Uottawa Cataloguers RDA 336-338 Fields Quiz
UOttawa Cataloguers RDA 336-338 Fields Quiz
I've developped this quiz using the source information (RDA and FRBR) to test your memory of the 336-338 fields and to allow you to expand this knowledger further by playing with some of the values that are given in RDA and MARC21. Take the opportunity to get back into RDA Toolkit and revisit some of the specific intstructions (6.9; 3.2; 3.3) and from the list found at (give url) You are probably getting familiar with these from derived and manque cote cataloguing records, so put yourself to the test. Read more
Resources:
1. MARC 33X tags Here is the link to the MARC 33X fields: http://www. Loc. Gov/marc/bibliographic/bd3xx. Html
2. RDA toolkit : Instructions 6.9; 3.2 and 3.3 at http://access. Rdatoolkit. Org/ (remember to your profile name and password in the upper right part of the toolbar.
- 1.
The 336, 337 and 338 fields have been defined in MARC21 to replace the following AACR2 element:
- A.
ISBD
- B.
GMD
- C.
Collation
- D.
Series
Correct Answer
B. GMDExplanation
The 336, 337, and 338 fields in MARC21 have been introduced to replace the GMD (General Material Designation) element in AACR2. GMD was used in AACR2 to provide information about the physical format or carrier of a resource, such as "DVD" or "CD-ROM." In MARC21, the GMD element has been replaced by the more specific and standardized fields 336 (Content Type), 337 (Media Type), and 338 (Carrier Type), which provide more detailed and standardized information about the content, media, and carrier of a resource.Rate this question:
-
- 2.
This replacement (the replacement of the answer to question one above) with the 336, 337 and 338 fields IN MARC21 and the instructions in RDA was the result of an ongoing debate about the efficacy of AACR2 to record the following 2 characteristics:
- A.
Collation versus series
- B.
Content versus carrier
- C.
Height versus width
- D.
Format versus inclusions
Correct Answer
B. Content versus carrierExplanation
The replacement of the answer to question one with the 336, 337, and 338 fields in MARC21 and the instructions in RDA was a result of an ongoing debate about the efficacy of AACR2 to record the characteristics of content versus carrier. This suggests that there was a need for a more effective way to differentiate and describe the content of a resource separately from its carrier or physical format.Rate this question:
-
- 3.
Field 337 is used to record
- A.
Media type
- B.
Content type
- C.
Carrier type
Correct Answer
A. Media typeExplanation
Field 337 is used to record the media type of a resource. This refers to the physical or digital format in which the resource is presented or stored. It helps to classify and describe the nature of the resource, such as whether it is a book, DVD, audio recording, or online resource. By recording the media type in Field 337, it allows for easier retrieval and organization of resources based on their format.Rate this question:
-
- 4.
Field 336 is used to record
- A.
Media type
- B.
Content type
- C.
Carrier type
Correct Answer
B. Content typeExplanation
Field 336 is used to record the content type of a resource. This refers to the form or genre of the content, such as text, audio, video, or image. It helps to categorize and describe the nature of the content in a standardized way, making it easier for users to search and retrieve specific types of resources.Rate this question:
-
- 5.
Field 338 is used to record
- A.
Media type
- B.
Content type
- C.
Carrier type
Correct Answer
C. Carrier typeExplanation
Field 338 is used to record the carrier type. This refers to the physical format or medium on which the content is stored or transmitted. It could include formats such as books, DVDs, CDs, or digital files. This information is useful for categorizing and organizing materials in a library or information system.Rate this question:
-
- 6.
The name of the element (e.g. rdamedia or rdacontent or rdacarrier) is included in the following subfield:
- A.
Subfield a
- B.
Subfield b
- C.
Subfield 2
- D.
Subfield 3
Correct Answer
C. Subfield 2Explanation
The name of the element (e.g. rdamedia or rdacontent or rdacarrier) is included in subfield 2.Rate this question:
-
- 7.
The name of the element (e.g. rdamedia or rdacontent or rdacarrier) in the 336-338 fields is included in the following subfield:
- A.
Subfield a
- B.
Subfield b
- C.
Subfield 2
- D.
Subfield 3
Correct Answer
C. Subfield 2Explanation
The name of the element in the 336-338 fields is included in subfield 2.Rate this question:
-
- 8.
