Drawing Quizzes Online & Trivia

The correct answer is letter C. From the given four choices, detail is the category of drawing which provides fabrication information only for a single part. To easily explain the answer, let’s define detail drawing and fabrication drawing first. Detail drawing is a type of drawing wherein the required items to produce a mechanical equipment are described in detail to ensure that the equipment will be manufactured in accordance with the designer’s requirements. Fabrication drawing, on the other hand, is a specific type of detail drawing which shows the material parts list identifying the needed materials for the fabrication of an equipment. Using the given information, it is right to say that detail drawing is the category of drawing which provides the information needed for fabricating an item.

The correct answer is letter A. Assembly picture sheet is a category of drawing which shows multiple parts to be put together. Assembly drawing or assembly picture sheet shows different separable parts which are joined to form an item. It may also be an inseparable assembly drawing which shows separate items which are permanently joined together to form a unit that is not capable of being disassembled. It can also be an installation assembly drawing which shows how different materials are installed in different places. In an assembly picture sheet, the list of material or parts list should be included to provide the individual parts or subassembly item number, its description, part number, the material used and the material specification.

The correct answer is letter B. Dash or (-) is used to identify a new picture sheet or parts list. Parts list or list of material is needed to provide the individual parts needed, quantity of the parts required, description of the materials and the specification of materials. Please note that in parts list, the use of dash is only required when one of the following things are present: 1) If there is a shown and opposite number. Shown refers to odd numbers while opposite refers to even numbers, 2) When there is more than one version of the assembly or 3) When the drawing is a tabulated type of drawing. This type of drawing shows similar items that have difference in dimensions and materials.

The correct answer is letter C. From the given choices, letter indicated the revision level of a revised drawing. In engineering, whenever a change occurs in a revised drawing, revision letters should follow these guidelines: letter should be in sequence and must be in upper case starting with letter A and omitting letter I, O, Q, X, and Z because these numbers typically appear like numbers and may confuse others. Once all the letters have been exhausted, the letter which should follow Y should be AA through AY. If ever AA to AY have been exhausted, the next sequence should be BA to BY and so on and so forth. However, please note that revision letters should and must not exceed two characters.

The correct answer is letter B. From the four given choices, Advanced Drawing Change Notice of ADCN is the official record of change to be made on a released drawing. In engineering, when a change is recorded or authorized, the change form should include different information – among of which is the things or drawing that need to be changed. This change falls under ADCN because it is essential for people to be informed how and when the change will take effect most especially if they are going to be affected by these changes. A change can be caused by several factors such as a correction of a design error, change in material or the method of manufacturing and a change in the requirements needed for the product.

The correct answer is letter C. Among the given choices, Drawing Change Notices (DCN) is the form which shows incorporated changes to the picture sheet. In engineering, it is a form of document which is used to record or authorize a change to a specific design. A drawing change notice should include several information such as the things that need to be changed, the reason for the change, the description of the change done, the list of documents and different departments which are or will be affected by the change and an instruction when to introduce the change made. DCN can also include a drawing of the past design on the left marked as “WAS” and the new design marked as “IS”.

Pablo Picasso.Pablo Picasso is known as natural born artist, he was able to draw even before being able to talk or walk. It is believed that he out-mastered his father by the age of 13. His father was an art teacher.

Dotted line

The question “How many pictures do you want to draw” doesn’t call for a specific answer. It may either be one, two, three or more than three, and the answer will base on how many pictures you feel like drawing. While answering the quiz “What should I draw”, you will be asked several questions to determine your personality in drawing and what is suitable for you to draw. When I answered all the questions, I got landscape and the words “You are patients and talented! How about a beautiful city view or maybe a vivid forest landscape?”. So, to say that you need a specific number of pictures you prefer to draw to get the correct answer is plain wrong. Why don’t you try answering the quiz so you can find out your personality and what you can start drawing as soon as possible?

Revision

Reference Engineering Data Automated Retrieval System (REDARS)

ForeshadowingThis statement hints at the fact that the narrator would not forget and that she would remember that date. This is foreshadowing her later actions, when she sends the letter to remind Catlin of that date. There is no irony (the opposite of what is expected doesnt happen), metaphor (nothing is being compared), or hyperbole (nothing is exaggerated).