Quality Technician Assessment - Lew
(50).webp "Quality Technician Assessment - Lew - Quiz")
This assessment should be used to determine if the following system objectives have been met:
Restate the Quality landscape changes Perform test result entry into Adobe FLEX Demonstrate the ability to perform area-specific transactions in Adobe FLEX Use the DED in MES to call and then enter tests results Articulate master data and system changes and how that impacts Quality Practice daily tasks such as test result entry, requesting re-samples, changing test results, and querying in-process samples in Adobe FLEX Analyze applicable Quality reports and put to use while practicing daily activities Solve basic Quality troubleshooting issues
- 1.
Which system is part of the SSI landscape?
- A.
Wonderware (MES)
- B.
SAP
- C.
FLEX
- D.
Dr. E
- E.
All of the above
Correct Answer
E. All of the aboveExplanation
All of the mentioned systems, Wonderware (MES), SAP, FLEX, and Dr. E, are part of the SSI landscape. This means that all these systems are included in the SSI ecosystem and play a role in the overall SSI infrastructure.Rate this question:
-
- 2.
When finished goods come off the production line, into which stock status is product received?
- A.
Unrestricted stock
- B.
Food safety hold stock
- C.
QI stock
- D.
Available stock
- E.
QA stock
Correct Answer
C. QI stockExplanation
When finished goods come off the production line, they are typically received into QI (Quality Inspection) stock. QI stock is a specific stock status where products are held temporarily for quality inspection before they can be released for sale or distribution. This allows for thorough quality checks and ensures that only products meeting the required standards are made available to customers.Rate this question:
-
- 3.
Sample results recorded in MES are considered either internal or external tests. Which statement is True?
- A.
Internal and External test results are recorded in MES and are sent to back to SAP
- B.
Internal test results are recorded in MES and stay in MES; External test results are recorded in MES, but are sent back to SAP
- C.
All test results are recorded in SAP and remain in SAP
- D.
External test results are recorded in MES and stay in MES; Internal test results are recorded in MES, but sent back to SAP
- E.
Test results are only recorded in Adobe FLEX, then saved to SAP
Correct Answer
B. Internal test results are recorded in MES and stay in MES; External test results are recorded in MES, but are sent back to SAPExplanation
Internal test results are recorded in MES and stay in MES, while external test results are recorded in MES and are sent back to SAP. This means that internal test results are stored and remain within the MES system, while external test results are transferred back to the SAP system for further processing or analysis.Rate this question:
-
- 4.
You receive a sample that has no sample ID attached. It does have the production date and batch number written on it. What do you do?
- A.
Return the sample to the Operator and ask them to print the proper label
- B.
Use Adobe FLEX to search for the sample ID by the batch number
- C.
Run the Missing Sample ID report and identify samples missing for the production line
- D.
Tomorrow, search Adobe FLEX for samples with no test data entered, then print the sample ID label and resume testing
Correct Answer
B. Use Adobe FLEX to search for the sample ID by the batch numberExplanation
The answer suggests using Adobe FLEX to search for the sample ID by the batch number. This implies that Adobe FLEX is a software or tool that can be used to search for specific information based on certain criteria, in this case, searching for the sample ID using the batch number. By using Adobe FLEX, it is possible to retrieve the sample ID and attach it to the sample, thus resolving the issue of the missing sample ID.Rate this question:
-
- 5.
What is the process if a specific test result is out-of-spec twice?
- A.
If the results are within .01-.03 of the spec, the product can still be manually released
- B.
Notify your supervisor for further action
- C.
Ask the Operator to find the material sampled and collect another sample
- D.
Initiate a resample in Adobe FLEX, have another sample gathered, and then run the appropriate test(s) on that sample
- E.
Follow the re-sample process as outline in the customer specs
Correct Answer
D. Initiate a resample in Adobe FLEX, have another sample gathered, and then run the appropriate test(s) on that sampleExplanation
If a specific test result is out-of-spec twice, the correct process is to initiate a resample in Adobe FLEX. This involves gathering another sample and running the appropriate test(s) on that sample. This ensures that the test result is accurate and helps determine if the product meets the required specifications.Rate this question:
-
- 6.
