Sheriff And Police 10 Codes Quiz: Trivia
(68).jpg "Sheriff And Police 10 Codes Quiz: Trivia - Quiz")
Discover the secret language of law enforcement with our "Sheriff and Police 10 Codes" quiz! Designed for aspiring officers, enthusiasts, and curious minds alike, this quiz challenges you to master the 10-codes that police and sheriffs use to communicate quickly and efficiently on the job.
From routine traffic stops to high-stakes emergencies, knowing these codes is essential for quick and effective communication. Each question will test your knowledge of different codes, ranging from 10-4, signifying acknowledgment, to 10-99, indicating a wanted suspect is present.
Get ready to decode messages like a seasoned sheriff and sharpen your communication skills. Read morePerfect your knowledge of these codes to ace radio communication exams or to feel more connected to the action-packed world of policing. Take the quiz now and see if you can talk like the pros, using the concise and critical language of Sheriff and Police 10 Codes!
Sheriff and Police 10 Codes Questions and Answers
- 1.
Busy
- A.
10-14
- B.
10-57
- C.
10-32
- D.
10-6
Correct Answer
D. 10-6Explanation
The answer "10-6" is a police radio code that means "busy." This code is used to indicate that an officer is currently occupied and unable to respond to a call or request.Rate this question:
-
- 2.
Receiving poorly.
- A.
10-5
- B.
10-18
- C.
10-1
- D.
10-14
Correct Answer
C. 10-1Explanation
The given answer "10-1" is the correct one because it follows the pattern of subtracting 9 from the first number in each pair to get the second number. In this case, 10-9 equals 1, which matches the second number in the pair.Rate this question:
-
- 3.
Out of Service.
- A.
10-7
- B.
10-16
- C.
10-86
- D.
10-54
Correct Answer
A. 10-7Explanation
The correct answer is 10-7. In police radio codes, 10-7 means "out of service" or "out of commission." This code is used to indicate that a police officer or unit is not available for duty or is temporarily unavailable. It could be because they are taking a break, on a meal break, or dealing with a situation that requires them to be off-duty.Rate this question:
-
- 4.
Radio check.
- A.
10-3
- B.
10-45
- C.
10-15
- D.
10-31
Correct Answer
A. 10-3Explanation
10-3 is a commonly used radio code that means "stop transmitting" or "end of transmission." This code is used to indicate that the speaker has finished speaking and is now listening for a response. It is important to use this code to ensure clear communication and avoid overlapping transmissions on a radio channel.Rate this question:
-
- 5.
Relay
- A.
10-34
- B.
10-54
- C.
10-12
- D.
10-5
Correct Answer
D. 10-5Explanation
The given answer "10-5" is a common code used in radio communication, specifically in law enforcement. "10-5" means "Relay" and is used to request someone to pass a message or information to another person or department. This code is often used when an officer needs to communicate with a dispatcher or another unit.Rate this question:
-
- 6.
Acknowledged
- A.
10-15
- B.
10-4
- C.
10-19
- D.
10-34
Correct Answer
B. 10-4Explanation
10-4 is a commonly used phrase in radio communication, particularly in the context of law enforcement or emergency services. It is used to acknowledge that a message has been received and understood. The number 10 is a code used to represent different meanings in radio communication, and 10-4 specifically means "message received, understood, and acknowledged." It is a way for the person receiving the message to confirm that they have understood the information and are ready to proceed.Rate this question:
-
- 7.
Receiving well
- A.
10-15
- B.
10-23
- C.
10-4
- D.
10-2
Correct Answer
D. 10-2Explanation
The answer "10-2" is likely a response to a radio communication or walkie-talkie code. "10-2" is a commonly used code that means "Receiving well" or "Signal good." In radio communication, using codes like these helps to convey information quickly and efficiently.Rate this question:
-
- 8.
In service
- A.
10-8
- B.
10-18
- C.
10-76
- D.
10-25
Correct Answer
A. 10-8Explanation
The correct answer is 10-8. In police radio codes, 10-8 means "in service" or "available for duty." This code is used to indicate that an officer is ready to respond to calls or is actively patrolling their assigned area. It is a way for officers to communicate their status to dispatchers and other officers without using lengthy verbal explanations.Rate this question:
-
- 9.
Repeat
- A.
10-35
- B.
10-9
- C.
10-14
- D.
10-55
Correct Answer
B. 10-9Explanation
The given answer, 10-9, is the only option that follows the pattern of the previous numbers. Each number is subtracted from 10 to get the next number. Therefore, subtracting 9 from 10 gives us the next number in the sequence.Rate this question:
-
- 10.
Location
- A.
10-21
- B.
10-22
- C.
10-20
- D.
10-19
Correct Answer
C. 10-20Explanation
This is the code for requesting or providing a physical location. It's used in both routine and emergency communications.Rate this question:
-
- 11.
Arrived at scene.
- A.
10-18
- B.
10-21
- C.
10-22
- D.
10-23
Correct Answer
D. 10-23Explanation
This code is used to signal that a unit has arrived at the location of the incident they were dispatched to.Rate this question:
-
- 12.
Emergency, help needed.
- A.
10-31
- B.
10-32
- C.
10-33
- D.
10-34
Correct Answer
C. 10-33Explanation
This signals an emergency situation where there is a need for immediate assistance. This can be used by an officer in distress or when urgent backup is needed.Rate this question:
-
- 13.
Prisoner in custody.
- A.
10-13
- B.
10-14
- C.
10-15
- D.
10-16
Correct Answer
C. 10-15Explanation
Used when an officer has a suspect or prisoner in custody and is transporting them to a facility or holding location.Rate this question:
-
- 14.
Wanted/stolen indicated.
- A.
10-93
- B.
10-95
- C.
10-99
- D.
10-101
Correct Answer
C. 10-99Explanation
This indicates that a person, vehicle, or item has been flagged in their database as wanted or stolen. It alerts officers to exercise caution or to take specific actions.Rate this question:
-
- 15.
Awaiting your next message/assignment.
- A.
10-65
- B.
10-63
- C.
10-62
- D.
10-61
Correct Answer
A. 10-65Explanation
This code is used to indicate that an officer is standing by for further instructions or the next dispatch. It helps manage resources efficiently by preparing officers for upcoming tasks.Rate this question:
-
Quiz Review Timeline +
Our quizzes are rigorously reviewed, monitored and continuously updated by our expert board to maintain accuracy, relevance, and timeliness.
-
Current Version
-
Apr 19, 2024Quiz Edited by
ProProfs Editorial Team -
Apr 10, 2010Quiz Created by
Hardy659