Knowledge Check - Day 2
-
Where do we maintain the inspection types?
-
Inspection Lot
-
Inspection Plan
-
Material Master
-
None of the above. The inspection types are independent
-
Topics covered:
Introduction to QM
Master Data in QM (Inspection Plan, Quality Management View in Material Master, Inspection Types, MICs, Sampling Scheme, Inspection Lot)
Quiz Preview
- 2.
The characters used for inspection of a material are defined in:
-
Inspection Lot
-
Inspection Plan
-
Sampling Scheme
-
MIC
Correct Answer
A. MICExplanation
The characters used for inspection of a material are defined in the MIC (Master Inspection Characteristic). The MIC defines the specific characteristics that need to be inspected in a material, such as dimensions, tolerances, or qualitative attributes. It provides a detailed description of the inspection requirements and criteria for acceptance or rejection of the material. The MIC is an essential part of the inspection process and helps ensure that the material meets the required quality standards.Rate this question:
-
- 3.
Consider a scenario where a part is procured from a vendor. Which of the following statements are true?
-
Receiving cannot be done as the Inspection setup must be present for the material
-
Receiving can be done even if the inspection setup is missing for the material
-
MICs and Sampling scheme should be assigned in the Inspection Plan, only then a material can be received
-
Receiving can only be done if the inspection setup is present and the Inspection plan is created
Correct Answer
A. Receiving can be done even if the inspection setup is missing for the materialExplanation
Receiving can be done even if the inspection setup is missing for the material. This means that the material can be received from the vendor without the need for an inspection setup. However, it is important to note that this does not mean that the material will not be inspected at all. The inspection setup may be added later, and the material can be inspected at a later stage.Rate this question:
-
- 4.
Inspection Plan can only be created for:
-
Plant and Material
-
Inspection Lot and MICs
-
Inspection Lot, MICs and Sampling Scheme
-
None of the above
Correct Answer
A. Plant and MaterialExplanation
An inspection plan can only be created for a specific combination of Plant and Material. This is because the inspection plan defines the quality inspection requirements for a particular material at a specific plant. The inspection plan includes details such as the inspection characteristics, sampling procedures, and inspection methods to be used for the material at that plant. Therefore, the correct answer is Plant and Material.Rate this question:
-
- 5.
On the basis of which parameter, the origin of inspection can be determined?
-
Material Type
-
Inspection Type
-
Plant
-
All of the above
Correct Answer
A. Inspection TypeExplanation
The origin of inspection can be determined based on the "Inspection Type". This parameter refers to the specific type of inspection being conducted, such as quality control inspections, safety inspections, or compliance inspections. By analyzing the inspection type, one can identify the purpose and scope of the inspection, which can help determine where it originated from. The other parameters listed, such as Material Type and Plant, may be relevant factors in determining the specifics of the inspection, but they do not directly indicate the origin of the inspection.Rate this question:
-
- 6.
Multiple inspection types can be active for a material at the same time.
-
True
-
False
Correct Answer
A. TrueExplanation
Multiple inspection types can be active for a material at the same time means that different types of inspections, such as visual inspection, dimensional inspection, and performance testing, can be conducted simultaneously for a particular material. This allows for a comprehensive evaluation of the material's quality and ensures that all aspects of the material's specifications are met.Rate this question:
-
- 7.
How is the quantity to be inspected on an inspection lot determined?
-
Depends on the type of the material
-
Depends on the quantity received
-
Randomly
-
None of the above
Correct Answer
A. None of the aboveExplanation
The quantity to be inspected on an inspection lot is not determined based on the type of material or the quantity received. It is also not determined randomly. The quantity to be inspected is determined by the sampling procedure and the acceptable quality level specified in the inspection plan.Rate this question:
-
- 8.
How many types of MICs do exist?
-
There is no limit to it. User can define as many types of MICs he/she wants
-
Two types
-
Four Types
-
Only one type of MIC exists
Correct Answer
A. Two typesExplanation
The correct answer is "Two types" because the question is asking about the number of types of MICs that exist. The options provided include "Two types" as one of the choices, indicating that there are indeed two types of MICs. The other options of "Four types" and "Only one type of MIC exists" are incorrect as they do not align with the statement that there are two types of MICs.Rate this question:
-
- 9.
One MIC can be assigned to how many inspection plan?
-
One
-
Two
-
As many as we want
-
Not more than 100
Correct Answer
A. As many as we wantExplanation
The answer "As many as we want" suggests that there is no limit to the number of inspection plans that can be assigned to one MIC. This means that multiple inspection plans can be associated with a single MIC, allowing for flexibility and customization in the inspection process.Rate this question:
-
- 10.
What is the mandatory check to make MIC global and applicable in an inspection plan?
-
Complete Copy Model
-
Reference Characteristics
-
Released
-
Can no longer be used
Correct Answer
A. ReleasedExplanation
The correct answer is "Released." In order to make MIC (Measurement and Inspection Characteristic) global and applicable in an inspection plan, it needs to be released. This means that the MIC has been approved and is ready to be used for inspection purposes. Once a MIC is released, it can be utilized in various inspection plans across different processes or products.Rate this question:
-
Quiz Review Timeline (Updated): Mar 14, 2023 +
Our quizzes are rigorously reviewed, monitored and continuously updated by our expert board to maintain accuracy, relevance, and timeliness.
-
Current Version
-
Mar 14, 2023Quiz Edited by
ProProfs Editorial Team -
Jan 23, 2020Quiz Created by
Vaibhav Bhujade
Back to top