Hca Domain Test Dec 2015
(5).webp "Hca Domain Test Dec 2015 - Quiz")
Questions and Answers
- 1.
Upload your response
- 2.
Volume information should not be capured with this measurement identifier
- A.
ML
- B.
L
- C.
CC
- D.
Both B & C
Correct Answer
D. Both B & CExplanation
The measurement identifier "ML" is commonly used to represent milliliters, which is a unit of volume. Therefore, it is incorrect to capture volume information with this measurement identifier. Similarly, "L" and "CC" are also units of volume, so they should not be used to capture volume information. Hence, the correct answer is that both options B ("L") and C ("CC") should not be used to capture volume information.Rate this question:
-
- 3.
Updated Entity Code list is generated by HCA on weekly & Bi-weekly basis
- A.
TRUE
- B.
FALSE
- C.
Option 3
- D.
Option 4
Correct Answer
B. FALSEExplanation
The given statement states that the Updated Entity Code list is generated by HCA on a weekly and bi-weekly basis. However, the correct answer is FALSE. This means that the statement is incorrect and the Updated Entity Code list is not generated by HCA on a weekly and bi-weekly basis.Rate this question:
-
- 4.
For Given Vendor Name Boston Scientific Corporation and Part Number 10734207, what should be the correct information to be populated in field Validated Manufacturer Name
- A.
ANGIODYNAMICS INC
- B.
NAVILYST MEDICAL
- C.
BOSTON SCIENTIFIC COMPANY
- D.
BOSTON SCIENTIFIC CORPORATION
Correct Answer
A. ANGIODYNAMICS INCExplanation
The correct information to be populated in the field Validated Manufacturer Name should be ANGIODYNAMICS INC.Rate this question:
-
- 5.
For the below scenario, select the correct Validation information from the options provided
- A.
Option 1
- B.
Option 2
- C.
Option 3
- D.
Option 4
Correct Answer
C. Option 3 -
- 6.
For the below scenario, select the correct Validation information from the options provided
- A.
Option 1
- B.
Option 2
- C.
Option 3
- D.
Option 4
Correct Answer
A. Option 1 -
- 7.
If our product is only Sterile then Which value should be populated in Validated Packaged As sterile flag?
- A.
Y
- B.
N
- C.
U
- D.
Correct Answer
C. UExplanation
The value "U" should be populated in the Validated Packaged As sterile flag. This indicates that the packaging has not been validated as sterile. Since the product is only sterile, it implies that the packaging may not necessarily be sterile. Therefore, the flag should be set to "U" to reflect the uncertainty regarding the sterility of the packaging.Rate this question:
-
- 8.
If our product is used for Youth then Which value should be populated in Validated Pediatric flag?
- A.
Y
- B.
N
- C.
- D.
U
Correct Answer
A. YExplanation
The value "Y" should be populated in the Validated Pediatric flag if the product is used for youth. This flag indicates that the product has been validated or tested for pediatric use, ensuring its safety and effectiveness for children. By populating "Y" in this flag, it confirms that the product has undergone the necessary validation processes for pediatric usage.Rate this question:
-
- 9.
Arrange Safety Attributes in standard Sequence
- A.
MERCURY-FREE, LATEX-FREE, PVC-FREE, DEHP-FREE, HAZARDOUS INFO, RADIOPAQUE
- B.
LATEX-FREE, PVC-FREE, MERCURY-FREE, DEHP-FREE, HAZARDOUS INFO, RADIOPAQUE
- C.
LATEX-FREE, PVC-FREE, MERCURY-FREE, HAZARDOUS INFO, DEHP-FREE, RADIOPAQUE
- D.
LATEX-FREE, DEHP-FREE, PVC-FREE, MERCURY-FREE, HAZARDOUS INFO, RADIOPAQUE
Correct Answer
D. LATEX-FREE, DEHP-FREE, PVC-FREE, MERCURY-FREE, HAZARDOUS INFO, RADIOPAQUEExplanation
The correct answer is LATEX-FREE, DEHP-FREE, PVC-FREE, MERCURY-FREE, HAZARDOUS INFO, RADIOPAQUE. The safety attributes are arranged in a specific sequence, starting with latex-free, followed by DEHP-free, PVC-free, mercury-free, hazardous info, and finally radiopaque. This sequence is likely based on the level of importance or potential risk associated with each attribute, with latex and DEHP being common allergens and PVC and mercury being potentially harmful substances. Hazardous info and radiopaque are likely placed at the end as they may not be directly related to the safety of the product.Rate this question:
-
- 10.
Where should we capture "MICROPOINT REVERSE CUTTING" attribute for Suture?
- A.
VALIDATED PRIMARY CHARACTERISTIC
- B.
VALIDATED SECONDARY CHARACTERISTIC
- C.
VALIDATED OTHER/MISC. ATTRIBUTES
- D.
