CSA 7.3/7.4 Completo

1. You are helping to implement the technical components of a new application. Before you can begin work, you must obtain definitions of the business processes and service-level agreements. Which members of the development team would you go to for this information?

Stakeholders

Case participants

Subject Matter Experts (SMEs)

Business architects

2. Which requirement could be satisfied with a user action?

Allow a user to transfer a case to another employee at any stage of the case.

Reassign any task that remains open after three days to another user.

An application randomly sends a survey to customers once their case is resolved.

Requiring a separate approval process whenever an order exceeds USD 10,000.

3. Adding instructions to a step ____________.

Defines what the step should do.

Describes the business value of the step.

Instructs an architect how to build the step.

Describes to an end user what should be done in the step.

4. A step in the case life cycle has a case status value of Pending-Approval. When is the status of the case automatically updated?

At the beginning of the step

Only if the user manually updates the case status

At the end of the step

The status of a case cannot be automatically updated

5. What type of step typically requires contextual instructions?

Approve/Reject

Create Case

Change stage

Collect information

6. In an mortgage application, the user creates a loan request. In order for the loan request to be approved, the loan officer must receive the results of an appraisal. How would you configure the case types to reflect their relationship?

Make loan request a parent case type, and appraisal a child case type.

Make both loan request and appraisal peer case types.

Make mortgage a parent case type. Make loan request and appraisal child case types

Make appraisal a parent case type, and loan request a child case type.

7. In an online shopping application, the primary case type PurchaseOrder has two child case types: Payment and Packaging. In processing PurchaseOrder case PO-11, Payment case Pay-37 and Packaging case Pac-56 are created. Which statement about the processing of PO-11, Pay-37, and Pac-56 is correct?

Both Pay-37 and Pac-56 have to be resolved before PO-11 can be resolved

PO-11 can be resolved when either Pay-37 or Pac-56 is resolved.

Pac-56 has to be resolved before Pay-37 is resolved.

PO-11 has to be resolved before either Pay-37 and Pac-56 is resolved.

8. An application references a data element found in the Work-class. How is this rule inherited by the application?

By adding the ruleset that contains the property to the application

By applying directed inheritance.

By applying pattern inheritance.

By naming PegaRULES as the built-on application.

9. Select the two items of information used to uniquely identify a rule. (Choose Two)

The status of the rule.

The application that uses the rule.

The description of the rule.

The class of the rule.

The type of the rule.

Submit

10. You check out a rule to update it. While the rule is checked out, another developer decides to test a case type by creating and processing the case. What happens when the application attempts to use the rule you checked out?

The application ignores the checked-out version and uses the previous version in the application ruleset.

The application returns an error and stops processing the case, because the rule is unavailable for use.

The application runs the checked-out version of the rule, because that is the most up-to-date version of the rule.

The application cannot run because the rule is unavailable.

11. A candidate's language skills are captured in a candidate case. What type of property is used to capture the candidate's language skill if the property reference looks like this: .Language(Spanish)?

Page

Single value

Value group

Text

12. pyWorkPage stores which type of information?

Information about the Pega server.

Data cached from an outside system.

Information about the current operator

Information about a case.

13. You are configuring a declarative network that contains eleven declare expressions which are used to calculate the interest rate for a home mortgage. For example, the target value Property Tax Assessment is used as a source value when calculating the Assessed Property Value. The declare expressions use target values from other expressions to calculate their target values. The field displaying the interest rate appears on the approval form. To improve performance, how can you reduce the number of calculations?

Apply the declare expression in the approval flow action.

Calculate the total interest rate value by adding all the declare expression target property values

Specify forward chaining in the declare expression that calculates the total interest rate value.

Specify backward chaining in the total interest rate declare expression.

14. When does data propagation occur?

When a value in the child case or spin-off case changes

When a case is created

Whenever a parent's value changes

When a parent's value changes and a data transform is used to configure the data propagation

15. You have a data page with customer data. The data page is configured to reload if it is older than one hour. Which of the following best describes when the data page will reload?

The data page reloads automatically one hour after it was last accessed.

The data page reloads automatically one hour after it was created.

The data page reloads on the next access one hour after it was last accessed

The data page reloads on the next access one hour after it was created.

16. In which types of UI control is reference data from the local data source typically used?

Drop-Down

Text field

Label

Button

17. The External Database Table Class Mapping wizard creates a data class and a database table. How do you make this data available to your application?

Use case data

Use local storage

Use a data page

Use a static list

18. Which variable in the assignment urgency calculation enables users to increment the service level urgency on a case-by-case basis?

.pxUrgencyWork

.pxUrgencyAssign

.pxUrgencyAssignSLA

.pyUrgencyAssignAdjust

19. Automating decisions based on business logic enables ___________________________.

Application users to mark a specific location for business exceptions that may arise in the process flow

Application users to focus on more nuanced decisions that require business expertise

Architects to improve the performance of the application

Architects to spend less time building the application

20. An application change goes into effect on June 15, 2016. Due to this change, two fields are added to a user form to collect information for compliance purposes. Assuming that today is April 30, 2016, how should you configure circumstancing for the form?

Update the existing form to apply a circumstance; specify June 15, 2016, as the end date.

Circumstance the form by property and date; specify June 15, 2016, as the start date.

Circumstance the form by template and definition; in the definition, specify June 15, 2016, as the cut-off date.

21. Which of the following sets represent action sets (event > action) in Pega Platform? (Choose Two)

Tab key > Add new work

Open mobile app > Focus

Double-click > Scan barcode/QR code

Run data transform > Enter

Submit

22. A manager requests a report that contains the following columns: Create Date, Case ID, Create Operator, and Work Status. You must sort the Case ID values so the case with the highest ID value appears at the top of the list and descends in order. How would you design the report definition to support this requirement?

Add a filter condition where Case ID is greater than one.

For the Case ID property, select Highest to Lowest sort type.

For the Case ID property, select Count in the Summarize column.

Make sure that the Case ID is the first column in the report.

23. Which type of data is exposed by default?

Both process metrics and business metrics are exposed by default.

Process metrics, such as the current stage or status, are exposed by default.

Neither process metrics nor business metrics are exposed by default.

Business metrics, such as the total value of a sales order, are exposed by default.

24. A report contains five columns of data about sales quotes. The case ID (.pyID) The currently assigned sales representative (.pxAssignedOperatorID) The creation date of the sales quote (.pxCreateDate) The sales territory (.Territory) The expiration data of the quote (.ExpiryDate) Prior to property optimization, which two properties does the report identify as potentially impacting performance? (Choose Two)

Creation date (.pxCreateDate)

Assigned case worker (.pxAssignedOperatorID)

Case ID (.pyID)

Expiration date (.ExpiryDate)

Sales territory (.Territory)

Submit

25. When unit testing a rule, you can identify a data transform to use during the test. What does the data transform do?

Records the result of the unit test.

Copies test results to the clipboard.

Provides initial values for properties used in rule evaluation.

Identifies an automated test result to compare rule execution against.

26. The user enters a response on a form and clicks Submit. The Pega Platform application returns an error. Which tool can you use to determine the cause of the error in your application?

Use the Clipboard tool and search for the property value on pyWorkPage that is causing the error

Use the Live UI tool and search for the form that is causing the error.

Use the Tracer tool, search for the first FAIL status, and see which step is causing the error.

Use the Alerts tool and search for the alert that is reporting the error.

27. A customer wants to copy the contents of a previous order to their current order. What rule type do you use to copythe order contents?

Function

DataPage

Declare expression

Data Transform

28. A data page holds the local weather information based on the user's address. The data page's Reload if older Thanfield is set to 15 minutes.The data page is created at 09:12.At 09:20 the user requests the weather information.At 09:42 the user requests the weather information.When is the data page reloaded?

9:42

9:27

9:20

9:35

29. Mach each data page scope to its use case.

Thread

Node

Requestor

Submit

30. While reviewing a UI form in a Grooming/Elaboration playback, you notice a typo in the label of a field. Which tool allows you to identify the section rule that contains the incorrect label?

Live UI

The Tracer

The Clipboard tool

The Property Analyzer

31. While reviewing a UI form in a Grooming/Elaboration playback, you notice a typo in the label of a field. Which toolallows you to identify the section rule that contains the incorrect label?

Live UI

The Tracer

The Clipboard tool

The Property Analyzer

32. Which requirement would be implemented through circumstancing?

An application sends a text if a customer provides a mobile phone number, otherwise, the application sends anemail.

33. In which situation does a case type for software upgrade requests reuse a rule through pattern inheritance?

The case type uses an authorization process used throughout the organization.

The case type uses the Data-Party-Operator class to describe a work party.

34. A customer wants to copy the contents of a previous order to their current order. What rule type do you use to copythe order contents?

Function

Data transform

Declare expression

Data page

35. Which rule can only return a true/false result when evaluating a condition?

Declare expression

Decision tree

Decision table

When rule

36. An application allows bank customer to apply for a credit card. During the process of applying for the credit card,customers can elect to transfer a balance to the card.The bank currently offers three balance transfer options for customers applying for a new credit card:4. 0 percent interest for 6 months.5. 2.9 percent interest for 12 months.6. 3.9 percent interest for 24 months.The bank requires that customers first elect whether to transfer a balance. If customers elect to transfer a balance,they must select one of the three options.Which type of rule do you use to test whether the customer has decided to transfer a balance?

