# Pump, Resection & Synergy

Approved & Edited by ProProfs Editorial Team
At ProProfs Quizzes, our dedicated in-house team of experts takes pride in their work. With a sharp eye for detail, they meticulously review each quiz. This ensures that every quiz, taken by over 100 million users, meets our standards of accuracy, clarity, and engagement.
| Written by Tim Forsyth
T
Tim Forsyth
Community Contributor
Quizzes Created: 4 | Total Attempts: 5,769
Questions: 28 | Attempts: 275

Settings

• 1.

### What are the 3 oscillation modes for the APS II?

• A.

Aggressive, Standard and Efficient

• B.

Low, Medium and High

• C.

Aggressive, Serrated and Blunt

• D.

Aggressive, Blunt and Efficient

A. Aggressive, Standard and Efficient
Explanation
The correct answer is Aggressive, Standard and Efficient. This suggests that the APS II has three different oscillation modes: Aggressive, which implies a strong and forceful movement; Standard, which suggests a regular and common mode; and Efficient, which implies a mode that maximizes effectiveness and productivity. These three modes likely provide users with options to choose the level of oscillation that best suits their needs or preferences.

Rate this question:

• 2.

### What is the Maximum RPM in Forward/Revers mode?

• A.

6000

• B.

8000

• C.

3000

• D.

6200

B. 8000
Explanation
The maximum RPM in Forward/Revers mode is 8000.

Rate this question:

• 3.

### What is the top speed you should run the PowerRasp at?

• A.

5500

• B.

3000

• C.

6200

• D.

8000

C. 6200
Explanation
The top speed that the PowerRasp should be run at is 6200.

Rate this question:

• 4.

### What is the maximum RPM for Oscillation mode?

• A.

2250

• B.

3000

• C.

8000

• D.

6200

B. 3000
Explanation
The maximum RPM for Oscillation mode is 3000. This means that the oscillation mode can rotate at a maximum speed of 3000 revolutions per minute.

Rate this question:

• 5.

### You can use two Shavers Simultaneously with the APS II?

• A.

True

• B.

False

A. True
Explanation
The APS II allows for the use of two shavers simultaneously.

Rate this question:

• 6.

### When you plug in a foot pedal with a hand control shaver hand piece the foot pedal does not work?

• A.

True

• B.

False

B. False
Explanation
The statement is false because when you plug in a foot pedal with a hand control shaver handpiece, the foot pedal should work. The foot pedal is designed to provide control and convenience by allowing the user to operate the shaver hands-free using their foot. Therefore, it should be functional when connected to the hand control shaver handpiece.

Rate this question:

• 7.

### You can control the speed and mode from the Lo Pro foot pedal

• A.

True

• B.

False

A. True
Explanation
The statement is true because the Lo Pro foot pedal allows you to control both the speed and mode. This means that you can adjust the speed at which the pedal operates and also choose between different modes depending on your preference or the specific task at hand. Having this control over the speed and mode gives you the flexibility to customize your experience and optimize the pedal's performance to suit your needs.

Rate this question:

• 8.

### The speed and mode are reset every time you turn the box off?

• A.

True

• B.

False

B. False
Explanation
The speed and mode settings of the box are not reset every time it is turned off. This implies that the box retains its speed and mode settings even after being turned off, indicating that the answer is False.

Rate this question:

• 9.

### What is the Main pump tubing Part #?

• A.

AR-6401

• B.

AR-6421

• C.

AR-6435

• D.

AR-6410

D. AR-6410
Explanation
The main pump tubing part number is AR-6410.

Rate this question:

• 10.

### What Part # contains the outflow cassette and the ReDeuce patient inflow tubing?

• A.

AR-6411

• B.

AR-6435

• C.

AR-6410

• D.

AR-6430

B. AR-6435
Explanation
The correct answer is AR-6435 because it is the part number that contains both the outflow cassette and the ReDeuce patient inflow tubing.

Rate this question:

• 11.

### Arthrex commissioned a study on the sterility of the ReDeuce Tubing

• A.

True

• B.

False

A. True
Explanation
Arthrex commissioned a study on the sterility of the ReDeuce Tubing, indicating that they conducted research or investigation specifically focused on determining the sterility of the mentioned tubing. This suggests that the statement "True" is the correct answer.

Rate this question:

• 12.

### The continuous wave III pump does not use a pressure sensor?

• A.

True

• B.

False

B. False
Explanation
The statement is false because the continuous wave III pump does use a pressure sensor. A pressure sensor is an essential component of the pump as it helps to monitor and regulate the pressure within the system. Without a pressure sensor, the pump would not be able to accurately control the flow rate and maintain the desired pressure levels. Therefore, it is incorrect to say that the continuous wave III pump does not use a pressure sensor.

Rate this question:

• 13.

### The pumps should never be placed at the same height as the patient?

• A.

True

• B.

False

B. False
Explanation
Placing the pumps at the same height as the patient is not a problem. The height of the pumps does not affect their functionality or the patient's safety. The pumps can be positioned at any height that is convenient for the healthcare provider to monitor and adjust the infusion. Therefore, the statement is false.

Rate this question:

• 14.

### The two modes to increase fluid flow on the DW pump are?

• A.

Rinse and Clean

• B.

Spin and Lavage

• C.

Lavage and Clean

• D.

