# Tcto 2a553a Vol 1 (001-004) Exam Self Test Questions

Approved & Edited by ProProfs Editorial Team
The editorial team at ProProfs Quizzes consists of a select group of subject experts, trivia writers, and quiz masters who have authored over 10,000 quizzes taken by more than 100 million users. This team includes our in-house seasoned quiz moderators and subject matter experts. Our editorial experts, spread across the world, are rigorously trained using our comprehensive guidelines to ensure that you receive the highest quality quizzes.
D
Community Contributor
Quizzes Created: 1 | Total Attempts: 90
Questions: 27 | Attempts: 90

Settings

• 1.

### Select all that apply - What do the first, second, and third groups of a three-group a/c TO number identify?

• A.

General category,basic mission, and major system

• B.

A/C model, modified mission, production series

• C.

Section of a sectionalized TO, and function of the TO

• D.

The type of TO

A. General category,basic mission, and major system
B. A/C model, modified mission, production series
D. The type of TO
Explanation
The first, second, and third groups of a three-group a/c TO number identify the general category, basic mission, and major system of the aircraft, as well as the A/C model, modified mission, production series, and the type of TO.

Rate this question:

• 2.

### What does group 1, part 2 of a three-group TO number identify?

• A.

Major system or basic mission

• B.

Function of A/C

• C.

Section of a sectionalized TO

• D.

General category

A. Major system or basic mission
Explanation
Group 1, part 2 of a three-group TO number identifies the major system or basic mission. This means that this part of the TO number provides information about the primary system or mission that the document relates to. It helps categorize and organize the TOs based on their main purpose or function.

Rate this question:

• 3.

### What do the letters JG indicate when used within a TO number?

• A.

Just Get it done

• B.

Type of part

• C.

LRU

• D.

Job Guide

• E.

SRU

D. Job Guide
Explanation
The letters JG indicate "Job Guide" when used within a TO number. This suggests that the TO number is associated with a specific job or task guide, providing instructions or guidance on how to complete a particular job.

Rate this question:

• 4.

### What is not identified in the fourth group of a four- group to number?

• A.

A supplemental manual

• B.

The sequence number of specific TO data

• C.

Section of a sectionalized TO

• D.

TO indexes

D. TO indexes
Explanation
In the fourth group of a four-group numbering system, TO indexes are not identified. The other options, such as a supplemental manual, the sequence number of specific TO data, and section of a sectionalized TO, may be identified in the fourth group. However, TO indexes are not specifically mentioned or identified in this group.

Rate this question:

• 5.

### The fifth and sixth groups of TO numbers are used for building upon the previous group to comlete sectionalization of TO data or th supplement it further

• A.

True

• B.

False

A. True
Explanation
The fifth and sixth groups of TO numbers are used to further supplement or complete the sectionalization of TO data. This suggests that these groups of numbers serve a purpose in enhancing or expanding the existing TO data, indicating that the statement is true.

Rate this question:

• 6.

### Select all that apply - What are the four index-type TOs?

• A.

LOAP

• B.

TO Index

• C.

JG

• D.

Category TO

• E.

Alphabetical listing

• F.

Cross-reference tables

A. LOAP
B. TO Index
E. Alphabetical listing
F. Cross-reference tables
Explanation
The four index-type TOs are LOAP, TO Index, Alphabetical listing, and Cross-reference tables. These TOs are used to organize and categorize information in a systematic manner. LOAP stands for List of Associated Publications, which provides a list of related publications. TO Index is an index that helps locate specific topics within a document. Alphabetical listing is an index arranged in alphabetical order, making it easier to find specific terms or topics. Cross-reference tables provide links between different sections or parts of a document, allowing for easy navigation and reference.

Rate this question:

• 7.

### What index TO lists all other authorized to indexes?

• A.

0-1-02

• B.

0-2-01

• C.

0-0-00

• D.

00-00-1

A. 0-1-02
Explanation
The correct answer is 0-1-02. This answer suggests that there is an index, possibly in a database or a system, that lists all other indexes that are authorized to access certain information or perform certain actions. The format of the index is represented as a series of numbers separated by hyphens. The specific numbers in the answer, 0-1-02, indicate a particular order or hierarchy of authorization.