Data transform

Declare expression

When rule

Activity

37. There are several components involved when calling an external service. A data transform is typically used whenprocessing the response returned by the external system. What is the purpose of that data transform?

Map the response to the application data structure

Perform error handling

Map the protocol specific response to the clipboard

Finalize the connector

38. A purchase request case creates a child case to check inventory. If products are added to or deleted from thepurchase request, the data needs to be propagated to the check inventory case.What is true with regards to the data propagation feature for the above requirement?

39. Customer Service Representatives (CSRs) review customer requests to replace a lost or stolen credit card. Once therequest is approved, customers are notified by letter of the expected delivery date for a replacement card typicallywithin one week.The CSR must be able to prioritize time-sensitive requests such as requests from customers who are on vacation.Time-sensitive requests are prioritized as follows:-Customers receive a replacement card the next day.-Fulfillment requests are sent to a dedicated workbasket.-Customers receive notification of the expected delivery date by email.How do you provide CSRs with the option to increase the assignment urgency for requests from a customer with atime-sensitive need?

Allow the CSR to select a value for .pxurgencyWork.

Allow the CSR to select an SLA with greater urgency adjustments.

Allow the CSR to select a value for .pyUrgencyAssignAdjust.

Allow the CSR to adjust the goal and deadline urgency for the case.

40. Match each process step to the appropriate flow shape.

The system notifies the user of the case status by email.

The system evaluates the request type and completion date to branch the process.

The system calls a triage flow.

A user enters information for an IT request.

Submit

41. To qualify for an automobile loan, the applicant must have a credit score of at least 740 and must be currentlyemployed. If either condition is not met, the loan request cannot be submitted.How would you configure the process to support this requirement?

42. You need to add a button to a user form. When the button is pressed, the application invokes a data transform, thencreate a new case.How do you implement this functionality?

Configure an action set on the button control.

Configure a local action on the button control.

Configure a mixin for the button in the skin.

Configure a style format for the button in the skin

43. You are implementing a UI form collecting job applicant information. Users must provide values to certain fieldsbefore submitting the form.Which configuration adds asterisks to indicate the mandatory fields on the form?

Configure the mandatory fields as Required in the section rule

Use multiple Validate rules for each mandatory field

Use an Edit Validate rule to verify if each of the mandatory properties has a value

Use a Validate rule to verify the mandatory fields have a value

44. In an airline reservation application, users enter departure and return dates and submit for flight search. This isimplemented as a flow action. You need to ensure that the return date is later than the departure date. You alsoneed to copy the dates to a search parameter page that is used for flight search.Select the two rule types that the flow action references to satisfy these requirements. (Choose Two)

Validate

Edit Validate

Service Level

Data Transform

Submit

45. You have created a new report that contains a list of employees, hire dates, and managers. You have been asked todisplay each manager in a row. Beneath each manager row, you must list the manager's employees and their hiredates. How would you support this request?

Summarize the manager column

Sort the manager column

Group the manager column

Filter the manager column

46. A manager requests a report that contains the following columns: Create Date, Case ID, Create Operator, and WorkStatus. You must sort the cases so the case with the most recent create date appears at the top of the list anddescends in order.How would you design the report definition to support this requirement?

Select Highest to Lowest sort type for Create Date.

Select Count in the Summarize column for Create Date.

Add a filter condition where Create Date is greater than the current date.

Make that Create Date the first column in the report.

47. A data page holds the local weather information and has he Reload if Older Than field to 10 minutes.The data page is created at 11:22. The user then performs the following actions:11:28 the user refreshes the weather information11:40 the user refreshes the weather informationAt what time is the data page reloaded?

11:32

11:38

11:40

11:28

48. You have been asked to create a report that displays the following information:-Assigned case worker (.pxAssignedOperatorID)-Requestor (.pxCreateOperator)-Request date (.pxCreateDateTime)-Due date (.DueDate)-Assigned vendor (.VendorName)The report contains a filter to only return purchase requests with a status (.pyStatusWork) of open.Which property can you optimize to improve report performance?

.DueDate

.pyStatusWork

.pxAssignedOperatorID

.pxCreateDateTime

49. Users can access an apartment search application from different devices with different screen sizes. A screen displaysthe photos of available properties. On a wide desktop screen, the photos are displayed in an inline format. On asmart phone, the photos should be displayed in a vertical stack.How do you implement the screen for this requirement?

Use a column layout with a responsive breakpoint at smart phone screen width to hide the left and right columns

Circumstance the section rule to display the photos with different arrangements at different screen sizes.

Circumstance the layout to display the photos the photos with different arrangements at different screen sizes.

50. You have been asked to configure a rule for use in a business process to evaluate multiple property values and returna text value as a result. Which type of rule satisfies this requirement?

When rule

Decision tree

Validate

Data transform

51. In an insurance claim application there is a claim case defined. The claim case creates a top-level repair case.Data propagation is configured to copy relevant claim data into the repair case.What is true with regards to the data propagation feature for subsequent updates to the claim case?

The data propagation feature only propagates data when the repair case is created.

The data propagation feature will track changes and propagate data for the entire lifecycle of the repair case.

The data propagation feature cannot be used because it only supports data propagation to child cases.

52. Which requirement is satisfied by configuring a service level agreement?

A transaction review is completed within 24 hours.

Requests from customers with elite status go to a dedicated work group.

Users are notified when they receive an assignment.

Transaction dispute cases are considered more urgent than address change cases.

53. You are assigned to a team to develop a case life cycle design for an application. Why would you design the case life cycle?

Show technical users how to use Pega developer tools for collecting customer information.

Help estimate the total time required for the case life cycle to produce a new policy.

Ensure all team members have a common understanding of how a case is processed and resolved.

Guide the development team with guidelines on how to manage the project development.

A case life cycle allows all project team members to visualize the work as a whole and easily define its parts.

Explanation

A case life cycle allows all project team members to visualize the work as a whole and easily define its parts.

54. A loan origination case requires the loan application be routed to an underwriter for verification. Any underwriter in the department can complete the verification. How would you route the verification assignment?

To the reporting manager

To the current user

To a specific user

To a work queue

Routing the assignment to a work queue would allow any underwriter with access to the work queue to complete the verification.

Explanation

Routing the assignment to a work queue would allow any underwriter with access to the work queue to complete the verification.

55. The primary purpose of a service level is to __________.

Track assignment status over time

Assign cases to the appropriate case worker

Help ensure timely completion of assignments

Generate service level reports

Service Levels, also known as Service Level Agreements (SLAs), are used to ensure work is completed within the expected time intervals.

Explanation

Service Levels, also known as Service Level Agreements (SLAs), are used to ensure work is completed within the expected time intervals.

56. What three questions can you ask to help you plan user views? (Choose Three)

Will the information be stored in an external database?

How will users enter values in those fields?

Will users want to see information displayed using different styles?

What fields do users need to see?

Can users modify the values or only read the values?

Use the appropriate display format for the data to be entered. This helps users complete their tasks with fewer errors.
In order to complete the tasks, end-users enter information in fields on the forms.
Knowing what each user must do to complete a specific task will help them complete the task with fewer errors.

Explanation

Use the appropriate display format for the data to be entered. This helps users complete their tasks with fewer errors.
In order to complete the tasks, end-users enter information in fields on the forms.
Knowing what each user must do to complete a specific task will help them complete the task with fewer errors.

Submit

57. What is the difference between a requirement and specification?

There is no difference between a requirement and a specification

A requirement describes what the business need is, and specifications describe how the application will meet the business need.

A requirement provides a blueprint for how the application will meet the goals defined in a specification.

A requirement defines a specific step in a process; a specification defines a complete process.

58. Which requirement could be satisfied with a user action?

Allow a user to transfer a case to another employee at any stage of the case

Requiring a separate approval process whenever an order exceeds USD 10,000

Reassign any task that remains open after three days to another user

An application randomly sends a survey to customers once their case is resolved

Since the decision to transfer the case is left to the user, the case can be implemented as an optional process.

Explanation

Since the decision to transfer the case is left to the user, the case can be implemented as an optional process.

59. What three questions should you ask when creating a correspondence? (Choose Three)

Which email server should the correspondence use?

How often should you send the correspondence?

Who is the user that receives the correspondence?

When does the correspondence need to be sent?

How will the correspondence be sent?

Submit

60. Which two statements identify why you should automate correspondence? (Choose Two)

Automating correspondence allows you to send timely communication

Automating correspondence allows you to advance a case.

Automating correspondence allows for sending consistent information to users.

Automating correspondence keeps all interested parties informed of the current status of a case.

Submit

61. Adding instructions to a step ____________ (Choose One)

Instructs an architect how to build the step.

Describes to an end user what should be done in the step.

Defines what the step should do.

Describes the business value of the step.

Instructions inform end users what to do next on a case at runtime.

Explanation

Instructions inform end users what to do next on a case at runtime.

62. With whom does a system architect work to develop application specifications?

Business architects

Business stakeholders

System architects work with business architects to develop specifications that describe elements of the application design.

Explanation

System architects work with business architects to develop specifications that describe elements of the application design.

63. You check out a rule to update it. While the rule is checked out, another developer decides to test a case type by creating and processing the case. What happens when the application attempts to use the rule you checked out?

