FSAE Rulebook Mock Quiz

Reviewed by Editorial Team

The ProProfs editorial team is comprised of experienced subject matter experts. They've collectively created over 10,000 quizzes and lessons, serving over 100 million users. Our team includes in-house content moderators and subject matter experts, as well as a global network of rigorously trained contributors. All adhere to our comprehensive editorial guidelines, ensuring the delivery of high-quality content.

Learn about Our Editorial Process

| By Gauravmilinda

Gauravmilinda

Community Contributor

Quizzes Created: 1 | Total Attempts: 300

| Attempts: 300

Quiz Flashcard

Questions

Feedback

During the Quiz End of Quiz

Difficulty

Easy First Hard First Sequential

Share on Facebook Share on Twitter Share on Whatsapp Share on Pinterest Share on Email Copy to Clipboard Embed on your website

1/10 Questions

The car must be equipped with a .............. brake light. with a .......... background and a rectangular, triangular or near round shape with a minimum shining surface of at least 15cm². And when LED lights are used without a diffuser, they may not be more than ......... mm apart.
- Yellow, black, 25
- Red, black, 20
- Red, yellow, 30
- Yellow, red, 30

About This Quiz

This FSAE rulebook mock quiz tests knowledge on specific technical standards such as side impact structures, impact attenuators, and vehicle safety features.

2.

Maintenance plugs must include a positive locking feature which prevents the plug from unintentionally .............
- Becoming loose
- Conducting very high current
- Conducting very low current
- Becoming hot
Correct Answer

A. Becoming loose

Explanation

Maintenance plugs must include a positive locking feature to prevent them from unintentionally becoming loose. This is important because if a plug becomes loose, it can result in a loss of connection and potential electrical hazards. The positive locking feature ensures that the plug remains securely in place, providing a reliable and safe connection.

Rate this question:
3.

If any vehicle on track is observed to have large, uncontrolled movements of aerodynamic devices, then officials will have the right to .............. Flag the car for inspection and the car may be excluded from that run and until any issue identified is rectified.
- White
- Checked
- Black
- Yellow
Correct Answer

A. Black

Explanation

If any vehicle on track is observed to have large, uncontrolled movements of aerodynamic devices, officials will have the right to flag the car for inspection. The car may be excluded from that run and until any issue identified is rectified. The color black is commonly associated with penalties or exclusions in motorsports, so choosing the black flag indicates that the car may be excluded from the run.

Rate this question:

1
4.

If Impact Attenuator Assembly is not integral with the frame minimum of four ...............mm Metric grade .............. bolts must attach the Impact Attenuator Assembly to the Front Bulkhead.
- 8, 8.8
- 10, 5
- 10, 8.8
- 8, 5
Correct Answer

A. 8, 8.8

Explanation

If the Impact Attenuator Assembly is not integral with the frame, it needs to be attached to the Front Bulkhead using a minimum of four bolts. The bolts must have a metric grade of 8 and 8.8.

Rate this question:
5.

Teams that fail to make their presentation during their assigned time period will receive
- Receive -10 points for the event
- Receive -100 points for the event
- Receive -50 points for the event
- Receive zero points for the event.
Correct Answer

A. Receive zero points for the event.

Explanation

Teams that fail to make their presentation during their assigned time period will receive zero points for the event. This means that if a team does not present within their allocated time, they will not be awarded any points for their performance. This penalty serves as a deterrent for teams to ensure that they are punctual and adhere to the designated time frame for their presentation.

Rate this question:
6.

What is the minimum thickness of of tube to be used in case of Alternative Steel Tubing for Side Impact Structure?
- 1.6
- 1.2
- 1.0
- 2.4
Correct Answer

A. 1.2

Explanation

The minimum thickness of the tube to be used in the case of Alternative Steel Tubing for Side Impact Structure is 1.2.

Rate this question:
7.

Which of the following modifications is not specifically permitted without voiding Inspection Approval once vehicle is approved to compete in the dynamic events
- Substitution of the head restraint or seat insert for different drivers
- Replacement of worn chains or sprockets
- Replenishment of fluids
- Adjustment of brake bias
Correct Answer

A. Replacement of worn chains or sprockets

Explanation

The replacement of worn chains or sprockets is not specifically permitted without voiding Inspection Approval once the vehicle is approved to compete in the dynamic events. This means that if the chains or sprockets are worn and need to be replaced, it would require additional approval and could potentially void the inspection approval.

Rate this question:
8.

A .........mm shrouded banana jack must be used for the GLV ground measuring point;
- 4
- 6
- 8
- 10
Correct Answer

A. 4

Explanation

A 4mm shrouded banana jack must be used for the GLV ground measuring point because it is the appropriate size for fitting securely and safely into the measuring point. The shrouded design ensures that the jack is protected and prevents accidental contact with other components.

Rate this question:
9.

If the shutdown circuit is opened by the AMS, the IMD or the BSPD the tractive system must remain disabled until being manually reset by a person directly at the car by ..............
- Any person of the team
- Judges
- Driver
- Safety personnel at event
Correct Answer

A. Any person of the team

Explanation

In the given question, it is stated that if the shutdown circuit is opened by the AMS, the IMD, or the BSPD, the tractive system must remain disabled until being manually reset by a person directly at the car. The correct answer, "any person of the team," implies that any member of the team responsible for the car can reset the tractive system. This means that it does not have to be a specific individual, such as the driver, judges, or safety personnel at the event, but rather any person from the team can perform the reset.

Rate this question:
10.

How many sets of tires and wheels needs to be included in the cost report?
- One for every type of tires the car is going to use (i.e., dry and rain tires)
- Only one, rain ones
- It has not to be included
- Only one, dry ones
Correct Answer

A. Only one, dry ones

Explanation

The cost report only needs to include one set of tires and wheels, specifically the dry ones. This implies that the car will only be using one type of tires, which are the dry tires. Therefore, there is no need to include the cost of rain tires or any additional sets of tires and wheels in the report.

Rate this question:

Quiz Review Timeline (Updated): Nov 29, 2023 +

Our quizzes are rigorously reviewed, monitored and continuously updated by our expert board to maintain accuracy, relevance, and timeliness.

Current Version
Nov 29, 2023

Quiz Edited by
ProProfs Editorial Team
May 17, 2016

Quiz Created by
Gauravmilinda

Fsae Rulebook Mock Quiz

The car must be equipped with a .............. brake light. with a .......... background and a rectangular, triangular or near round shape with a minimum shining surface of at least 15cm². And when LED lights are used without a diffuser, they may not be more than ......... mm apart.

Quiz Preview

Maintenance plugs must include a positive locking feature which prevents the plug from unintentionally .............

If any vehicle on track is observed to have large, uncontrolled movements of aerodynamic devices, then officials will have the right to .............. Flag the car for inspection and the car may be excluded from that run and until any issue identified is rectified.

If Impact Attenuator Assembly is not integral with the frame minimum of four ...............mm Metric grade .............. bolts must attach the Impact Attenuator Assembly to the Front Bulkhead.

Teams that fail to make their presentation during their assigned time period will receive

What is the minimum thickness of of tube to be used in case of Alternative Steel Tubing for Side Impact Structure?

Which of the following modifications is not specifically permitted without voiding Inspection Approval once vehicle is approved to compete in the dynamic events

A .........mm shrouded banana jack must be used for the GLV ground measuring point;

If the shutdown circuit is opened by the AMS, the IMD or the BSPD the tractive system must remain disabled until being manually reset by a person directly at the car by ..............

How many sets of tires and wheels needs to be included in the cost report?