Rate this question:

• 8.

• A.

0-1-1-1

• B.

0-1-1-2

• C.

0-1-1-3

• D.

0-1-11-1

• E.

0-1-33-1

C. 0-1-1-3
• 9.

### What TO index would you use to determine which to number group covers the inertial navigation set on the b-1b bomber?

• A.

0-1-1-1

• B.

0-1-1-3

• C.

0-2-1

• D.

00-2-0

• E.

00-20-1

C. 0-2-1
Explanation
The correct answer is 0-2-1. The TO index is used to determine the technical order or manual that contains information about a specific system or equipment. In this case, the TO index 0-2-1 would contain information about the inertial navigation set on the B-1B bomber.

Rate this question:

• 10.

### What TO index would you sue to find the data code numbers that apply to a particular TCTO?

• A.

0-2-1

• B.

00-2-0

• C.

0-4-2

• D.

0-2-4

• E.

00-4-2

C. 0-4-2
Explanation
To find the data code numbers that apply to a particular TCTO, you would use the TO index 0-4-2.

Rate this question:

• 11.

### What index TO would aid you most in selection TOs to meet the requirements of your unit?

• A.

TO indexes

• B.

Alphabetical listings

• C.

Cross-reference tables

• D.

LOAPs

D. LOAPs
Explanation
LOAPs, or List of Applicable Publications, would aid you most in selecting TOs (Technical Orders) to meet the requirements of your unit. LOAPs provide a comprehensive list of all the applicable publications, including TOs, for a specific unit or system. By referring to the LOAPs, you can easily identify and select the appropriate TOs that are relevant to your unit's requirements. This ensures that you have access to the necessary technical information and instructions needed to meet the specific needs of your unit.

Rate this question:

• 12.

### The purpose of a TOPS is the media through which extensive modifications and nodernization programs are directed

• A.

True

• B.

False

B. False
Explanation
A TCTO is the media through which extensive modifications and nodernization programs are directed

Rate this question:

• 13.

### Select all that apply - What are the three main categories of TCTOs?

• A.

Functional action

• B.

Immediate action

• C.

Specialized action

• D.

Urgent action

• E.

Preliminary action

• F.

Routine action

B. Immediate action
D. Urgent action
F. Routine action
Explanation
The three main categories of TCTOs are immediate action, urgent action, and routine action. Immediate action refers to TCTOs that require immediate attention and must be accomplished as soon as possible to prevent further damage or safety hazards. Urgent action TCTOs are also time-sensitive but may not require immediate attention. Routine action TCTOs are scheduled maintenance or repair tasks that are performed on a regular basis to ensure the proper functioning of equipment or systems. These three categories cover a range of TCTOs based on the urgency and frequency of the required actions.

Rate this question:

• 14.

### The major differance between an immediate action and an urgent action TCTO is urgent action TCTOs are issued to correct conditions that could result in fatal or serious injury to personnel, or extensive damage or destruction to valuable property, and immediate actions TCTOs are issued to correct conditions that may be potentially hazardous to personnel, or couse damage to valuable property or unacceptable reduction in operational or combat effeciency

• A.

True

• B.

False

B. False
Explanation
Immediate action TCTOs are issued to correct conditions that could result in fatal or serious injury to personnel, or extensive damage or destruction to valuable property, and Urgent actions TCTOs are issued to correct conditions that may be potentially hazardous to personnel, or couse damage to valuable property or unacceptable reduction in operational or combat effeciency

Rate this question:

• 15.

### One purpose of a routine action TCTO is to correct equipment or procedural deficiencies that could constitute

• A.

Damage to the a/c

• B.

Death or injury

• C.

Hazard through prolonged usage

• D.

A/C blowing up!!!

C. Hazard through prolonged usage
Explanation
A routine action TCTO (Time Compliance Technical Order) is implemented to address and rectify equipment or procedural deficiencies that may pose a hazard through prolonged usage. By identifying and correcting these deficiencies, the TCTO aims to prevent any potential damage to the aircraft, as well as minimize the risk of death or injury to personnel. The TCTO ensures that necessary corrective actions are taken in a timely manner to maintain the safety and operational efficiency of the aircraft.

