History & Theory Of Arch.; Principles Of Planning & Arch. Practice Quiz
Helping people!
Reminders:
There are no guarantees that these topics will be asked in the future board examinations.
Questions and Answers
- 1.
Shall not maliciously, or unfairly criticize, or discredit another Architect or the latter's work, relation to whom?
- A.
Relations with Manufacturers, Dealers, and Agents
- B.
Relations with Contractor
- C.
Relations with his/her colleagues and subordinates
- D.
Relations with the client
Correct Answer
C. Relations with his/her colleagues and subordinatesExplanation
The given correct answer is "Relations with his/her colleagues and subordinates." This means that architects should not maliciously or unfairly criticize or discredit their colleagues and subordinates. It is important for architects to maintain a positive and respectful working environment, fostering good relationships with those they work closely with. By promoting healthy relationships with colleagues and subordinates, architects can create a collaborative and supportive atmosphere, which can ultimately lead to better outcomes in their work.Rate this question:
-
- 2.
Who is the architect of 6750 AYALA, Ayala Ave., Makati (between Rustan's and Shangrila Hotel Makati)
- A.
Engracio Mariano
- B.
GF and Partners
- C.
Medi Nasrabadi
- D.
Francisco Mañosa
- E.
Jose Ma. Zaragoza
Correct Answer
B. GF and Partners -
- 3.
Who is the architect of this building:?
- A.
Imhotep
- B.
El – Bahari
- C.
Abu- Simbel
- D.
Knossos
Correct Answer
A. ImhotepExplanation
Imhotep is the correct answer because he is widely recognized as the architect of the building in question. Imhotep was an ancient Egyptian architect, engineer, and physician who lived during the 27th century BCE. He is particularly known for designing the Step Pyramid of Djoser, which is considered to be the earliest colossal stone building and the first pyramid in Egypt. Imhotep's architectural skills and innovative designs made him a highly respected figure in ancient Egypt, and his influence can still be seen in the architectural styles of later Egyptian structures.Rate this question:
-
- 4.
Most ancient stone sculpture in Europe.
- A.
Tholos
- B.
Gate of Lions, Mycenae
- C.
The Palace, Mycenea
- D.
Old Temple of Athena
Correct Answer
B. Gate of Lions, MycenaeExplanation
The Gate of Lions in Mycenae is considered the most ancient stone sculpture in Europe. This is because it dates back to the Bronze Age and is one of the earliest examples of monumental sculpture in Europe. The gate features two large lionesses flanking a column, creating an imposing and symbolic entrance to the city. Its age and significance in European art history make it the correct answer for the most ancient stone sculpture in Europe.Rate this question:
-
- 5.
The desired product is specified by the name given and model number “or an equal approved by the architect”
- A.
Performance Specifications
- B.
Open Specifications
- C.
Reference Specification
- D.
Brand Name Specification
Correct Answer
D. Brand Name SpecificationExplanation
The correct answer is Brand Name Specification because the statement "The desired product is specified by the name given and model number" indicates that a specific brand and model of product is required. The "or an equal approved by the architect" phrase suggests that other brands may be considered as long as they are approved by the architect. This type of specification is commonly used when a certain brand is preferred or when a specific product has been tested and proven to meet the desired requirements.Rate this question:
-
- 6.
There are two types of closed specifications, the single product and the multi product. Closed specifications are usually brand name specifications. The multi product is the same as a single product except that more than one product is used. “no other brand will be accepted”
- A.
Combination Specification
- B.
Open Specifications
- C.
Descriptive Specifications
- D.
Closed Specification
Correct Answer
D. Closed SpecificationExplanation
Closed specifications refer to specifications that specify a particular brand or product and do not allow for any other alternatives. This means that only the specified brand or product will be accepted. In this case, the explanation suggests that there are two types of closed specifications: single product and multi product. The single product specification refers to specifying only one product, while the multi product specification allows for multiple products to be used, as long as they meet the specified brand requirement.Rate this question:
-
- 7.
The item desired is referred to by a number corresponding to a number published in a specification.
- A.
Performance Specifications
- B.
Reference Specification
- C.
Open Specifications
- D.
Closed Specification
Correct Answer
B. Reference SpecificationExplanation
The correct answer is "Reference Specification". In this context, the item desired is identified or referred to by a number that corresponds to a number published in a specification. This suggests that the reference specification provides the necessary information or guidelines for obtaining the desired item. It is likely that the reference specification serves as a standard or a detailed document that outlines the requirements and characteristics of the item.Rate this question:
-
- 8.
Division 8 of Construction index?
- A.
Equipment
- B.
Wood & Plastics
- C.
Doors And Windows
- D.
Conveying System
- E.
Thermal & Moisture Protection
Correct Answer
C. Doors And WindowsExplanation
Division 8 of the Construction index refers to the category of Doors And Windows. This division includes all the information and resources related to doors and windows in the construction industry. It covers topics such as types of doors and windows, installation methods, materials used, and any other relevant information. This division is important for contractors, architects, and anyone involved in the construction process as it provides specific guidelines and standards for doors and windows in building projects.Rate this question:
-
- 9.
Division 13 of Construction index?
- A.
Furnishings
- B.
Finishes
- C.
Special Construction
- D.
Thermal & Moisture Protection
- E.
Mechanical
Correct Answer
C. Special ConstructionExplanation
Division 13 of Construction index refers to "Special Construction". This division includes construction activities that are unique or specialized, such as building systems and components that require special expertise or techniques. It covers areas like pre-engineered structures, swimming pools, theme park structures, and other specialty construction projects.Rate this question:
-
Quiz Review Timeline +
Our quizzes are rigorously reviewed, monitored and continuously updated by our expert board to maintain accuracy, relevance, and timeliness.
-
Current Version
-
Feb 03, 2023Quiz Edited by
ProProfs Editorial Team -
May 24, 2009Quiz Created by
Bgutierrez
What Do You Know About Heating and Insulating Buildings? Quiz
What Do You Know About Heating and Insulating Buildings? Quiz
World Architecture Day Quiz: Test Your Architectural Knowledge!
World Architecture Day Quiz: Test Your Architectural Knowledge!
Random Architectural Design Questions - Architectural Quiz
Random Architectural Design Questions - Architectural Quiz
Back to top