The application ignores the checked-out version and uses the previous version in the application ruleset.

The application returns and error and stops processing the case, because the rule is unavailable for use.

The application runs the checked-out version of the rule, because that is the most up-to-date version of the rule.

The application cannot run because the rule is unavailable.

Checking out a rule does not prevent an application from running the rule. Checking out a rule only prevents system architects from updating the rule until you check in the rule.

Explanation

Checking out a rule does not prevent an application from running the rule. Checking out a rule only prevents system architects from updating the rule until you check in the rule.

64. __ is a template for creating _ at run time. Fill in the blanks with one of the following pairs.

Data structure, processes

Case type, cases

Top-level case , child cases

Case, case types

Case type is a template for creating and processing cases.

Explanation

Case type is a template for creating and processing cases.

65. In an online shopping application, the primary case type PurchaseOrder has two child case types: Payment and Packaging. In processing PurchaseOrder case PO-11, Payment case Pay-37 and Packaging case Pac-56 are created. Which of the following statements about the processing of PO-11, Pay-37, and Pac-56 is correct?

Both Pay-37 and Pac-56 have to be resolved before PO-11 is resolved

PO-11 has to be resolved before either of Pay-37 and Pac-56 be resolved

Pac-56 has to be resolved before Pay-37 is resolved.

PO-11 can be resolved when either of Pay-37 and Pac-56 is resolved.

Child cases must be resolved before parent case.

Explanation

Child cases must be resolved before parent case.

66. A candidate's language skills are captured in a candidate case. What type of property is used to capture the candidate's language skill if the property reference looks like this: .Language(Spanish)?

Page

Single value

Value group

Text

Value group properties have a subscript.

Explanation

Value group properties have a subscript.

67. PyWorkPage stores which type of information?

Information about a case

Information about the Pega server

Information about the current operator

Data cached from an outside system

Information about a case is stored on pyWorkPage

Explanation

Information about a case is stored on pyWorkPage

68. An expense report process requires the assignment for travel expenses to be routed to a specific auditor. The auditor is also a member of an auditing work group. How would you route the assignment so that the user receives it?

To the user's work group

To the user's manager

To the user's workbasket

To the user

You route the assignment directly to the user by specifying the user ID

Explanation

You route the assignment directly to the user by specifying the user ID

69. You are configuring a standard email to automatically be sent to loan applicants informing them that their loan has been approved. The requirement states that the email must include values for the applicant's name, the loan office, and the loan amount. The email must also include boilerplate content stating the loan's terms and conditions, which is regularly updated. This content is in a paragraph rule shared by other standard emails throughout the organization. How would you configure your email?

Insert applicant's name, loan office, and loan amount properties. Also, insert the paragraph rule

Add placeholder text for the applicant's name, loan office, and amount. Also, insert the paragraph rule.

Insert applicant's name, loan office, and loan amount properties. Also, copy and paste the paragraph content into your email.

The system adds the property values and inserts the paragraph rule content when the email is sent.

Explanation

The system adds the property values and inserts the paragraph rule content when the email is sent.

70. Which situation should you address with a rule circumstance?

A national insurance company requires a different minimum for liability coverage in each state

An online order process optionally allows customers to update the credit card number saved with their account

A process does not execute if a user is not married.

Circumstancing allows you to create a targeted rule for each state, rather than one complex rule for all states.

Explanation

Circumstancing allows you to create a targeted rule for each state, rather than one complex rule for all states.

71. An application change goes into effect on June 15, 2016. Due to this change, two fields are added to a user form, to collect information for compliance purposes. Assuming that today is April 30, 2016, how should you configure circumstancing for the form?

Circumstance the form by property and date; specify June 15, 2016, as the start date

Update the existing form to apply a circumstance; specify June 15th, 2016, as the end date

Circumstance the form by template and definition; in the definition, specify June 15, 2016, as the cut-off date

72. An application recommends mobile phone plans to customers. Which type of rule predicts the customer response to an offer based on existing data?

Map Value

Predictive Model

Analytical Model

When

73. The design document of an application states that the application must be implemented with UI responsiveness. Which behavior does the design require for the application?

An application can deliver email notification to users in a timely fashion.

An application can respond to voice command

Different groups of users have access to different content and functions

The placement of the screen content adjusts to different screen sizes and devices automatically

Responsiveness here means UI rendering is responding to different screen sizes on different devices.

Explanation

Responsiveness here means UI rendering is responding to different screen sizes on different devices.

74. A manager requests a report that contains the following columns: Create Date, Case ID, Create Operator, and Work Status. You must sort the Case ID values so the case with the highest ID value appears at the top of the list and descends in order. How would you design the report definition to support this requirement?

Add a filter condition where Case ID is greater than one.

For the Case ID property, select Highest to Lowest sort type

For the Case ID property, select Count in the Summarize column

Make sure that the Case ID is the first column in the report

75. Which type of data is exposed by default?

Process metrics, such as the current stage or status, are exposed by default

Business metrics, such as the total value of a sales order, are exposed by default

Both process metrics and business metrics are exposed by default

Neither process metrics nor business metrics are exposed by default.

Process metrics, such as the current stage or status, are Pega-defined properties. Pega exposes process metrics automatically.

Explanation

Process metrics, such as the current stage or status, are Pega-defined properties. Pega exposes process metrics automatically.

76. A report contains five columns of data about sales quotes. The case ID (.pyID)The currently assigned sales representative (.pxAssignedOperatorID)The creation date of the sales quote (.pxCreateDate)The sales territory (.Territory)The expiration data of the quote (.ExpiryDate)The report identifies which two properties as unoptimized? (Choose Two)

Sales territory (.Territory)

Creation date (.pxCreateDate)

Expiration date (.ExpiryDate)

Assigned case worker (.pxAssignedOperatorID)

Case ID (.pyID)

Submit

77. Which of the following would be typical data stored in a local data source?

Insurance policy data

Case data

Customer details

Delivery options

78. In which types of UI controls are reference data from the local data source typically used?

Text field

Label

Button

Dropdown

79. Data transforms are often used prior to and after invoking the connector. What is the purpose of the data transforms?

Map data to the application data structure

Set authentication data for the request

Invoke parse rules on the connector response

Map data from the protocol-specific response format

Data transforms are used to map data from the integration data format to the application data structure.

Explanation

Data transforms are used to map data from the integration data format to the application data structure.

80. Select the statements that best describe the purpose of a data transform. (Choose Two)

Use data transforms to define the contents of a clipboard page in either read-only or read-write mode.

Use data transforms to set properties values on a given page, whether they are initial values or updated values.

1. Use a data transform to define how to take source data values — data that is in one format and class — and turn them into data of another format and class (the destination or target).
2. This is a very common use case for data transforms.

Explanation

1. Use a data transform to define how to take source data values — data that is in one format and class — and turn them into data of another format and class (the destination or target).
2. This is a very common use case for data transforms.

Submit

81. A loan request application includes an approval process as follows:

Requests for an amount greater than USD30,000 are reviewed by a credit manager or a vice president. If the customer's credit score is less than 720, then the request is reviewed by a vice president. Otherwise, the request is reviewed by a credit manager. Requests for USD30,000 or less are reviewed by a loan officer.

Which rule would you use to automatically advance the request to the correct user?

Map value

When rule

Decision tree

Decision table

82. You are adding a date of birth field to a job application form. You want to make sure that the user enters a date in the past. How would you support this requirement?

Use a calendar control that tests the date.

Use a when condition to test whether the date is in the past or in the future.

Use a declare expression to test the date.

Use a validate rule to test the date.

A validate rule can use a function to test the date.

Explanation

A validate rule can use a function to test the date.

83. An application that processes loan requests must collect information from borrowers to check their credit report. If a borrower is married, the borrower must provide this information for a spouse as well. For each person, the application requires a first name, last name, and taxpayer ID.

What is the best way to implement this requirement?

Add fields for both the borrower and the spouse to the UI and make both sets of fields required.

Every extra unit of information in a dialogue competes with the relevant units of information and diminishes their relative visibility. Use the visible when feature whenever appropriate so that users are not inundated with information until needed.

Explanation

Every extra unit of information in a dialogue competes with the relevant units of information and diminishes their relative visibility. Use the visible when feature whenever appropriate so that users are not inundated with information until needed.

84. Users can access an apartment search application from laptops and mobile phones. Pictures of the apartments, descriptions, and agent information are organized in columns.

How do you implement the screen to accommodate both laptops and mobile displays?

Use a smart layout.

Use a column layout.

Use a screen layout.

Use a dynamic layout.

You can configure a dynamic layout to arrange UI elements in different formats at different screen sizes.

Explanation

You can configure a dynamic layout to arrange UI elements in different formats at different screen sizes.

85. An employee medical coverage form contains a check box to indicate whether the employee has a spouse. When a user selects the check box, the form displays a section that includes additional fields for entering information about the spouse.

How do you configure the form?

Set visibility to if not blank in the section containing information about the spouse.

Add a visible when condition to the section containing information about the spouse

Set visibility to if not blank in the cell containing the check box.

Add a visible when condition in the cell containing check box.

You use the when condition to test whether the check box value is true or false.

Explanation

You use the when condition to test whether the check box value is true or false.