Rate this question:

• 16.

### Inspection sequesnce charts show a basically planned work schedule or sequence. In what kind of inspection is this type of abbreviated TO used?

• A.

Operational

• B.

Phase

• C.

Open

• D.

Periodic

D. Periodic
Explanation
Inspection sequence charts are used in periodic inspections. Periodic inspections are scheduled at regular intervals to ensure that equipment or systems are functioning properly and to identify any potential issues or maintenance needs. The abbreviated TO (Technical Order) mentioned in the question refers to a shortened version of the inspection procedure, which is commonly used in periodic inspections to streamline the process and save time. Therefore, the correct answer is "Periodic."

Rate this question:

• 17.

### What level of maintenance accomplishes category 1 routine action TCTOs?

• A.

Organizational and field mx activities

• B.

Depot-level mx activities

• C.

Off base mx activites

• D.

Other station mx activites

A. Organizational and field mx activities
Explanation
Category 1 routine action TCTOs are accomplished at the organizational and field maintenance level. This means that these routine actions are carried out by the maintenance personnel within the organization or field setting. This level of maintenance includes regular maintenance activities that are performed to ensure the proper functioning and upkeep of equipment or systems. It does not involve depot-level, off-base, or other station maintenance activities, which are typically more complex and extensive in nature.

Rate this question:

• 18.

### What level of maintenance accomplishes category 2 routine action TCTOs?

• A.

Organizational and field mx activities

• B.

Off base mx activites

• C.

Depot-level mx activities

• D.

Other station mx activites

C. Depot-level mx activities
Explanation
Depot-level maintenance activities accomplish category 2 routine action TCTOs. This level of maintenance involves more extensive repairs and overhauls of equipment or systems. It is typically performed at specialized facilities or depots where highly skilled technicians and resources are available. Organizational and field maintenance activities are typically responsible for category 1 routine action TCTOs, while off base, other station, or station maintenance activities may refer to different levels or types of maintenance that are not specifically related to category 2 routine action TCTOs.

Rate this question:

• 19.

### What are the time limitations under which category 1 TCTOs are normally accomplished?

• A.

10 to 20 days

• B.

During the next IRAN or overhaul

• C.

30 to 180 days

• D.

20 to 180 days

• E.

20 to 30 days

C. 30 to 180 days
Explanation
Category 1 Time Compliance Technical Orders (TCTOs) are typically completed within a time frame of 30 to 180 days. This means that once a Category 1 TCTO is issued, the necessary actions and modifications should be carried out within this specified period. This allows for a reasonable amount of time to ensure that the required maintenance or repairs are completed efficiently and effectively, without causing undue delays or disruptions to the overall operation of the aircraft or equipment.

Rate this question:

• 20.

### What are the time limitations under which category 2 TCTOs are normally accomplished?

• A.

10 to 20 days

• B.

During the next IRAN or overhaul

• C.

30 to 180 days

• D.

20 to 180 days

• E.

20 to 30 days

B. During the next IRAN or overhaul
Explanation
Category 2 TCTOs (Time Compliance Technical Orders) are typically accomplished during the next IRAN (Inspect and Repair as Necessary) or overhaul of an aircraft. This means that when the aircraft undergoes its next major maintenance event, the necessary repairs or modifications outlined in the TCTO will be completed. This ensures that the work is done within a specific timeframe and in conjunction with other maintenance tasks that may be required during an IRAN or overhaul.

Rate this question:

• 21.

### When the urgency of conditions does not allow time for printion and distributing instructions in formal TO format what TCTO is used?

• A.

Interim

• B.

F.A.S.T.

• C.

Hand writen

A. Interim
Explanation
When the urgency of conditions does not allow time for printing and distributing instructions in formal TO format, an interim TCTO is used. This means that temporary instructions are provided to address the urgent conditions until formal instructions can be produced and distributed.

Rate this question:

• 22.

### As a general rule, what TCTOs are replaced by formal TCTO's within 10 days and are transmitted by radiogram teletype, message form, or any other type of speedy communication?

• A.

Urgent

• B.

F.A.S.T.

• C.

Hand writen

• D.

Routine

• E.

Interim

E. Interim
Explanation
Interim TCTOs are replaced by formal TCTOs within 10 days and are transmitted by radiogram teletype, message form, or any other type of speedy communication. This means that interim TCTOs are temporary measures or instructions that are put in place until a formal TCTO can be issued. They are used when there is an urgent need for action or when there is not enough time to go through the regular process of issuing a formal TCTO. Once the formal TCTO is issued, it replaces the interim TCTO. Therefore, the correct answer is "interim".

Rate this question:

• 23.

### When are record TCTOs issued?

• A.

When a TCTO needs to be complied with imediatly

• B.

When an A/C cannot launch with out it

• C.

When the mod must be done my a contractor or specified af activity

• D.

When the commander feels a TCTO takes priority

C. When the mod must be done my a contractor or specified af activity
Explanation
Record TCTOs are issued when the modification specified in the TCTO needs to be done by a contractor or a specified Air Force activity. This implies that the modification is complex or requires specialized expertise, which is why it cannot be performed by the regular maintenance personnel. Therefore, the issuance of record TCTOs ensures that the necessary modifications are carried out by the appropriate entities to maintain the safety and functionality of the aircraft.

Rate this question:

• 24.

### O and M manuals contain detaled information and instructions required for the operation, maintenance, inspection, overhaul and identifications of parts of A/C, missils, and other related equipment.

• A.

True

• B.

False

A. True
Explanation
O and M manuals are designed to provide detailed information and instructions for the operation, maintenance, inspection, overhaul, and identification of parts of various equipment, including A/C, missiles, and related equipment. These manuals serve as a comprehensive guide for users, ensuring they have the necessary knowledge to effectively operate and maintain the equipment. Therefore, the statement "O and M manuals contain detailed information and instructions required for the operation, maintenance, inspection, overhaul, and identification of parts of A/C, missiles, and other related equipment" is true.

Rate this question:

• 25.

### Select all that applie - Which of these are types of O and M manuals?

• A.

Aircraft

• B.

Missiles

• C.

C-E

• D.

Special weapons

• E.

Other equipment

• F.

JG

• G.

Work package

• H.

Supplemental

• I.

Cots

A. Aircraft
B. Missiles
C. C-E
D. Special weapons
E. Other equipment
F. JG
G. Work package
H. Supplemental
I. Cots
Explanation
The types of O and M manuals include aircraft, missiles, C-E (Command and Control, Communications, and Computers), special weapons, other equipment, JG (Joint Group), work package, supplemental, and Cots (Commercial off-the-shelf).

Rate this question:

• 26.

### How do the manuals referred to as "other equipment publications" differ from the aircraft technical manuals?

• A.

These manuals pertain to parts that my not be on other a/c

• B.

These manuals pertain to equipment other that a/c

• C.

These manuals pertain to equipment that can be taken off the jet

• D.

These manuals pertain to equipment that other than what you are working on

B. These manuals pertain to equipment other that a/c
Explanation
The manuals referred to as "other equipment publications" differ from the aircraft technical manuals because they pertain to equipment other than the aircraft. These manuals may include information about parts that are not present on other aircraft or equipment that can be taken off the jet. They provide guidance and instructions specific to the equipment that is not related to the aircraft itself.

Rate this question:

• 27.

### Who produces commercial manuals relating to a particular item of equipment and how can you obbtain the manual?

• A.

Equipment manufacturers/the to system by your to account manager

• B.

Secretary of af/ the to system by you to account manager

• C.

• D.

A. Equipment manufacturers/the to system by your to account manager
Explanation
Equipment manufacturers produce commercial manuals relating to a particular item of equipment. These manuals can be obtained through the company's system by contacting your account manager.

Rate this question:

Quiz Review Timeline +

Our quizzes are rigorously reviewed, monitored and continuously updated by our expert board to maintain accuracy, relevance, and timeliness.

• Current Version
• Mar 19, 2023
Quiz Edited by
ProProfs Editorial Team
• Oct 03, 2010
Quiz Created by