The name of the element (e.g. rdamedia or rdacontent or rdacarrier) in the 336-338 fields is included in the following subfield:
- A.
Subfield a
- B.
Subfield b
- C.
Subfield 2
- D.
Subfield 3
Correct Answer
C. Subfield 2Explanation
In the 336-338 fields, the name of the element is included in subfield 2.Rate this question:
-
- 9.
The value or term (e.g. audio disc or text or audio) assigned to the matierlal in hand relating to fields 336-338 are listed in the following subfield
- A.
Subfield a
- B.
Subfield b
- C.
Subfield 2
- D.
Subfield 3
Correct Answer
A. Subfield aExplanation
The value or term assigned to the material in hand relating to fields 336-338 is listed in subfield a.Rate this question:
-
- 10.
The value or term (e.g. audio disc or text or audio) assigned to the matierlal in hand relating to fields 336-338 are listed in the following subfield
- A.
Subfield a
- B.
Subfield b
- C.
Subfield 2
- D.
Subfield 3
Correct Answer
A. Subfield aExplanation
The value or term assigned to the material in hand relating to fields 336-338 is listed in subfield a. Subfield a is used to indicate the content type of the material, such as audio disc or text or audio.Rate this question:
-
- 11.
The following subfield includes the coded information for fields 336-338:
- A.
Subfield a
- B.
Subfield b
- C.
Subfield 2
- D.
Subfield 3
Correct Answer
B. Subfield bExplanation
The subfield b includes the coded information for fields 336-338.Rate this question:
-
- 12.
The following two characteristics are CORE (mandatory to record) in RDA:
- A.
Carrier and media
- B.
Content and carrier
- C.
Media and content
Correct Answer
B. Content and carrierExplanation
The correct answer is "Content and carrier". In Resource Description and Access (RDA), these two characteristics are considered core and mandatory to record. "Content" refers to the intellectual or artistic content of a resource, while "carrier" refers to the physical or digital form in which the content is presented. Both of these characteristics are important for accurately describing and organizing resources in library catalogs and databases.Rate this question:
-
- 13.
The following characteristics (fields 336-337 in that order) are most common for a book (monograph)
- A.
Text unmediated volume
- B.
Computer program computer online resource
- C.
Two-dimensional moving image video videodisc
Correct Answer
A. Text unmediated volumeExplanation
The given answer "text unmediated volume" is the most common set of characteristics for a book (monograph). A book is typically made up of written text (text), is not accompanied by any additional media or technology (unmediated), and is bound together as a single physical unit (volume). This combination of characteristics is commonly associated with traditional printed books.Rate this question:
-
- 14.
The instruction for recording content type and the list of content types is found at RDA instruction: number in the toolkit:
- A.
3.2 and the list of content types is at 3.2.1.3
- B.
3.3 and the list of content types is at 3.3.1.3
- C.
6.9 and the list of content types is at 6.9.1.3
- D.
None of the above; the instructions are not in the toolkit at all
Correct Answer
C. 6.9 and the list of content types is at 6.9.1.3Explanation
The correct answer is 6.9 and the list of content types is at 6.9.1.3. This means that the instructions for recording content type and the list of content types can be found in section 6.9 of the RDA instruction toolkit, specifically at 6.9.1.3.Rate this question:
-
- 15.
The instruction for recording media type and the list of media types is found at RDA instruction: number in the toolkit:
- A.
3.2 and the list of media types is at 3.2.1.3
- B.
3.3 and the list of media types is at 3.3.1.3
- C.
6.9 and the list of media types is at 6.9.1.3
- D.
None of the above; the instructions are not in the toolkit at all
Correct Answer
A. 3.2 and the list of media types is at 3.2.1.3Explanation
The correct answer is 3.2 and the list of media types is at 3.2.1.3. This means that the instruction for recording media type can be found in section 3.2 of the RDA instruction toolkit, and the list of media types is located at 3.2.1.3 within that section.Rate this question:
-
- 16.
The instruction for recording carrier type and the list of carrier types is found at RDA instruction: number in the toolkit:
- A.
3.2 and the list of carrier types is at 3.2.1.3
- B.
3.3 and the list of carrier types is at 3.3.1.3
- C.
6.9 and the list of carrier types is at 6.9.1.3
- D.