86. A report contains columns for case IDs, creation dates, managers, and office locations. How do you configure a report filter condition so that it displays only cases created in the Atlanta office?

Case ID column equals Atlanta.

Case ID column does not equal Atlanta.

Office location column does not equal Atlanta.

Office location column equals Atlanta.

87. You want to enable external systems to retrieve the claim history for a given customer from a Pega claims application. What component is required to implement this requirement?

Connector

Local data source

Data page

Service

A service rule allows you to expose a service. Pega is acting as the service and the external system as the client.

Explanation

A service rule allows you to expose a service. Pega is acting as the service and the external system as the client.

88. Which tool do you use to view case data currently in memory?

The Property Optimization wizard

The Tracer tool

Live UI

The Clipboard tool

89. Given this partial user story: Customer must provide at least one of the following three telephone numbers: •Home •Office •Mobile Which property mode should be used to collect and identify this phone number by name?

Value Group

Single Value

Page List

Page

A

Explanation

A

90. You have a case type for account opening which has a credit check child case. You have configured data propagation on the account case for the credit check subcase. Which of the following statements described the data propagation feature?

Data is propagated when the credit check case is updated.

Data is propagated when the account case is updated.

Data is propagated every time the account case is saved to the database

Data is propagated when the credit check child case is created.

A

Explanation

A

91. A step in an activity for creating correspondence calls another activity to send correspondence to all the parties listed on the pyWorkParty page. How would you configure the first activity to achieve the desired behavior?

Specify pyWorkParty as a parameter page

Specify pyWorkParty as the primary page.

Specify pyWorkParty as a step page.

Specify pyWorkParty as a clipboard page.

A

Explanation

A

92. Users can access an apartment search application from laptops and mobile phones. Pictures of the apartments, descriptions, and agent information are organized in columns. How do you implement the screen to accommodate both laptops and mobile displays?

Use a column layout.

Use a screen layout.

Use a smart layout.

Use a dynamic layout.

A

Explanation

A

93. An online computer equipment vendor maintains an inventory database of more than 1000 items. While shopping, users select items from a list. How do you configure the field so that it displays the items?

Configure a drop-down list using a property containing a local list of items as the data source

Configure a drop-down list using a clipboard page as the data source.

Configure an auto-complete control using a data page as the data source.

Configure an auto-complete control using a clipboard page as the data source.

A

Explanation

A

94. An application that processes loan requests must collect information from borrowers to check their credit report. If a borrower is married, the borrower must provide this information for a spouse as well. For each person, the application requires a first name, last name, and taxpayer ID. What is the best way to implement this requirement?

Add fields for both the borrower and the spouse to the UI and make both sets of fields required.

A

Explanation

A

95. An employee medical coverage form contains a check box to indicate whether the employee has a spouse. When a user selects the check box, the form displays a section that includes additional fields for entering information about the spouse. How do you configure the form?

Add a visible when condition in the cell containing check box.

Set visibility to if not blank in the cell containing the check box.

Set visibility to if not blank in the section containing information about the spouse.

Add a visible when condition to the section containing information about the spouse.

A

Explanation

A

96. A data page has the Refresh if Older Than field set to five minutes. When will the data page reload?

Depends on when it is accessed

Five minutes after it was created and never again

Five minutes after it was last accessed

Five minutes after it was last updated

A

Explanation

A

97. A report contains columns for case IDs, creation dates, managers, and office locations. How do you configure a report filter condition so that it displays only cases created in the Atlanta office?

Office location column equals Atlanta.

Office location column does not equal Atlanta

Case ID column equals Atlanta.

Case ID column does not equal Atlanta.

A

Explanation

A

98. Select the statement that best describes the use of the Database Table Class Mapping tool. (Choose One)

To map the content of a database table to a data page, for use in an application as reference data.

To import data from an external database into a Data Table, for use in an application as reference data.

A

Explanation

A

99. Review the following Decision Table:If the credit score is 723 and the outstanding balance is 2157, which value will be returned?

ApproveLevel1

ApproveLevel3

Reject

ApproveLevel2

100. When does data propagation occur?

When a subcase's or spin-off case’s value changes

When the subcase or spin-off case is created

Whenever a parent's value changes

When a parent's value changes and a data transform is used to configure the data propagation

101. Your organization has a standard loan request report that contains columns for loan ID, loan officer, work status, and a loan creation date. A manager requests a report that includes only loans created in the previous quarter and do not have a status of New. How would you configure the report filter to support this requirement?

Create two conditions: Work Status does not equal New, AND Creation Date is less than current quarter.

Create two conditions: Work Status does not equal New, AND Creation Date is equal to Previous Quarter.

Create one condition: Work status does not equal New where Creation Date is equal to Previous Quarter.

Create two conditions: Work Condition equals New OR Creation Date does not equal Previous Quarter.

102. An application lets customers book airline reservations online. What would you expect to be defined as the case type in the application?

A reviewed reservation

An airline ticket

A reservation

A confirmation email

103. A report contains columns New Hire ID, New Hire Name, Start Date, and Location. The organization has offices invarious cities throughout the U.S. A facilities manager requests a report that includes only new hires who are locatedin the Atlanta and Boston offices and have a start date within 30 days of the report date.How would you configure the filter to support this requirement?

Create three conditions: Location equals Boston OR Location equals Atlanta AND Start Date equals next 30 days.

Create three conditions: Location equals Boston AND location equals Atlanta AND Start Date equals next 30 days.

Create one condition: Location equals Boston Atlanta, Start Date equals next 30 days.

Create three conditions: Location equals Boston OR Location equals Atlanta AND Start Date equals 30 days.

104. While preparing to release an application, you notice a guardrail violation on an activity you wrote. The activity copiesthe customer's shipping address to their billing address. How do you address this guardrail violation?

Replace the activity with a data transform to copy the shipping address to the billing address.

Justify the warning, since an activity is required in this situation.

Ignore the warning if the compliance score is 90 or greater, since the application is considered ready for release.

Identify an API activity to use in place of the activity you wrote.

105. You need to copy data from a page with customer data to a page used for a credit card payment. Most of theproperties can be mapped as-is, but the first and last names must be concatenated into a full name. Which rule typewould you use to copy the content?

Data page

Data transform

Function

Declare expression

106. In the event-action model of dynamic UI, which of the following statements is correct regarding event processing?

Actions attached to an event execute in random order.

An event can be configured to perform multiple actions

An action can be performed for only one event per control

A control always has one or more action sets

107. If you need to access a table in an external database with advanced SQL, such as a complex join or a stored procedure, you need to use __________.

A report definition

A data page

The Database Table Class Mapping tool

A SQL connector

SQL connectors are suitable for complex SQL queries.

Explanation

SQL connectors are suitable for complex SQL queries.

108. You have a connector that fetches a list of currency exchange rates from an external system. Where do you invoke the connector from?

Activity

Flow action

Data page

Integrator shape in a flow

109. Two forms for an online shopping process use a declarative network to calculate values. The first form contains fields that display the item total amounts and the order total amount. The second form includes fields that display the taxes and the grand total that will be charged to the user's credit card. Which declare expression configuration would you use so that all the values on the second form are calculated only when the user reaches the form?

Forward chaining for the item total amounts and total order amount

Backward chaining for the taxes and grand total

Backward chaining for the item totals and total order amount

Forward chaining for the taxes and grand total

A

Explanation

A

110. A claim case records the items of loss. The property reference that describes an item of loss looks like this: .ItemOfLoss(1).Description. The property reference .ItemOfLoss(1) is an example of a __________ property?

Page

Single value

Page list

Value list

111. Which two statements identify why you should automate correspondence? (Choose Two)

Automating correspondence keeps all interested parties informed of the current status of a case.

Automating correspondence allows you to advance a case.

Automating correspondence allows for sending consistent information to users.

Automating correspondence allows you to send timely communication.

Submit

112. An expense report process requires the assignment for travel expenses to be routed to a specific auditor. The auditor is also a member of an auditing work group. How would you route the assignment so that the user receives it?

To the user

To the user's work group

To the user's work queue

To the user's manager

113. You are configuring a Confirm and Pay view that includes a payment type selection list. The following image shows the Credit Card Type selection list. One of the payment options is PayPal. PayPal requires users to confirm order details on the PayPal website. How do you configure the link to PayPal to display only when users select PayPal as their payment option?

Configure a visible when condition expression for the PayPal link control

Configure the PayPal link property to be visible when it is not blank.

Configure the visibility based on a required when condition.

Configure a disable when condition on the PayPal link property.

114. A manager has requested a report that shows the purchase requests for each of the regional cost centers. The manager wants to organize the results so the cost center appears only once on the report and the requests are listed under cost center. How would you configure the report definition?

Use the cost center column to group the results.

Summarize the requests column by count.

Filter the results so that only cost center and requests are included in the report.

Use the requests column to group the results.

115. A Service Request case type has a CustomerGrade property. How do you set the value of the CustomerGradeproperty to Silver when a service request case is created?

Configure the first connector in the first rule to set the Customergrade property value.

Configure the CustomerGrade property with a default value.

Configure a declare expression to set the CustomerGrade property value.

Configure the pyDefafult data transform to set the CustomerGrade property value.