Lavage and Rinse

D. Lavage and Rinse
Explanation
The two modes to increase fluid flow on the DW pump are lavage and rinse. Lavage involves flushing out or irrigating a body cavity or wound with a solution, which helps to remove debris and cleanse the area. Rinse, on the other hand, refers to the act of using water or a liquid to clean or flush a surface. Both lavage and rinse contribute to increasing fluid flow in the DW pump by effectively cleaning and removing contaminants from the system.

Rate this question:

• 15.

### When the DW is setup properly what icon will be highlighted when the shaver is in use?

• A.

Suction

• B.

Lavage

• C.

Shaver

• D.

Rinse

C. Shaver
Explanation
When the DW (Debridement Wand) is set up properly and in use, the icon that will be highlighted is the "Shaver" icon. This indicates that the shaver function of the DW is active and being used for the debridement procedure.

Rate this question:

• 16.

### When the outflow cassette is loaded properly what will occur

• A.

A green check mark will appear

• B.

The Rinse button will be highlighted

• C.

The black roller will engage

• D.

The Shaver button will be highlighted

C. The black roller will engage
Explanation
When the outflow cassette is loaded properly, the black roller will engage. This means that the cassette is securely in place and ready for operation. The engagement of the black roller ensures that the cassette will function correctly and that the fluid or material being processed will flow through the cassette as intended.

Rate this question:

• 17.

### When turning the DW on it is important to ensure that the shaver is off?

• A.

True

• B.

False

B. False
Explanation
It is not necessary to ensure that the shaver is off when turning the DW (presumably referring to dishwasher) on. The shaver and dishwasher are two separate appliances and do not have any direct connection or impact on each other. Therefore, the shaver being on or off does not affect the operation or functionality of the dishwasher.

Rate this question:

• 18.

### It is Ok to turn the pump off in between cases even when using the ReDeuce pump tubing?

• A.

True

• B.

False

A. True
Explanation
The ReDeuce pump tubing is designed to maintain pressure and prevent backflow, even when the pump is turned off. This means that it is safe to turn off the pump in between cases without causing any issues or damage. Therefore, the statement is true.

Rate this question:

• 19.

### It is Ok to spike the bags before the pressure sensor is plugged into the pump

• A.

True

• B.

False

B. False
Explanation
Spiking the bags before the pressure sensor is plugged into the pump is not okay. The pressure sensor is responsible for monitoring the pressure inside the bags, and if the bags are spiked before the sensor is connected, the pressure readings will not be accurate. Therefore, it is important to connect the pressure sensor to the pump before spiking the bags to ensure proper monitoring and control of the pressure.

Rate this question:

• 20.

### The DW pump can’t be used as an inflow only pump?

• A.

True

• B.

False

B. False
Explanation
The statement is false because the DW pump can be used as an inflow only pump. The DW pump is designed to draw water from a source and deliver it to a desired location, making it suitable for use as an inflow only pump.

Rate this question:

• 21.

### The Xenon bulb in Synergy’s light source lasts 500 hours?

• A.

True

• B.

False

B. False
Explanation
The statement is false because the Xenon bulb in Synergy's light source does not last for 500 hours.

Rate this question:

• 22.

### The Autoclave warranty on Synergy camera’s last for:

• A.

5 Years

• B.

1 Year

• C.

7 Years

• D.

2 Years

C. 7 Years
Explanation
The correct answer is 7 Years because the warranty on Synergy camera's lasts for this duration. This means that if there are any defects or malfunctions in the camera within 7 years of purchase, the manufacturer will provide repairs or replacements free of charge. This longer warranty period suggests that the manufacturer has confidence in the durability and quality of their product.

Rate this question:

• 23.

### Synergy is best utilized by Orthopedic Surgeons

• A.

True

• B.

False

B. False
Explanation
The statement suggests that synergy is best utilized by orthopedic surgeons. However, this is not necessarily true. Synergy, which refers to the combined effort of individuals or groups to achieve a greater outcome, can be utilized by professionals in any field, not just orthopedic surgeons. It is a concept that can be applied in various industries and disciplines to enhance collaboration, productivity, and results. Therefore, the given statement is false.

Rate this question:

• 24.

### What is the first thing you should do if the main screen is yellow when the camera is plugged in?

• A.

Cry like a baby

• B.

Curse David Cranney

• C.

• D.

Unplug and Replug the camera

D. Unplug and Replug the camera
Explanation
If the main screen is yellow when the camera is plugged in, the first thing you should do is unplug and replug the camera. This action can help to reset the connection between the camera and the main screen, potentially resolving any issues causing the yellow screen.

Rate this question:

• 25.

### If the printer doesn’t work during a case you can easily print the pictures from the archive?

• A.

True

• B.

False

A. True
Explanation
If the printer doesn't work during a case, it is still possible to print the pictures from the archive. This suggests that there is an archive of pictures that can be accessed and printed even if the printer is not functioning properly. Therefore, the statement is true.

Rate this question:

• 26.

### Where is the on/off button for the light source

• A.

Bottom Left

• B.

Top Left

• C.

Bottom Right

• D.

Top Right

B. Top Left
Explanation
The on/off button for the light source is located in the top left position.

Rate this question:

• 27.

### 4K has over 8 million pixels

• A.

True

• B.

False

A. True
Explanation
4K resolution refers to a display or content that has a horizontal resolution of approximately 4,000 pixels. The "K" in 4K stands for kilo, representing a thousand pixels. Since there are 8 million pixels in 4K resolution, the statement "4K has over 8 million pixels" is true.

Rate this question:

• 28.

• A.

True

• B.

False