Electric Walkie- Written Test

2.

When operating the truck in the power unit direction, you should:

Walk off to the side of the control handle
Look out for the objects or uneven surfaces
Keep your feet clear of the path of the power unit
All of the above

Correct Answer

A. Walk off to the side of the control handle

Explanation

When operating the truck in the power unit direction, it is important to walk off to the side of the control handle. This is because standing directly in front of the control handle can put you at risk of being hit or injured if the handle is accidentally activated. Additionally, you should also look out for objects or uneven surfaces that may pose a hazard while operating the truck. Lastly, keeping your feet clear of the path of the power unit ensures that you do not accidentally step on or get caught in any moving parts, reducing the risk of injury. Therefore, all of the above actions should be followed for safe operation of the truck.

Rate this question:

1

3.

The control handle on a WP 2300/3000 also contains:

An emergency break lever
A side-shift load control
A high-speed switch
All of the above

Correct Answer

A. An emergency break lever

Explanation

The control handle on a WP 2300/3000 contains an emergency break lever, which allows the operator to quickly and easily engage the brakes in case of an emergency. This feature is important for ensuring the safety of both the operator and the surrounding environment.

Rate this question:

2

4.

Always enter an elevator forks and load last.

True
False

Correct Answer

A. True

Explanation

Entering an elevator first and loading last is a safety measure that ensures everyone is safely inside before the doors close. By entering first, you can ensure that there is enough space for everyone and that no one gets left behind. Loading last allows you to properly position yourself and any belongings before the elevator starts moving. This practice helps prevent accidents and ensures that everyone can safely reach their desired floor.

Rate this question:

1

5.

To provide better control in congested areas, WP 2300/3000 model trucks are equipped with:

A rabbit-turtle switch
A key switch
A horn button
A lift cutout switch

Correct Answer

A. A rabbit-turtle switch

Explanation

The correct answer is a rabbit-turtle switch. A rabbit-turtle switch is a feature found in WP 2300/3000 model trucks that provides better control in congested areas. This switch allows the operator to adjust the speed of the truck, with the rabbit setting for faster speeds and the turtle setting for slower speeds. By having this switch, the operator can easily navigate through congested areas by reducing the speed of the truck when needed.

Rate this question:

1

6.

The only way to tell if the battery needs to be recharged is if the truck has a DBI meter.

True
False

Correct Answer

A. True

Explanation

The explanation for the given correct answer is that the DBI meter is the only reliable indicator to determine if the battery of the truck needs to be recharged. This suggests that there are no other visible or obvious signs to indicate the battery's charge level. Therefore, without a DBI meter, it would be difficult to accurately assess the need for recharging the battery.

Rate this question:

1

7.

When the handle is near the horizontal or vertical position and the forward/reverse travel control is pressed, power is cut.

True
False

Correct Answer

A. True

Explanation

When the handle is near the horizontal or vertical position and the forward/reverse travel control is pressed, power is cut. This means that when the handle is in a certain position and the forward or reverse travel control is activated, the power supply to the device is automatically stopped. This safety feature helps prevent any unintended movement or accidents when the handle is not in a neutral position. Therefore, the statement is true.

Rate this question:

1

8.

The safety reversing switch on the handle is used to:

Apply the break when pushed
Sound the horn when pushed
Slow down the truck when pushed
Move the truck away from the operator when contracted

Correct Answer

A. Apply the break when pushed

Explanation

The safety reversing switch on the handle is used to apply the brake when pushed. This means that when the switch is activated, it will cause the truck to stop or slow down, ensuring safety and preventing any potential accidents or collisions.

Rate this question:

1

9.

When on a ramp, travel with the forks:

Uphill when not moving a load
Downhill if the load is unstable
Downhill whenever possible
None of the above

Correct Answer

A. Uphill when not moving a load

Explanation

When on a ramp, it is recommended to travel with the forks uphill when not moving a load. This is because traveling uphill without a load provides better stability and control over the forklift. The weight distribution is more balanced, reducing the risk of tipping or losing control of the forklift. However, if the load is unstable, it is advised to travel downhill to maintain better control and prevent any potential accidents. Traveling downhill whenever possible is not the correct answer as it may not always be safe or necessary.

Rate this question:

3

10.

If your truck malfunctions:

Turn the truck off
Pull the power disconnect
Contact your supervisor
All of the above

Correct Answer

A. Turn the truck off

Explanation

If the truck malfunctions, it is important to turn the truck off immediately. This is because leaving the truck running can potentially worsen the malfunction or cause further damage. By turning the truck off, you can prevent any potential hazards or accidents.

Rate this question:

5

Electric Walkie- Written Test

You can find the truck's maximum total weight capacity listed in both standard (English) units and in Metric units on the WP 2300/3000 data plate. You should never try to handle more than this weight.

Quiz Preview

When operating the truck in the power unit direction, you should:

The control handle on a WP 2300/3000 also contains:

Always enter an elevator forks and load last.

To provide better control in congested areas, WP 2300/3000 model trucks are equipped with:

The only way to tell if the battery needs to be recharged is if the truck has a DBI meter.

When the handle is near the horizontal or vertical position and the forward/reverse travel control is pressed, power is cut.

The safety reversing switch on the handle is used to:

When on a ramp, travel with the forks:

If your truck malfunctions: