Installing Window Air Conditioners

2.

You should measure the window width and height?

True
False

Correct Answer

A. True

Explanation

Measuring the window width and height is important because it allows you to determine the dimensions of the window. This information is useful for various purposes, such as designing and fitting curtains or blinds, ordering custom-sized window treatments, or ensuring that furniture or other objects will fit properly within the window space. By measuring the window width and height accurately, you can ensure that you make the right decisions and avoid any potential issues or mistakes.

Rate this question:

3.

When do you remove the actual A/C from the case, if required?

On the truck.
At the Warehouse.
After installing it into the window.
Prior to installing it into the window, at the home.

Correct Answer

A. Prior to installing it into the window, at the home.

Explanation

The correct answer is "Prior to installing it into the window, at the home." This means that the actual A/C should be removed from the case before it is installed into the window, and this should be done at the home where it will be installed. Removing the A/C from the case allows for easier installation and ensures that the unit fits properly into the window.

Rate this question:

4.

What do you use to seal any gap?

Caulk
Puddy
Nothing. It’s ok to leave gaps.
Duct Tape

Correct Answer

A. Caulk

Explanation

Caulk is commonly used to seal any gaps. It is a flexible material that can be applied to fill and seal cracks, gaps, and joints in various surfaces such as walls, windows, and doors. Caulk helps to prevent air and water leakage, improves insulation, and enhances the overall appearance of the area. It is a durable and long-lasting solution for sealing gaps, making it the correct answer in this context.

Rate this question:

5.

Using only the approved/correct fasteners is important.

True
False

Correct Answer

A. True

Explanation

Using only the approved/correct fasteners is important because using incorrect or substandard fasteners can compromise the integrity and safety of a structure or equipment. Approved fasteners are specifically designed and tested to meet certain standards and specifications, ensuring they have the necessary strength and durability to hold components together securely. Using incorrect fasteners can lead to loosening, failure, or even catastrophic accidents. Therefore, it is crucial to always use the approved fasteners recommended by manufacturers or engineering specifications to ensure the safety and reliability of the structure or equipment.

Rate this question:

6.

Prior to pulling the flaps to the side of the window, you should ensure the case is “centered”?

True
False

Correct Answer

A. True

Explanation

Before pulling the flaps to the side of the window, it is important to ensure that the case is "centered". This means that the case should be positioned in the middle or balanced before proceeding with pulling the flaps. This is important for maintaining stability and preventing any potential damage or accidents that may occur if the case is not properly centered.

Rate this question:

7.

It is ok to use an extension cord to run electricity to the unit?

True
False

Correct Answer

A. False

Explanation

Using an extension cord to run electricity to a unit is not recommended. Extension cords are designed for temporary use and should not be used as a permanent solution. They can overheat and cause a fire hazard if not used properly. It is always best to have a dedicated electrical outlet installed by a professional to ensure safe and reliable power supply to the unit.

Rate this question:

8.

The edges of the A/C are:

Dull
Sharp
Curved
Flat

Correct Answer

A. Sharp

Explanation

The edges of the A/C are sharp. This means that the edges of the A/C unit have a pointed or keen edge, which could potentially cause injury if not handled carefully.

Rate this question:

9.

Ensuring the A/C has a filter is the home owner's job.

True
False

Correct Answer

A. False

Explanation

The explanation for the answer "False" is that ensuring the A/C has a filter is not solely the homeowner's job. While it is important for homeowners to regularly check and change the filter, it is also the responsibility of HVAC professionals to inspect and maintain the A/C system, including the filter. Additionally, some rental agreements or home maintenance contracts may assign the task of filter maintenance to the landlord or a third-party service provider. Therefore, it is not accurate to say that it is solely the homeowner's job to ensure the A/C has a filter.

Rate this question:

10.

Once you have installed the AC unit in the customer's home, ensure the unit has a half bubble tilt in the back to allow for proper drainage.

True
False

Correct Answer

A. True

Explanation

The statement is suggesting that after installing the AC unit in a customer's home, it is important to ensure that the unit has a slight tilt in the back. This tilt is necessary to allow for proper drainage of any condensation that may accumulate within the unit. Without this tilt, the condensation may not drain properly and could potentially cause damage to the unit or the surrounding area. Therefore, the statement is true.

Rate this question:

11.

What kind of screw should you use to install the A/C into the window?

It depends on the window type.
Wood Screw
Self tapping screw
Dry Wall Screw

Correct Answer

A. It depends on the window type.

Explanation

The type of screw needed to install the A/C into the window depends on the window type. Different windows may require different screws based on their material and design. Using the wrong type of screw could result in an improper installation and potential damage to the window or A/C unit. Therefore, it is important to consider the window type and consult the manufacturer's guidelines or seek professional advice to determine the appropriate screw for installation.

Rate this question:

Installing Window Air Conditioners

If the A/C does not turn on immediately, you should utilize the reset button on the plug.

Quiz Preview

You should measure the window width and height?

When do you remove the actual A/C from the case, if required?

What do you use to seal any gap?

Using only the approved/correct fasteners is important.

Prior to pulling the flaps to the side of the window, you should ensure the case is “centered”?

It is ok to use an extension cord to run electricity to the unit?

The edges of the A/C are:

Ensuring the A/C has a filter is the home owner's job.

Once you have installed the AC unit in the customer's home, ensure the unit has a half bubble tilt in the back to allow for proper drainage.

What kind of screw should you use to install the A/C into the window?