Measurement Quizzes & Trivia
Maps and Measurements Unit Post-Assessment (Earth Science Regents)
Questions: 10 | Attempts: 63 | Last updated: Jul 30, 2011
Sample QuestionThe diagram below represents part of Earth’s latitude-longitude system. What is the latitude and longitude of point A? (Standard 1.1c)
Questions: 100 | Attempts: 57 | Last updated: May 23, 2017
Sample QuestionThe cable fault that occurs because of moisture, a mechanical contact, or charred or burned conductor insulation is
Cedar kids: study guide
Questions: 8 | Attempts: 54 | Last updated: Jan 7, 2013
Sample QuestionVariables that are kept the same throughout the experiment are...?
Questions: 10 | Attempts: 53 | Last updated: Jan 22, 2015
Sample QuestionWhich is the correct technical inspection order for EVs according to the rules?
Fill in the Blanks with the correct measurements for each Letter. Good luck!
Questions: 10 | Attempts: 50 | Last updated: Aug 21, 2018
The Dual Laterlog measurement principle allows the measurement of resistivity using laterlog electrode configuration. It is a rather technical subject, but if it is relevant to you, then there is no other option than taking...
Questions: 37 | Attempts: 50 | Last updated: Jan 12, 2018
Sample QuestionSelect the applications of the Dual Laterlog Tool when combined with the Micro-Spherically Focused Log Tool.
Questions: 12 | Attempts: 45 | Last updated: Jan 17, 2013
Sample QuestionThe true shape of the Earth is best described as a
Questions: 20 | Attempts: 44 | Last updated: Oct 6, 2017
Sample Question1. The measurement of this biomarker is useful for establishing prognosis or disease severity in chronic HF and can be useful to achieve optimal dosing of medical therapy in select clinically euvolemic patients. PAGE 1505
Questions: 33 | Attempts: 43 | Last updated: Apr 25, 2014
This quiz evaluates your skill at cross-canceling units during fraction multiplication. You must complete this quiz for the results to be sent to your teacher.
Questions: 5 | Attempts: 38 | Last updated: Nov 24, 2017
Sample QuestionDetermine which units remain in your final answer fraction.
Questions: 10 | Attempts: 36 | Last updated: Jan 18, 2021
Sample QuestionLength of a pencil will be?
These guidelines are intended to provide Docomo interTouch Quality Specialists with the criteria for objective measurement of Docomo interTouch contacts. Categories and point values were designed such that scores are...
Questions: 15 | Attempts: 36 | Last updated: Jan 23, 2013
Sample QuestionChoose the correct SYMPTOM:Guest was not able to connect to the internet. Guest tried using his birthday for three times to no avail. Agent tried to assist the guest, while probing. Suddenly guest mentioned that he's able to connect upon using the number that was provided to him at the frontdesk. End of call.
Questions: 14 | Attempts: 35 | Last updated: Jan 24, 2015
Sample QuestionThe engineering design report must not exceed how many pages?
Questions: 10 | Attempts: 34 | Last updated: Nov 26, 2015
Sample QuestionWhich fact about the Egress Test is wrong?
Questions: 30 | Attempts: 33 | Last updated: Sep 26, 2014
Sample QuestionThe general screening method that is preferred by most educators is the Curriculum-Based Measurement.
Quiz on physics sections 1 and 2, focusing on definitions. Don't screw up the definition questions! You get free points if you just learn them.
Questions: 30 | Attempts: 33 | Last updated: Jan 24, 2013
Sample QuestionAn accurate experiment is one that has a small [...] error
Questions: 12 | Attempts: 22 | Last updated: Feb 8, 2021
Sample QuestionMeasurement is the process of _________size,weight or capacity of something.
Questions: 24 | Attempts: 20 | Last updated: Jan 19, 2021
Sample QuestionThe appropriate unit of measure for the length of ballpen is the ________.
Measurements are not so difficult, right? Well, with different systems come different types of units to measure things. Give it a go and tell us was it difficult!
Questions: 10 | Attempts: 20 | Last updated: Oct 23, 2017
Sample QuestionHow much is a bunch?
