P-28 Rescue Vehicle Quiz

The Lo-Air pressure warning system sounds for both the front and rear air systems when the pressure drops to 60 psi. This indicates that the air pressure in both systems has reached a low level, potentially indicating a problem or malfunction. The warning system is designed to alert the driver or operator to take immediate action and address the issue to prevent any further complications or accidents.

The recommended tire pressure for the P-28 is 120 psi. This means that the manufacturer suggests inflating the tires to a pressure of 120 pounds per square inch. Maintaining the correct tire pressure is important for optimal performance and safety of the vehicle. It helps ensure proper traction, handling, and fuel efficiency.

The P-28 requires SAE 15W-40 engine oil. SAE stands for the Society of Automotive Engineers, and it represents the viscosity rating of the oil. The number 15 indicates the oil's viscosity at low temperatures, while the number 40 represents its viscosity at high temperatures. Therefore, SAE 15W-40 oil is suitable for the P-28 engine, providing optimal lubrication and protection in both cold and hot conditions.

The P-28 requires Dexron IIE transmission fluid.

The correct answer is Pierce Manufacturing Inc. Pierce Manufacturing Inc. is the manufacturer of the P-28.

The rated working load or maximum load of the P-28 winch is 12,000 lbs. This means that the winch is designed and tested to safely handle loads up to 12,000 lbs without any risk of failure or damage. It is important to adhere to this maximum load limit to ensure the winch operates effectively and safely.

The P-28 transmission requires 37 quarts of fluid.

The winch breaking strength of the P-28 is 24,000 lbs. This means that the winch can withstand a maximum force of 24,000 lbs before it breaks. It is important to know the breaking strength of a winch as it determines its maximum load capacity and ensures that it can safely handle heavy loads without any damage or failure.

The Gross Vehicle weight of the P-28 is 36,000 lbs.

The P-28 requires 50 quarts of coolant.

The height of the P-28 is 122 inches.

The capacity of the P-28 is 8,000 lbs.

The GAWR rear refers to the Gross Axle Weight Rating for the rear axle of a vehicle. In this case, the GAWR rear is 20,000 lbs, indicating the maximum weight that the rear axle of the vehicle can safely support without causing damage or compromising its performance.

The width of the P-28 is 96 inches.

The length of the P-28 is 345.74 inches.

The P-28 has an Allison HD-4060P World Trans 4 Speed Automatic transmission.

The P-28 has a Detroit Diesel engine, specifically the 60 Series with a displacement of 12.7 liters. It is equipped with DDEC-III technology and has a horsepower rating of 370.

The P-28 has 385/65 R22.5-18 PLY tires.

The recommended idle time before engine shutdown for the P-28 is 3 to 5 minutes. This allows the engine to cool down gradually and stabilize its internal temperature. It also allows time for the oil to circulate and lubricate the engine components properly. Shutting down the engine immediately after landing or a long flight can lead to thermal shock and potential damage to the engine. Hence, it is important to follow the recommended idle time before shutting down the engine.

The P-28 engine requires 41 quarts of oil.

The GAWR Front refers to the Gross Axle Weight Rating for the front axle of a vehicle. In this case, the GAWR Front is stated as 16,000 lbs, which means that the maximum weight that can be safely supported by the front axle of the vehicle is 16,000 lbs. This rating is important for ensuring that the front axle is not overloaded, which could lead to safety hazards and damage to the vehicle.

The P-28 has a WARN 12,000 Electric winch.

The P-28 generator has a WINCO 20KW PTO driven type.