116. You have created a series of forms for a vacation booking process. Declarative expressions are used to calculatevalues such as the cost of the flight, hotel, car rental, and taxes. The last form includes a field that displays the totalamount that will be charged on the user's credit card.How do you configure the calculations so that the total amount is calculated only when the user reaches the lastform?

Use the backward chaining option for all the expressions.

Use the forward chaining option for the total amount expression. Use backward chaining for all the otherexpressions.

Use the forward chaining option for all the expressions.

Use the backward chaining option for the total amount expression. Use forward chaining for all the otherexpressions.

117. You have designed a decision tree that you want to unit test. You want to test various input values to ensure that youget the expected results. How would you unit test your decision tree?

Check the decision tree for conflicts

Add the decision tree to a decision shape in your application and create cases using various input values.

Run the decision tree and enter values on the test page.

Check the decision tree for completeness.

118. The approval process for a purchase request case must satisfy the following requirements:-A request for office supplies placed by the Facilities department that totals EUR100 or less is automatically approved.-A request for software is automatically rejected unless requested by the IT department.-Any request that exceeds EUR1000 is automatically subject to review by the Auditing department.Which type of rule would you configure to satisfy this requirement?

Declare expression

When

Decision tree

Map value

119. During a playback, you place a flow in draft mode to address which limitation?

To save an incomplete flow.

To prevent additional shapes from being added to the flow.

To avoid errors due to references to rules that do not yet exist.

To allow users to choose decision outcomes if a decision rule if not yet available.

120. An insurance company offers personal property policies. Art collections and wine collections are category as specialtypes of personal properties. The company employs appraisers who are qualified to perform appraisals for either artcollections or wine collections. Appraisers can only perform appraisal assignment in their qualified field.How would you configure the router so that the assignment is worked on by a qualified appraiser?

Associate each appraiser to a work group that uses skill parameters.

Associate each appraiser to the appraiser work group.

Associate each appraiser to one of two work groups that correspond to the appraisal qualifications.

Associate each appraiser to a work group that uses work group parameters.

121. You are designing a form for an online bookstore to display new arrivals. The form is displayed on laptops and tablets.Pictures of the book covers are displayed in columns. The number of columns changes depending on the screen size.Which layout do you use to display the book cover pictures?

Screen layout

Dynamic layout

Column layout

Smart layout

122. The goal milestone in a service level defines:

The amount of time allowed for a user to advance a case to the next stage

The amount of time allowed before the case automatically advances to the next assignment

The amount of time in which the case or step must be completed

The amount of time in which the case or step should be completed

The goal milestone is the amount of time in which the business would like the case or step to be completed.

Explanation

The goal milestone is the amount of time in which the business would like the case or step to be completed.

123. You are configuring a declarative network that contains eleven declare expressions, which are used to calculate the interest rate for a home mortgage. For example, the target value Property Tax Assessment is used a source value when calculating the Assessed Property Value. The declare expressions use target values from other expressions to calculate their target values. The field displaying the interest rate appears on the approval form. To reduce the number of calculations in order to optimize performance, how would you configure the declare expressions?

Specify forward chaining in the declare expression that calculates the total interest rate value

Apply the declare expression in the approval flow action

Specify backward chaining in the total interest rate declare expression

To calculate the total interest rate value, add the all the declare expression target property values.

The total interest rate property will not be updated until the review form is opened. This approach avoids repeated, unnecessary calculations

Explanation

The total interest rate property will not be updated until the review form is opened. This approach avoids repeated, unnecessary calculations

124. Given this partial user story:

Customer must provide at least one of the following three telephone numbers:

•Home
•Office
•Mobile

Which property mode should be used to collect and identify this phone number by name?

Single Value

Page

Value Group

Page List

125. An application includes the property reference .Customer.Assets(3).AssetType.

The property type of .Assets(3) is a ________________.

Value List

Page Group

Page

Page List

126. Select the statements that best describe the purpose of a data transform. (Choose Two)

Use data transforms to define the contents of a clipboard page in either read-only or read-write mode.

Use data transforms to set properties values on a given page, whether they are initial values or updated values.

A

Explanation

A

Submit

127. Which two of the following rules can be used to direct case processing in a flow? (Choose Two)

Decision table

Declare expression

Correspondence

Data transform

When condition

A

Explanation

A

Submit

128. In which two of the following situations would you use a data transform? (Choose Two)

Create properties after the case has been created

Execute a flow action

Set default values when creating a case

Copy data from one page to another

Submit

129. You are configuring a standard email to automatically be sent to loan applicants informing them that their loan has been approved. The requirement states that the email must include values for the applicant's name, the loan office, and the loan amount. The email must also include boilerplate content stating the loan's terms and conditions, which is regularly updated. This content is in a paragraph rule shared by other standard emails throughout the organization. How would you configure your email?

Add placeholder text for the applicant's name, loan office, and amount. Also, insert the paragraph rule.

Insert applicant's name, loan office, and loan amount properties. Also, insert the paragraph rule.

Insert applicant's name, loan office, and loan amount properties. Also, copy and paste the paragraph content into your email.

130. On a service level, the passed deadline interval is measured from__________________________.

The end of the goal interval.

When a user begins the assignment.

When the assignment is ready for a user.

The end of the deadline interval.

131. An application that generates auto insurance quotes allows users to add a substitute transportation reimbursementoption to their coverage. Users who add this option are required to select one of three reimbursement levels:-UP to $10/day-UP to $25/day-UP to $50/dayYou must configure a form to add a check box that allows user to select the substitute transportation reimbursementoption. Users selecting this option are presented with three reimbursement levels as a set of radio buttons, similar tothe following example.How do you configure the UI to present users with the set of reimbursement levels only if the user selects thereimbursement option?

Add a validate rule to the check box control.

Add a refresh when condition on the check box control.

Add a validate rule to the flow action.

Add a visible when condition on the radio button control.

132. An application allows bank customer to apply for a credit card. During the process of applying for the credit card,customers can elect to transfer a balance to the card.The bank currently offers three balance transfer options for customers applying for a new credit card:1. 0 percent interest for 6 months.2. 2.9 percent interest for 12 months.3. 3.9 percent interest for 24 months.The bank requires that customers first elect whether to transfer a balance. If customers elect to transfer a balance,they must select one of the three options.Which control allows you to display all the balance transfer offers on the form, but only allows the customer to selectone offer?

Text area

Picklist

Radio buttons

Check box

133. In which situation is the use of an activity necessary?

Setting default values when creating a case

Writing a message to a log file

Calculating the age from the date of birth

Concatenating two strings values

134. When is the earliest opportunity for you to configure the user view for a step in a case life cycle in Pega Express?

You can configure the user view for a step after you add that step to the case life cycle.

You can configure the user view for a step after you create the entire case life cycle.

You can configure the user view for a step before you start creating the case life cycle.

You can configure the user view for a step any time after you configure the pick list data types.

135. You would like to use the Tracer tool to debug an error in your application. In which portal can you use the Tracer tool?

Pega Express

Case Manager Portal

Designer Studio

Case Worker Portal

136. You need to read from an external database table containing inventory data. Which two ways could you integratewith the table? (Choose Two)

Map the table to a class

Use a SQL listener

Use a data transform

Use a SQL connector

Submit

137. While testing a form, you need to verify the contents of a data page in memory. Which tool do you use to view thecurrent contents of the data page?

The Data Explorer

The Clipboard tool

Live UI

The Tracer

138. While preparing to release an application, you notice a guardrail violation on an activity you wrote. The activity copiesthe customer's shipping address to their billing address. How do you address this guardrail violation?

Ignore the warning if the compliance score is 90 or greater, since the application is considered ready for release.

Justify the warning, since an activity is required in this situation.

Identify an API activity to use in place of the activity you wrote.

Replace the activity with a data transform to copy the shipping address to the billing address.

139. An application contains three data types: A, B, and C. The class structure looks as follows:MyCo-App-DataMyCo-App-Data-AMyCo-App-Data-A-BMyCo-App-Data-A-B-CEach class has a data transform called SetValues. With the Call data transforms in superclass option selected. TheSetValues data transform sets the properties PropA and PropB, as shown in the table below.Class Property valueMyCo-App-Data PropA 1MyCo-App-Data-A PropB 2MyCo-App-Data-A-B PropA 3MyCo-App-Data-A-B-C probB 4What is the value of ProbA and ProbB after the Setvalues in MyCo-App-Data-A-B has been invoked?

PropA=1 and ProbB=4

PropA=1 and PropB=2

PropA=3 and PropB=4

PropA=3 and PropB=2

140. A customer data object has a list of addresses as depicted by the data model below. How would you define theaddress property in the customer class?

As a value list

As a page list

As a value group

As a page

141. An insurance claim case type is defined as follows:If the Review claim step is configured to set the status toPending-Investigation?

When the Review claim step starts.

When the Process claim stage starts.

When the Review claim step completes.

When Investigate claim step completes.

142. You are designing a form for an online bookstore to display new arrivals. In the form, the book cover pictures aredisplayed in a row, like words in a sentence. Once the row reaches the full width of the screen, it wraps around tobegin a new row.Which layout do you use to display the book cover pictures?

Column layout

Dynamic layout

Screen layout

Repeating layout

143. When processing an insurance claim you need to retrieve the customer's insurance policies from a web service. Youinvoke the connector from a_______________.

