanation of the coding used in the IPB?

• A.

Introduction.

• B.

Numerical index.

• C.

Group assembly parts list.

• D.

Reference designation index.

A. Introduction.
Explanation
The introduction section of the IPB typically contains an explanation of the coding used in the IPB. This section provides an overview of the document, including definitions of key terms and an explanation of how the information is organized and presented. It helps users understand the coding system used throughout the IPB, allowing them to navigate and interpret the information effectively.

Rate this question:

• 7.

### What category of TCTO is issued to correct unsafe conditions that can result in a fatality or  serious injury to personnel?

• A.

Record.

• B.

Urgent action.

• C.

Routine action.

• D.

Immediate action.

D. Immediate action.
Explanation
Immediate action TCTOs are issued to correct unsafe conditions that have the potential to cause serious injury or even death to personnel. These TCTOs require immediate attention and action to mitigate the risks associated with the unsafe condition. The urgency of addressing the issue is emphasized by the immediate action category, indicating that delays in implementing the corrective measures could have severe consequences.

Rate this question:

• 8.

### Which To covers information concerning the Air Force To sytem?

• A.

00-5-1

• B.

00-5-2

• C.

00-20-1

• D.

00-20-2

A. 00-5-1
Explanation
The correct answer is 00-5-1 because it covers information concerning the Air Force To system.

Rate this question:

• 9.

### How can you tell when the text or a picture in a TO has been Changed?

• A.

The text or picture will be marked in color.

• B.

The text or picture will be highlighted in yellow.

• C.

The word changed will be marked on the text or picture.

• D.

A bold vertical black line alongside the affected text or picture.

D. A bold vertical black line alongside the affected text or picture.
Explanation
When the text or picture in a TO has been changed, it will be indicated by a bold vertical black line alongside the affected text or picture. This visual cue helps the reader easily identify the modifications made to the original content.

Rate this question:

• 10.

### An AFTO IMT 22 is not submitted for

• A.

Job guides

• B.

Work cards

• C.

Preliminary TOs

• D.

Methods and procedures TOs

C. Preliminary TOs
Explanation
An AFTO IMT 22 is not submitted for preliminary TOs because this form is used to document and track discrepancies or issues found during maintenance or inspections. Preliminary TOs are technical orders that provide guidance for initial setup, installation, or operation of equipment, and they are typically reviewed and updated before being finalized. Since preliminary TOs are still in the development or review stage, there may not be any discrepancies or issues to report, thus making the submission of an AFTO IMT 22 unnecessary.

Rate this question:

• 11.

### Who makes sure the AFTO IMT 22 is Valid and warrants submission?

• A.

Supervisor of initiator

• B.

Commander

• C.

Initiator

A. Supervisor of initiator
Explanation
The supervisor of the initiator is responsible for ensuring that the AFTO IMT 22 is valid and warrants submission. This means that the supervisor is in charge of reviewing the form and verifying its accuracy and completeness before it is submitted. They are also responsible for ensuring that all necessary information and documentation is included with the form. By doing so, the supervisor plays a crucial role in maintaining the integrity and reliability of the AFTO IMT 22 process.

Rate this question:

• 12.

### Which AFTO IMT 22 recommendation would you submit which,if not corrected,could cause personnel injury or damage to equipment or property?

• A.

Urgent

• B.

Routine

• C.

Special

A. Urgent
Explanation
Submitting an urgent AFTO IMT 22 recommendation is necessary when there is a potential risk of personnel injury or damage to equipment or property. This indicates that if the recommendation is not acted upon promptly, there is a higher likelihood of harm or damage occurring. Therefore, urgent is the correct answer as it emphasizes the importance of immediate action to prevent any potential accidents or further damage.

Rate this question:

Quiz Review Timeline +

Our quizzes are rigorously reviewed, monitored and continuously updated by our expert board to maintain accuracy, relevance, and timeliness.

• Current Version
• Mar 20, 2023
Quiz Edited by
ProProfs Editorial Team
• Nov 08, 2010
Quiz Created by
Vison

Related Topics