Topics Covered: Class 3 Length Unit on addition, subtraction, multiplication and division involving length
Questions: 10 | Attempts: 20 | Last updated: Jun 27, 2015
Question: | Attempts: 1064 | Last updated: Jun 21, 2021
Metrics are parameters or measures of quantitative assessment used to measure, compare, or track performance or production. Metrics can help control costs, improve quality, and identify important industry trends. To sign...
Question: | Attempts: 12365 | Last updated: Mar 3, 2021
Question: | Attempts: 22 | Last updated: Feb 8, 2021
Question: | Attempts: 610 | Last updated: Feb 5, 2021
Questions on the basic operation of fluid thermometers, bimetallic thermometers, thermocouples, and resistance temperature detectors (RTD's).
Question: | Attempts: 718 | Last updated: Jan 27, 2021
Questions on what level is and how continuous level measurement differs from single-point level detection
Question: | Attempts: 3442 | Last updated: Jan 20, 2021
Question: | Attempts: 20 | Last updated: Jan 19, 2021
Question: | Attempts: 36 | Last updated: Jan 18, 2021
The conversion of units is the conversion between different units of measurement for the same quantity. Typically, through multiplicative conversion factors. It is used to modify the units of a precise quantity without changing...
Question: | Attempts: 1253 | Last updated: Jan 8, 2021
Are you familiar with units of measurement? Unit of measure is a finite magnitude of a quantity, defined and developed by conversion or by law, employed as a standard for measurement of the same kind of capacity. Measurement is...
Question: | Attempts: 467 | Last updated: Jan 8, 2021
Welcome to "A Metric System Knowledge Quiz." The French standards meter originated in the 1970s as 1/ten-millionth of the distance from the equator to the North pole along a meridian through Paris. But it's history...
Question: | Attempts: 127 | Last updated: Dec 28, 2020
Please attempt this quiz only when you are ready and confident. You will need to score 8/10 to pass this quiz. Each student will only have one attempt. This quiz is compulsory quiz.
Question: | Attempts: 12310 | Last updated: Dec 21, 2020
Question: | Attempts: 131 | Last updated: Sep 23, 2020
Questions on what fluid flow, flow rate, and total flow are
Question: | Attempts: 4974 | Last updated: Jul 13, 2020
Calibration deals with the action or process of calibrating and mostly involves measuring instruments and putting numbers or lines or even letters on them to show how much of something you have taken. Try this trivia quiz on...
Question: | Attempts: 303 | Last updated: Sep 20, 2019
Being a professional, when it comes to some skills puts you in a better position to gunner the job you desire. Are you willing to become a carpenter or construction worker? How good are you when it comes to construction and...
Question: | Attempts: 972 | Last updated: Jul 30, 2019
Let's face it: Unless your measurement instruments get regular calibration, the measurements they make will become meaningless. Calibration keeps your equipment running within tolerance. Test your knowledge on this.
Question: | Attempts: 196 | Last updated: Jul 13, 2019
There are two basic systems of measurement one is customary and another is the metric system. In the United States, the customary system of measurement is followed, whereas the metric system or SI was first adopted in...
Question: | Attempts: 713 | Last updated: Jun 29, 2019
The United States has a distinct measuring system in comparison to other countries in the world. The system of measuring distance is based on measurements of the human body like an inch is based on the thumb, foot...
Question: | Attempts: 86 | Last updated: Jun 23, 2019
Question: | Attempts: 110 | Last updated: Dec 7, 2018
When following a recipe, you must know your measurements. Answer these questions on abbreviations and equivalents to see what you know and will need to know for the next quiz.
Question: | Attempts: 948 | Last updated: Sep 4, 2018
Fill in the Blanks with the correct measurements for each Letter. Good luck!
Question: | Attempts: 50 | Last updated: Aug 21, 2018
Converting metric and customary units to solve problems.
Question: | Attempts: 190 | Last updated: May 22, 2018
Do you know working with units? A unit of measurement is a definite magnitude of a quantity, defined and adopted by convention or by law, that is used as a standard for measurement of the same kind of...
Question: | Attempts: 103 | Last updated: Mar 13, 2018
The need to get volume, area, mass, distance and other properties on an object or entity is the act of measuring its length to make an informed decision on the particular object, take a quiz and see how much you know about...
Question: | Attempts: 113 | Last updated: Jan 18, 2018