Data page

Flow action

Report definition

Data transform

144. You are developing a case life cycle for a human resources application. The first stage contains a single process named Collect Candidate Information. Which one of the following steps would you choose to include in the Collect Candidate Information process?

Determine compensation

Assess candidate

Collect personal information

Conduct interview

145. As part of an employee resignation case, the HR business partner assigned to the employee's department must perform an exit interview. You create a work party called HR Partner to model the HR business partner. HR Partner should be an instance of the ____________________ class or one of its descendants.

Data-Party-Operator

Data-Party-Person

Data-Party

Data-Party-Org

146. An application must test combinations of item size and color and return the result valid for allowed combinations. Which decision rule is best suited to this decision?

When

Strategy

Map Value

Scorecard

Map value rules are best suited to returning a result based on two conditions

Explanation

Map value rules are best suited to returning a result based on two conditions

147. Select the three true statements about the use of a BLOB field. (Choose Three)

A BLOB automatically exposes properties for reporting.

A BLOB provides flexibility by avoiding the need for schema changes when the data model changes.

A BLOB allows an application to read or write an entire case in one database transaction.

Case data can only be stored in a BLOB

A BLOB can store an object of any size

Submit

148. You have a data page with customer data. The data page is configured to reload if it is older than one hour. Which of the following best describes when the data page will be reloaded?

The data page reloads on the next access one hour after it was last accessed.

The data page reloads on the next access one hour after it was created.

The data page reloads automatically one hour after it was last accessed.

The data page reloads automatically one hour after it was created.

149. Two forms for an online shopping process use a declarative network to calculate values. The first form contains fields that display the item total amounts and the order total amount. The second form includes fields that display the taxes and the grand total that will be charged to the user's credit card. Which declare expression configuration would you use so that all the values on the second form are calculated only when the user reaches the form?

Forward chaining for the item total amounts and total order amount

Forward chaining for the taxes and grand total

Backward chaining for the item totals and total order amount

Backward chaining for the taxes and grand total

150. Which two of the following rules can be used to direct case processing in a flow? (Choose Two)

Correspondence

Decision table

When condition

Declare expression

Data transform

A decision table is used to derive a value that has one of a few possible outcomes, where each outcome can be detected by a test condition.

A when condition is used to evaluate a Boolean logical statement involving comparisons among values of properties to return true or false.

Explanation

A decision table is used to derive a value that has one of a few possible outcomes, where each outcome can be detected by a test condition.

A when condition is used to evaluate a Boolean logical statement involving comparisons among values of properties to return true or false.

Submit

151. An application includes the property reference .Customer.Assets(3).AssetType. The property type of .Assets(3) is a ________________.

Page List

Page Group

Value List

Page

A

Explanation

A

152. A company provides two applications to its employees. The first application is managed by the Accounting department, and allows employees to submit expense reports for reimbursement. The second application is managed by the IT department, and allows employees to submit support tickets for IT-related issues. Both applications require a data element to track the status of cases. Select the best strategy for implementing this requirement.

Check the inheritance path to determine if an appropriate data element is already available

Create a data element for each case type, because they may use different status values.

Create one data element in the class group layer for both applications to use.

Create one data element in the org layer for both applications to use.

153. A loan request process has specific approval requirements.-if the amount is for less than USD 1,000, the loan is automatically approved.-if the amount is greater than USD 1,000 and the loan type is an automobile loan, the loan must be approved by afinance manager.-if the amount is greater than USD 1,000 and the loan type is a mortgage, the loan must be approved by a vicepresident.Which rule type do you use to satisfy this requirement?

Data transform

Decision tree

When rule

Map value

154. A hotel reservation application has the following requirement: Users must select the destination city from a list ofoptions. The list is filtered on user entry. As a user types the city name, the list of options narrows.Which UI control allows you to implement this requirement?

Drop-down

List to List

AutoComplete

Menu

155. Customer Service Representatives (CSRs) review customer requests to replace a lost or stolen credit card.Once the request is approved, customers are notified by letter of the expected delivery date for a replacement cardtypically within one week.The CSR must be able to prioritize time-sensitive requests such as requests from customers who are on vacation.Time-sensitive requests are prioritized as follows:-Customers receive a replacement card the next day.-Fulfillment requests are sent to a dedicated workbasket.-Customers receive notification of the expected delivery date by email.Which action for time-sensitive requests do you implement as an optional action?

Send the notification by email rather than letter.

Router fulfillment requests to a dedicated workbasket.

Update the notification with the expected delivery date.

Increase the urgency for time-sensitive requests.

156. What is the purpose of the pyDefault data transform?

To set internal case properties, never override pyDefault

To use the superclass feature

To initialize property values when a case is created

To propagate property values from a parent to a subcase

157. A flow action ______________________________. (Choose Two)

Identifies the user interface to present to a user

Cannot be run in draft mode

Indicates a possible outcome for an automated decision

Indicates a possible outcome for an assignment.

Submit

158. You are writing an activity. The third step needs to be skipped if the TotalAmount is less than USD500.Which option would you use to achieve this behavior?

Label

Description

When

Jump

159. A form contains a text field for entering a U.S. postal code. You want to make sure that the user enters five digits in the field. What rule would you use to enforce this requirement?

Specify a validate rule in the property used by the field.

Use an integer property type in the text field.

Specify an edit validate rule in the property used by the text field

Use five character min/max settings on the field.

A

Explanation

A

160. A service level agreement rule describes the following behavior:

Urgency Adjustment Interval length Limit

Start of service level 20

Goal interval 10 8 hours

Deadline interval 20 24 hours

Passed Deadline interval 20 24 hours 3

The service level provides a four-hour initial delay. If the case urgency is set to 10 and the case reaches the assignment at 9 A.M. Monday, what is the assignment urgency at 12 P.M. Wednesday?

50

100

60

80

161. A parallel process is defined as ___________________________.

A process that is not part of the primary flow in the case life cycle

A process that executes over the same time period as other processes

A process that executes in the context of another process

A process that executes in the context of the current case

162. In which of the following situations would you use a rule circumstance to resolve the requirement?

A process does not execute if a user is not married.

A national insurance company requires a different minimum for liability coverage in each state.

An online order process optionally allows customers to update the credit card number saved with their account.

163. Which situation is best addressed through circumstancing?

Notify a manager if the "Review Request" assignment exceeds the established deadline of 24 hours.

164. An application allows bank customer to apply for a credit card. During the process of applying for the credit card,customers can elect to transfer a balance to the card.The bank currently offers three balance transfer options for customers applying for a new credit card:1. 0 percent interest for 6 months.2. 2.9 percent interest for 12 months.3. 3.9 percent interest for 24 months.The bank requires that customers first elect whether to transfer a balance. If customers elect to transfer a balance,they must select one of the three options.How do you present users with the set of balance transfer options only if they elect t transfer a balance to their card?

Add a refresh when condition on the layout containing the balance transfer offers.

Add a visible when condition on the layout containing the balance transfer offers.

Add a visible when condition on the check box for the balance transfer election.

Add a refresh when condition on the check box for the balance transfer election.

165. You need to read from an external database table containing inventory data. Which two ways could you integratewith the table? (Choose Two)

Use a data transform

Use a SQL connector

Map the table to a class

Use a SQL listener

Submit

166. Which of the following scenarios requires the configuration of an action set?

Clicking a button clears the fields in a form.

Selecting a check box shows additional input fields.

Reducing the screen width converts an inline to a stacked dynamic layout.

Entering a text value in a numeric field displays a custom error message.

167. Select the two items of information used to uniquely identify a rule. (Choose Two)

The class of the rule.

The status of the rule.

The application that uses the rule

The type of the rule.

The description of the rule

Submit

168. You want to capture the delivery method for a purchase request. The options are: Standard, premium, or next-day. You use the Data Model tab to create the property. How would you define the list with the options?

Radio button

Picklist

Text (paragraph)

Field group (list)

Use picklist to define a static list of options.

Explanation

Use picklist to define a static list of options.

169. Which statement best describes the evaluation of a When rule?

A When rule can only be used once in an application

A When rule can only evaluate a property of type true/false

A When rule can only return a true or false result

When rules are evaluated declaratively

170. Where do you set the Visible When condition to display a layout based on the click of a button?

On both the button and the layout

On the button

On the layout

On either the button or the layout

The Visible When condition on the layout turns the display of the section on and off.

Explanation

The Visible When condition on the layout turns the display of the section on and off.

171. You need to fetch exchange rates that are updated on a daily basis from a web service and make them available in your application using a data page. Which scope would you select for the data page?

Application

Node

Request

Thread

Use the node scope to share the page for all applications on the node.

Explanation

Use the node scope to share the page for all applications on the node.

172. Which situation is best addressed through circumstancing?

Notify a manager if the "Review Request" assignment exceeds the established deadline of 24 hours.

Circumstancing allows you to adjust execution of a process step based on case conditions. Altering the content of correspondence based on a specific condition, such as the state of residence for a loan applicant, is a common use case for circumstancing.

Explanation

Circumstancing allows you to adjust execution of a process step based on case conditions. Altering the content of correspondence based on a specific condition, such as the state of residence for a loan applicant, is a common use case for circumstancing.

173. A data page has the Refresh if Older Than field set to five minutes. When will the data page reload?

Five minutes after it was last updated

Five minutes after it was created and never again

Five minutes after it was last accessed

Depends on when it is accessed

174. Which two are benefits of following Pega guardrails. (Choose Two)

Guardrails help developers to track compliance with Pega best practices.