None of the above; the instructions are not in the toolkit at all
Correct Answer
B. 3.3 and the list of carrier types is at 3.3.1.3Explanation
The correct answer is 3.3 and the list of carrier types is at 3.3.1.3. This is because the question asks for the location of the instruction for recording carrier type and the list of carrier types. The correct location is given as 3.3, and the specific location of the list of carrier types is 3.3.1.3.Rate this question:
-
- 17.
The following characteristics (fields 336-337 in that order) are most common for a print serial
- A.
Text unmediated volume
- B.
Computer program computer online resource
- C.
Two-dimensional moving image video videodisc
- D.
Serial unmediated volume
Correct Answer
A. Text unmediated volumeExplanation
The most common characteristics for a print serial are that it is in text format, unmediated (meaning it is not altered or interpreted by any other medium), and is in volume form. This means that it is typically a written publication that is not mediated by any other medium and is published in multiple volumes.Rate this question:
-
- 18.
If the resource being described is a multipart item record the following content type:
- A.
Record as many terms as are applicable to the resource being described.
- B.
Record only the content type that applies to the predominant part of the resource (if there is a predominant part)
- C.
Record the content types that apply to the most substantial parts of the resource (including the predominant part, if there is one)
- D.
Any of the above it being understood that the second and third choices are Alternatives (options)
Correct Answer
D. Any of the above it being understood that the second and third choices are Alternatives (options)Explanation
The correct answer is that any of the above options are acceptable, as long as it is understood that the second and third choices are alternatives. This means that when describing a multipart item record, you can record as many terms as are applicable to the resource, but you should only record the content type that applies to the predominant part of the resource if there is one. Additionally, you should record the content types that apply to the most substantial parts of the resource, including the predominant part if there is one.Rate this question:
-
- 19.
If the resource being described is a multipart item record the following media t type:
- A.
Record as many terms as are applicable to the resource being described.
- B.
Record only the media type that applies to the predominant part of the resource (if there is a predominant part)
- C.
Record only the media types that apply to the most substantial parts of the resource (including the predominant part, if there is one)
- D.
Any of the above it being understood that the second and third choices are Alternatives (options) that may not be applied locally
Correct Answer
D. Any of the above it being understood that the second and third choices are Alternatives (options) that may not be applied locallyExplanation
The correct answer is "Any of the above it being understood that the second and third choices are Alternatives (options) that may not be applied locally." This means that when describing a multipart item record, you can record as many applicable media types as necessary. If there is a predominant part, you should record the media type that applies to that part. Additionally, you should record the media types that apply to the most substantial parts of the resource, including the predominant part. However, it is also mentioned that these choices may not be applied locally, indicating that there may be variations in how this is implemented in different contexts.Rate this question:
-
- 20.
If the resource being described is a multipart item record the following carrrier type:
- A.
Record as many terms as are applicable to the resource being described.
- B.
Record only the carrier type that applies to the predominant part of the resource (if there is a predominant part)
- C.
Record only the carrier types that apply to the most substantial parts of the resource (including the predominant part, if there is one)
- D.
Any of the above it being understood that the second and third choices are Alternatives (options) that may not be applied locally
Correct Answer
D. Any of the above it being understood that the second and third choices are Alternatives (options) that may not be applied locallyExplanation
The correct answer is "Any of the above it being understood that the second and third choices are Alternatives (options) that may not be applied locally." This means that when describing a multipart item, you should record as many applicable carrier types as possible. If there is a predominant part, record the carrier type that applies to it. Additionally, record the carrier types that apply to the most substantial parts of the resource. However, it is understood that the second and third choices may not always be applicable in every local situation.Rate this question:
-
- 21.
This question is not graded, but is for format-specific exploration of the toolkit. Use the lists at 3.2.1.3 and 3.3.1.3; and 6.9.1.3 Please provide the following 336, 337 and 338 fields (subfields for 1)type and 2)source or name of element for any of the following formats that you happen to catalogue: 1. Online serial 336 337 338 2.Musical score 336 337 338 3.Musical sound recording (CD) 336 337 338 4. Online integrating resource 336 337 338 5. Print integrating resource 336 337 338 6. Atlas 336 337 338 7. Video on DVD 336 337 338 8. Cartographic Map 336 337 338 9. VHS video 336 337 338 10. Realia of an eye 336 337 338 11. A puppet 336 337 338 12 Audio recording on 33 album 336 337 338
Back to top