Engineering Quizzes & Trivia
The quiz is a multiple choice type of test. Choose the correct answer.
Questions: 5 | Attempts: 2263 | Last updated: Mar 21, 2022
Sample Question1. It is used to draw arcs and circles in pencil or ink.
Questions: 50 | Attempts: 4359 | Last updated: Mar 21, 2022
Sample QuestionWhich of the following is not a part of delivery management?
Quiz for Intro to Engineering Design.
Questions: 18 | Attempts: 89 | Last updated: Mar 21, 2022
This is an evaluation exam for computer engineering students who are enrolled in operating systems.
Questions: 20 | Attempts: 1822 | Last updated: Mar 21, 2022
Sample QuestionWhat are the 6 operating system tasks?
Here is an Important Trivia Quiz on Design Pattern that is guaranteed to refresh your memory of the topic. A design pattern is basically a solution that is given to a commonly occurring problem in software if it not fully...
Questions: 20 | Attempts: 367 | Last updated: Mar 21, 2022
Sample Question____ methods retrieve and update attribute values.
Sample Mechanical Engineering Technology Quiz
Questions: 6 | Attempts: 2669 | Last updated: Mar 22, 2022
Sample QuestionThe ____________________ chisel is used for general chiseling.
Mechanical Engineering Technology is the use of engineering for the creation of useful products or production machinery. As you are an aspiring mechanical engineer who has upcoming end of term exam the quiz below is designed...
Questions: 56 | Attempts: 487 | Last updated: Mar 22, 2022
Sample QuestionThe process of cutting internal threads by hand is known as:
What do you understand with engineering ethics? Do you think you can ACE this quiz? This quiz focuses on the idea of conflict of interest, the concepts of right and wrong called, what is an expected set of behavior between the...
Questions: 10 | Attempts: 11682 | Last updated: Mar 22, 2022
Sample QuestionA situation in which an engineer’s loyalty and obligations may be compromised because of self-interests or other loyalties and obligations.
This includes basic electronics engineering topics.
Questions: 34 | Attempts: 532 | Last updated: Mar 21, 2022
Sample QuestionIt is a process when the reverse voltage applied to zener diode exceeds the selected reverse breakdown voltage that occurs in the depletion layer and the current through the diode increases to the maximum circuit value, which is usually limited by a series resistor.
Industrial electricians install, maintain, test, troubleshoot and repair industrial electrical equipment and associated electrical and electronic controls in factories, plants or mines. If you are going to take a job with an...
Questions: 16 | Attempts: 21908 | Last updated: Mar 22, 2022
Sample QuestionA dual-element fuse is used to:
Welcome to the Design Process Trivia Questions. In the world where people are full of creativity, your originality can lead you to create new things that most people in the world have not seen yet. Do you want to test out what...
Questions: 14 | Attempts: 5678 | Last updated: Mar 22, 2022
Sample QuestionWhat engineering method uses a logical sequence of steps that begins with a specific problem, or perceived need, and results in a solution?
Here, take a look at this amazing 'Pneumatic Engineering Quiz' that we've created below. Do you know what Pneumatic engineering is? It is a branch of engineering that makes use of gas or pressurized air. The...
Questions: 34 | Attempts: 4890 | Last updated: Mar 22, 2022
Sample QuestionPneumatic __________ convert the energy in the compressed air into force and motion. The pneumatic drive elements can move in a linear, reciprocating or rotating motion.
Answer all the questions; all questions have only one answer.
Questions: 26 | Attempts: 90 | Last updated: Mar 22, 2022
Sample QuestionThe ____________ process is used to find a solution to a problem by collecting ideas without regard for feasibility, which occur from a group of people brought together for that specific purpose.
What do you know about Rapid Application Development? There are different ways that a system is developed, and one of the fastest ones is the RAD. There are five steps involved, and the quiz below is perfect for seeing how well...
Questions: 8 | Attempts: 76 | Last updated: Mar 22, 2022
Sample QuestionThe Capability Maturity Model (CMM) is a framework intended to help organizations improve the maturity of their project management processes.
A computer system is designed to help a computer carry out a specific task, and there are special stages that should be followed before the software is seen as perfect. How well do you know the system development life cycle, and...
Questions: 10 | Attempts: 199 | Last updated: Mar 21, 2022
Sample QuestionThe first CMM level at which measurable goals for quality and productivity are established is
Line style quiz for introduction to engineering design.
Questions: 13 | Attempts: 1199 | Last updated: Mar 21, 2022
Sample QuestionThese lines are very lightly drawn lines used as guides to help draw all other lines and shapes properly.
There are only 5 questions. Answer them to help yourself choose the right course atTP.
Questions: 5 | Attempts: 40 | Last updated: Mar 21, 2022
Sample Question1. BZE stands for
How good are you with engineering drawing? Are you ready to take the quiz? Your knowledge and skills in engineering will be put to the test. For this quiz, you will be required to understand the correct machining sequence, what...
Questions: 5 | Attempts: 8199 | Last updated: Mar 22, 2022
Sample QuestionIdentify the correct machining sequence
This quiz is about two of my personal favorite subjects. Engineering & Aviation.
Questions: 19 | Attempts: 256 | Last updated: Mar 21, 2022
Sample QuestionWhat was the name of the first Very Heavy Bomber?
In the world of engineering, the most commonly used materials are plastics and metals. If you are on the journey of becoming an engineer, you are expected to be conversant with the materials and tools you will use or come across....
Questions: 38 | Attempts: 49 | Last updated: Mar 21, 2022
Sample QuestionAn accelerator is mixed with the:
Systems analysis is a procedure of gathering and explicating facts, recognizing the issues. This technique improves the system and maintains efficiency. Whereas, System Design means replacing the existing system by expounding its...
Questions: 16 | Attempts: 555 | Last updated: Mar 21, 2022
Sample QuestionThe optimistic duration (od) is best described as which of the following?
Welcome to the Basic Design Pattern Trivia Quiz. The quiz below is designed for all of us with a passion for design, and it offers you a chance to review some of the basic design patterns that one can use. Do you feel like you...
Questions: 10 | Attempts: 7890 | Last updated: Mar 22, 2022
Sample QuestionDefines an interface for creating an object, but let the subclasses decide which class to instantiate. It let the instantiation differ to subclasses.
Design and Engineering Vocabulary
Questions: 5 | Attempts: 468 | Last updated: Mar 22, 2022
Sample Question__________________ is an engineering field that involves manipulating materials on an atomic or molecular level.