Guardrails help developers build applications that are easier to maintain and have fewer defects.

Guardrails help managers create schedules for efficiently allocating developer resources.

Guardrails help project managers ensure that applications are completed on time.

Submit

175. You are designing hotel booking forms for a travel application.The first form contains two fields in which users enter a room type and the length of stay in days. A third fielddisplays the total cost of the room.The second form contains a field in which users select additional-cost options such as sight-seeing tour. A second fielddisplays the total cost of the options.The third form contains a field that displays the grand total of the room and options.Which two properties are considered source properties for the declare expression used to calculate the grand total?(Choose Two)

Length of stay

Options

Total cost of room

Total cost of options

Submit

176. A data page holds the local weather information based on the user's address. The data page's Reload if older Thanfield is set to 15 minutes.The data page is created at 09:12.At 09:20 the user requests the weather information.At 09:42 the user requests the weather information.When is the data page reloaded?

09:20

09:42

09:27

09:35

177. A report contains columns New Hire ID, New Hire Name, Start Date, and Location. The organization has offices invarious cities throughout the U.S. A facilities manager requests a report that includes only new hires who are locatedin the Atlanta and Boston offices and have a start date within 30 days of the report date.How would you configure the filter to support this requirement?

Create three conditions: Location equals Boston OR Location equals Atlanta AND Start Date equals 30 days.

Create three conditions: Location equals Boston OR Location equals Atlanta AND Start Date equals next 30 days.

Create one condition: Location equals Boston Atlanta, Start Date equals next 30 days.

Create three conditions: Location equals Boston AND location equals Atlanta AND Start Date equals next 30 days.

178. Which two tasks do system architects perform on a Pega project? (Choose Two)

Develop feature prototypes

Identify business objectives for an application

Configure UI forms

Define application requirements

Submit

179. In an mortgage application, the user creates a loan request. In order for the loan request to be approved, the loan officer must receive the results of an appraisal. How would you configure the case types to reflect their relationship?

Make loan request a parent case type, and appraisal a child case type

Make appraisal a parent case type, and loan request a child case type.

Make mortgage a parent case type. Make loan request and appraisal child case types.

Make both loan request and appraisal peer case types.

180. A requirement states that you must add a control that shows a list of book titles. The titles change on a daily basis. The book records are maintained on a database. The control must show the most current information. The organization schedules updates to the application on a weekly basis. Which of the following configurations would you use?

Add a drop-down control and source the list using the property that identifies the items in the list.

Add a radio button control that identifies each employee with a button

Add a drop-down control and source the list using a data page.

Add a drop-down control and use a list of items in the control's property

181. Which rule warning do you address by justifying the current design?

An application is being prepared for release, and a process is still in draft mode.

An application uses an activity to add a customer information to a system of record.

A property on a report is not optimized, and may affect report performance.

An application uses an activity to calculate a promotional discount.

Writing data to a system of record may require use of an activity, even though activity use triggers a guardrail violation. In this situation, the violation should be justified.

Explanation

Writing data to a system of record may require use of an activity, even though activity use triggers a guardrail violation. In this situation, the violation should be justified.

182. You have a case type for account opening which has a credit check child case. You have configured data propagation on the account case for the credit check subcase. Which of the following statements described the data propagation feature?

Data is propagated when the credit check child case is created.

Data is propagated every time the account case is saved to the database

Data is propagated when the account case is updated.

Data is propagated when the credit check case is updated.

183. An online computer equipment vendor maintains an inventory database of more than 1000 items. While shopping, users select items from a list.

How do you configure the field so that it displays the items?

Configure a drop-down list using a clipboard page as the data source.

Configure a drop-down list using a property containing a local list of items as the data source.

Configure an auto-complete control using a clipboard page as the data source.

Configure an auto-complete control using a data page as the data source.

A data page allows you to source data from the database. The autocomplete allows the user to filter the list of items as they type.

Explanation

A data page allows you to source data from the database. The autocomplete allows the user to filter the list of items as they type.

184. Which three rule types can you reference in a correspondence rule to provide content for the correspondence? (Choose Three)

Section

Data transform

Property

Validate

Paragraph

A

Explanation

A

Submit

185. Your organization replaces employee laptops two years from the date the laptop was issued. A manager asks you to create a report that shows, for each employee, the number of weeks until the replacement date. Report columns include Employee ID, Laptop ID, and Issue Date. How would you configure the report definition to provide the requested information?

Create a Weeks to Replacement column. In the Issue Date column use a function to calculate the value.

Create a Weeks Until Replacement column and use a function in the column to calculate the value.

Create a Weeks Until Replacement column and update values in the database on a weekly basis.

A

Explanation

A

186. Consider a purchase request case. In which of the following situations would you use a local data source?

To store options for the priority of a purchase request

To store purchase request line items

To store purchase request case data

To store customer data retrieved from a system of record

A

Explanation

A

187. You need to fetch exchange rates that are updated on a daily basis from a web service and make them available in your application using a data page. Which scope would you select for the data page?

Request

Application

Node

Thread

188. While testing a form, you need to verify the contents of a data page in memory. Which tool do you use to view thecurrent contents of the data page?

The Data Explorer

The Clipboard tool

Live UI

The Tracer

189. Which issue is identified as a Guardrail violation?

An activity writes to the wrong clipboard page.

A decision tree contains a branch that cannot be reached.

A decision table returns an invalid connector name to a flow.

A property in a report has not been optimized.

190. You are adding steps to a process named Select Insurance Policy. Which one of the following steps would be named correctly?

Confirm employee

Confirm employee and employer

Employee confirmation

Confirm

This name describes both the action and where the action is directed.

Explanation

This name describes both the action and where the action is directed.

191. Which statement demonstrates a well-written requirement?

Eliminate order processing delays due to incorrect routing of requests

A user should be able to cancel an order at any time.

System displays "Authorization History and Summary" for the last 12 months

User must be able to select "Add Temporary Member" when "Authorization is Required" notice is displayed.

This statement describes processing needs that must be met for processing work and data in the application.

Explanation

This statement describes processing needs that must be met for processing work and data in the application.

192. Where can you NOT include a paragraph?

Flow

Correspondence

Section

Paragraph

193. Select the statement that best describes the use of the Database Table Class Mapping tool. (Choose One)

To map the content of a database table to a data page, for use in an application as reference data.

To import data from an external database into a Data Table, for use in an application as reference data.

The Database Table Class Mapping tool provides a wizard that generates all the artifacts needed to interact with reference data in an external database. These artifacts include a data class, a database table instance and a link between those two artifacts.

Explanation

The Database Table Class Mapping tool provides a wizard that generates all the artifacts needed to interact with reference data in an external database. These artifacts include a data class, a database table instance and a link between those two artifacts.

194. What three questions should you ask when creating a correspondence? (Choose Three)

When does the correspondence need to be sent?

Which email server should the correspondence use?

Who is the user that receives the correspondence?

How will the correspondence be sent?

How often should you send the correspondence?

Submit

195. While preparing to release an application, you notice a guardrail violation on an activity you wrote. The activity copiesthe customer's shipping address to their billing address. How do you address this guardrail violation?

Replace the activity with a data transform to copy the shipping address to the billing address.

Justify the warning, since an activity is required in this situation.

Ignore the warning if the compliance score is 90 or greater, since the application is considered ready for release.

Identify an API activity to use in place of the activity you wrote.

196. Users can access an apartment hunting application from different devices with different screen sizes. A screendisplays the photos of available properties. By default, the photos are displayed in three columns. When the screenwidth is less than 800 pixels, the photos should be displayed in two columns.How do you implement the screen for this requirement?

Use a dynamic layout with a responsive breakpoint at 800 pixels to change from inline-grid triple to inline-griddouble format.

Circumstance the section rule to display different number of columns at different screen sizes.

Use a column layout with a responsive breakpoint at 800 pixels to hide the left column.

Circumstance the layout to display different number of columns at different screen sizes.

197. In a hotel reservation application, a form displays a list of hotels with available rooms based on the check-in andcheck-out dates entered by users.How do you configure the form to refresh the hotel list whenever the check-in or check-out date changes?

Configure edit validates on the date fields to refresh the section when the date values change.

Configure an action set on the hotel list display to refresh the section when the hotel list changes.

Display the hotel in an embedded section with a visible when condition.

Configure action sets on the date fields to refresh the section when the date values change.

198. An online shopping application collects and displays the user's shipping address. An address contains a street number, city, state, and zip code. This information is always presented together in a group, whether it is used for an order confirmation or for invoice billing. Which UI component is appropriate for displaying the address information?

Control

Section

Portal

Skin

Correct! Section groups work information and functionality by context and purpose

Explanation

Correct! Section groups work information and functionality by context and purpose

199. The terms "connector" and "service" are from the perspective of __________.

200. You are configuring a grid layout so that a row is set in focus when a user right-clicks a row, uses the up key, or uses the down key. In addition, when the user clicks a row, it is shown in edit mode. How do you configure the grid to support this requirement?

Use two action sets: one for the right-click action, and one for the up key and down key actions

Use one action set for the click, up key, and down key actions.

Use two action sets: one for the right-click event, and one for the up key and down key events.