How are Quality Alerts generated in R2P2?
- A.
Manually generated
- B.
System generated
- C.
Both A & B
- D.
None of the above
Correct Answer
C. Both A & BExplanation
Quality Alerts in R2P2 can be generated both manually and by the system. Manual generation allows users to identify and report issues or concerns that may impact the quality of the product or process. On the other hand, system-generated alerts are triggered automatically based on predefined criteria or thresholds, such as deviations from quality standards or abnormal data patterns. Therefore, the correct answer is that Quality Alerts in R2P2 can be generated both manually and by the system.Rate this question:
-
- 7.
Select the correct statement about MES.
- A.
MES is only used on the production floor and not in the Quality lab
- B.
All test results entered in MES are directly sent/interfaced back to Adobe FLEX for reference
- C.
In MES, select the correct production order before launching the DED when gathering a sample or entering test results
- D.
None of the above
Correct Answer
C. In MES, select the correct production order before launching the DED when gathering a sample or entering test resultsExplanation
The correct statement about MES is that in MES, it is necessary to select the correct production order before launching the DED when gathering a sample or entering test results. This indicates that the production order must be accurately identified and chosen before performing any sampling or recording test results in MES.Rate this question:
-
- 8.
The Quality Department uses a variety of systems to manage samples and test results, pull reports, and review Quality Alerts. Which answer below is NOT a correct statement?
- A.
Use SAP to access a variety of Quality reports
- B.
Use Dr. E to send test results back to MES
- C.
Use MES to enter test results
- D.
Use FLEX to enter test results and manage samples
- E.
Use WIS to pull reports from MES
Correct Answer
B. Use Dr. E to send test results back to MES -
- 9.
Which statement is true when updating the test results on a sample after it has been submitted in Flex?
- A.
For each test, Flex allows for one retest result to be entered
- B.
For each test, Flex allows for as many retests to be entered as needed
Correct Answer
A. For each test, Flex allows for one retest result to be enteredExplanation
Flex allows for one retest result to be entered for each test. This means that if a sample has already been submitted, only one additional retest result can be entered for that particular test. Multiple retests cannot be entered for the same test in Flex.Rate this question:
-
- 10.
What information displays with each sample in Adobe FLEX? Select all the correct answer.
- A.
Production date
- B.
Material number
- C.
Production line
- D.
All of the above
- E.
Name of operator who collected sample
- F.
Sample times using a 12-hour clock
Correct Answer
D. All of the aboveExplanation
The information that displays with each sample in Adobe FLEX includes the production date, material number, production line, name of the operator who collected the sample, and the sample times using a 12-hour clock.Rate this question:
-
Quiz Review Timeline +
Our quizzes are rigorously reviewed, monitored and continuously updated by our expert board to maintain accuracy, relevance, and timeliness.
-
Current Version
-
Jun 21, 2023Quiz Edited by
ProProfs Editorial Team -
Sep 30, 2015Quiz Created by
Holly Piturro
- Academic Quizzes
- Adult Learning Quizzes
- Blended Learning Quizzes
- Career Quizzes
- Coaching Quizzes
- College Quizzes
- Communication Quizzes
- Curriculum Quizzes
- Distance Learning Quizzes
- E Learning Quizzes
- Early Childhood Education Quizzes
- GCSE Quizzes
- Grade Quizzes
- Graduation Quizzes
- Kindergarten Quizzes
- Knowledge Quizzes
- Literacy Quizzes
- Online Assessment Quizzes
- Online Exam Quizzes
- Online Test Quizzes
- Physical Education Quizzes
- Qualification Quizzes
- Religious Education Quizzes
- School Quizzes
- Special Education Quizzes
- Study Quizzes
- Subject Quizzes
- Teaching Quizzes
- Theory Quizzes
- Thesis Quizzes
- University Quizzes
Back to top