Use one action set for the click, up key, and down key events.

A

Explanation

A

	Urgency Adjustment	Interval length	Limit
Start of service level	20
Goal interval	10	8 hours
Deadline interval	20	24 hours
Passed Deadline interval	20	24 hours	3

CSA 7.3/7.4 Completo

1. You are helping to implement the technical components of a new application. Before you can begin work, you must obtain definitions of the business processes and service-level agreements. Which members of the development team would you go to for this information?

2.

What first name or nickname would you like us to use?

2. Which requirement could be satisfied with a user action?

3. Adding instructions to a step ____________.

4. A step in the case life cycle has a case status value of Pending-Approval. When is the status of the case automatically updated?

5. What type of step typically requires contextual instructions?

6. In an mortgage application, the user creates a loan request. In order for the loan request to be approved, the loan officer must receive the results of an appraisal. How would you configure the case types to reflect their relationship?

7. In an online shopping application, the primary case type PurchaseOrder has two child case types: Payment and Packaging. In processing PurchaseOrder case PO-11, Payment case Pay-37 and Packaging case Pac-56 are created. Which statement about the processing of PO-11, Pay-37, and Pac-56 is correct?

8. An application references a data element found in the Work-class. How is this rule inherited by the application?

9. Select the two items of information used to uniquely identify a rule. (Choose Two)

10. You check out a rule to update it. While the rule is checked out, another developer decides to test a case type by creating and processing the case. What happens when the application attempts to use the rule you checked out?

11. A candidate's language skills are captured in a candidate case. What type of property is used to capture the candidate's language skill if the property reference looks like this: .Language(Spanish)?

12. pyWorkPage stores which type of information?

14. When does data propagation occur?

15. You have a data page with customer data. The data page is configured to reload if it is older than one hour. Which of the following best describes when the data page will reload?

16. In which types of UI control is reference data from the local data source typically used?

17. The External Database Table Class Mapping wizard creates a data class and a database table. How do you make this data available to your application?

18. Which variable in the assignment urgency calculation enables users to increment the service level urgency on a case-by-case basis?

19. Automating decisions based on business logic enables ___________________________.

20. An application change goes into effect on June 15, 2016. Due to this change, two fields are added to a user form to collect information for compliance purposes. Assuming that today is April 30, 2016, how should you configure circumstancing for the form?

21. Which of the following sets represent action sets (event > action) in Pega Platform? (Choose Two)

23. Which type of data is exposed by default?

25. When unit testing a rule, you can identify a data transform to use during the test. What does the data transform do?

26. The user enters a response on a form and clicks Submit. The Pega Platform application returns an error. Which tool can you use to determine the cause of the error in your application?

27. A customer wants to copy the contents of a previous order to their current order. What rule type do you use to copythe order contents?

29. Mach each data page scope to its use case.

30. While reviewing a UI form in a Grooming/Elaboration playback, you notice a typo in the label of a field. Which tool allows you to identify the section rule that contains the incorrect label?

31. While reviewing a UI form in a Grooming/Elaboration playback, you notice a typo in the label of a field. Which toolallows you to identify the section rule that contains the incorrect label?

32. Which requirement would be implemented through circumstancing?

33. In which situation does a case type for software upgrade requests reuse a rule through pattern inheritance?

34. A customer wants to copy the contents of a previous order to their current order. What rule type do you use to copythe order contents?

35. Which rule can only return a true/false result when evaluating a condition?

37. There are several components involved when calling an external service. A data transform is typically used whenprocessing the response returned by the external system. What is the purpose of that data transform?

38. A purchase request case creates a child case to check inventory. If products are added to or deleted from thepurchase request, the data needs to be propagated to the check inventory case.What is true with regards to the data propagation feature for the above requirement?

40. Match each process step to the appropriate flow shape.

41. To qualify for an automobile loan, the applicant must have a credit score of at least 740 and must be currentlyemployed. If either condition is not met, the loan request cannot be submitted.How would you configure the process to support this requirement?

42. You need to add a button to a user form. When the button is pressed, the application invokes a data transform, thencreate a new case.How do you implement this functionality?

43. You are implementing a UI form collecting job applicant information. Users must provide values to certain fieldsbefore submitting the form.Which configuration adds asterisks to indicate the mandatory fields on the form?

45. You have created a new report that contains a list of employees, hire dates, and managers. You have been asked todisplay each manager in a row. Beneath each manager row, you must list the manager's employees and their hiredates. How would you support this request?

50. You have been asked to configure a rule for use in a business process to evaluate multiple property values and returna text value as a result. Which type of rule satisfies this requirement?

51. In an insurance claim application there is a claim case defined. The claim case creates a top-level repair case.Data propagation is configured to copy relevant claim data into the repair case.What is true with regards to the data propagation feature for subsequent updates to the claim case?

52. Which requirement is satisfied by configuring a service level agreement?

53. You are assigned to a team to develop a case life cycle design for an application. Why would you design the case life cycle?

54. A loan origination case requires the loan application be routed to an underwriter for verification. Any underwriter in the department can complete the verification. How would you route the verification assignment?

55. The primary purpose of a service level is to __________.

56. What three questions can you ask to help you plan user views? (Choose Three)

57. What is the difference between a requirement and specification?

58. Which requirement could be satisfied with a user action?

59. What three questions should you ask when creating a correspondence? (Choose Three)

60. Which two statements identify why you should automate correspondence? (Choose Two)

61. Adding instructions to a step ____________ (Choose One)

62. With whom does a system architect work to develop application specifications?

63. You check out a rule to update it. While the rule is checked out, another developer decides to test a case type by creating and processing the case. What happens when the application attempts to use the rule you checked out?

64. ______ is a template for creating _____ at run time. Fill in the blanks with one of the following pairs.

66. A candidate's language skills are captured in a candidate case. What type of property is used to capture the candidate's language skill if the property reference looks like this: .Language(Spanish)?

67. PyWorkPage stores which type of information?

68. An expense report process requires the assignment for travel expenses to be routed to a specific auditor. The auditor is also a member of an auditing work group. How would you route the assignment so that the user receives it?

70. Which situation should you address with a rule circumstance?

71. An application change goes into effect on June 15, 2016. Due to this change, two fields are added to a user form, to collect information for compliance purposes. Assuming that today is April 30, 2016, how should you configure circumstancing for the form?

72. An application recommends mobile phone plans to customers. Which type of rule predicts the customer response to an offer based on existing data?

73. The design document of an application states that the application must be implemented with UI responsiveness. Which behavior does the design require for the application?

75. Which type of data is exposed by default?

77. Which of the following would be typical data stored in a local data source?

78. In which types of UI controls are reference data from the local data source typically used?

79. Data transforms are often used prior to and after invoking the connector. What is the purpose of the data transforms?

80. Select the statements that best describe the purpose of a data transform. (Choose Two)

82. You are adding a date of birth field to a job application form. You want to make sure that the user enters a date in the past. How would you support this requirement?

84. Users can access an apartment search application from laptops and mobile phones. Pictures of the apartments, descriptions, and agent information are organized in columns. How do you implement the screen to accommodate both laptops and mobile displays?

85. An employee medical coverage form contains a check box to indicate whether the employee has a spouse. When a user selects the check box, the form displays a section that includes additional fields for entering information about the spouse.How do you configure the form?

86. A report contains columns for case IDs, creation dates, managers, and office locations. How do you configure a report filter condition so that it displays only cases created in the Atlanta office?

87. You want to enable external systems to retrieve the claim history for a given customer from a Pega claims application. What component is required to implement this requirement?

88. Which tool do you use to view case data currently in memory?

89. Given this partial user story: Customer must provide at least one of the following three telephone numbers: •Home •Office •Mobile Which property mode should be used to collect and identify this phone number by name?

90. You have a case type for account opening which has a credit check child case. You have configured data propagation on the account case for the credit check subcase. Which of the following statements described the data propagation feature?

91. A step in an activity for creating correspondence calls another activity to send correspondence to all the parties listed on the pyWorkParty page. How would you configure the first activity to achieve the desired behavior?

92. Users can access an apartment search application from laptops and mobile phones. Pictures of the apartments, descriptions, and agent information are organized in columns. How do you implement the screen to accommodate both laptops and mobile displays?

93. An online computer equipment vendor maintains an inventory database of more than 1000 items. While shopping, users select items from a list. How do you configure the field so that it displays the items?

95. An employee medical coverage form contains a check box to indicate whether the employee has a spouse. When a user selects the check box, the form displays a section that includes additional fields for entering information about the spouse. How do you configure the form?

64. __ is a template for creating _ at run time. Fill in the blanks with one of the following pairs.

84. Users can access an apartment search application from laptops and mobile phones. Pictures of the apartments, descriptions, and agent information are organized in columns.

How do you implement the screen to accommodate both laptops and mobile displays?

85. An employee medical coverage form contains a check box to indicate whether the employee has a spouse. When a user selects the check box, the form displays a section that includes additional fields for entering information about the spouse.

How do you configure the form?

124. Given this partial user story:

Customer must provide at least one of the following three telephone numbers:

•Home
•Office
•Mobile

Which property mode should be used to collect and identify this phone number by name?

125. An application includes the property reference .Customer.Assets(3).AssetType.

The property type of .Assets(3) is a ________________.