VALIDATED ITEM CLARIFIER
Correct Answer
B. VALIDATED SECONDARY CHARACTERISTICExplanation
The "MICROPOINT REVERSE CUTTING" attribute for Suture should be captured under the "VALIDATED SECONDARY CHARACTERISTIC" category. This category is used to capture attributes that are not the primary characteristic of the item but still play an important role in its identification or classification. Since "MICROPOINT REVERSE CUTTING" is a specific attribute related to the type or design of the suture, it falls under the secondary characteristic category.Rate this question:
-
- 11.
How do we capture multiple "Lumen" information in CHARACTERISTICS Column?
- A.
LUMENX2
- B.
2XLUMEN
- C.
DUAL LUMEN
- D.
TWO LUMEN
Correct Answer
A. LUMENX2Explanation
The correct answer is "LUMENX2" because it captures the information of having multiple "Lumen" in the CHARACTERISTICS column. The "X2" indicates that there are two instances of "Lumen" present.Rate this question:
-
- 12.
How do we capture "ANGLE" info in VALIDATED SHAPE?
- A.
45DEGREE ANGLE
- B.
45DDEG ANGLE
- C.
45DEG ANGLED
- D.
45DEGREE ANGLED
Correct Answer
C. 45DEG ANGLEDExplanation
The correct answer is "45DEG ANGLED" because it follows the format of capturing angle information in a validated shape. The angle is represented by "45DEG" and the word "ANGLED" indicates that it is an angled shape.Rate this question:
-
- 13.
Sequence to be followed for "VALIDATED ERGONOMIC LOCATION"
- A.
Position, Location, Direction
- B.
Direction, Location, Position
- C.
Direction ,Position, Location
- D.
Location, Position, Direction
Correct Answer
C. Direction ,Position, LocationExplanation
The correct sequence to be followed for "VALIDATED ERGONOMIC LOCATION" is Direction, Position, Location. This means that the first step is to determine the direction, followed by identifying the position, and finally specifying the location. This sequence ensures that the ergonomic location is accurately identified and validated.Rate this question:
-
- 14.
How do we capture "GRAM" value in VALIDATED VOLUME/WEIGHT?
- A.
GR
- B.
GM
- C.
GRAM
- D.
G
Correct Answer
B. GMExplanation
To capture the "GRAM" value in VALIDATED VOLUME/WEIGHT, we would use the abbreviation "GM" which stands for "gram." This is a commonly used and recognized abbreviation for the unit of measurement "gram."Rate this question:
-
- 15.
How do we capture "Needle Gauge" value in VALIDATED SIZE/DIAMETER?
- A.
18GA
- B.
18GA DIA
- C.
18 GA
- D.
18GAUGE
Correct Answer
A. 18GAExplanation
The correct answer is "18GA" because it is the only option that directly represents the "Needle Gauge" value. The other options include additional information such as "DIA" or "GAUGE" which are not necessary to capture the specific value of the Needle Gauge.Rate this question:
-
- 16.
Select the correct values to be captured for information 100 determinations per Kit from the options provided
- A.
Option 1
- B.
Option 2
- C.
Option 3
- D.
Option 4
Correct Answer
B. Option 2 -
- 17.
"RECYCLABLE" should be captured in which of the following columns
- A.
VALIDATED OTHER/MISC. ATTRIBUTES
- B.
VALIDATED ITEM CLARIFIER/STYLE/SAFETY/REPROCESSED
- C.
VALIDATED REUSABILITY
- D.
VALIDATED SECONDARY CHARACTERISTIC
Correct Answer
A. VALIDATED OTHER/MISC. ATTRIBUTESExplanation
The term "RECYCLABLE" falls under the category of "OTHER/MISC. ATTRIBUTES" because it is a characteristic or quality of the item that is being validated. It does not fit into any of the other categories mentioned in the options.Rate this question:
-
- 18.
Which are the correct values for the given information Five Bottles of 10 OZ per Case
- A.
VALIDATED NET CONTENT UOM - ML, VALIDATED NET CONTENT UOM QUANTITY - 30
- B.
VALIDATED NET CONTENT UOM - OZ, VALIDATED NET CONTENT UOM QUANTITY - 10
- C.
VALIDATED NET CONTENT UOM - 1N, VALIDATED NET CONTENT UOM QUANTITY - 1
- D.
VALIDATED NET CONTENT UOM - 1N, VALIDATED NET CONTENT UOM QUANTITY - 10
Correct Answer
B. VALIDATED NET CONTENT UOM - OZ, VALIDATED NET CONTENT UOM QUANTITY - 10Explanation
The correct answer is VALIDATED NET CONTENT UOM - OZ, VALIDATED NET CONTENT UOM QUANTITY - 10. This is because the information states that there are five bottles of 10 ounces per case, indicating that the unit of measurement for the net content is ounces and the quantity is 10.Rate this question:
-
- 19.
"Pack" should be captured in column "Validated Noun" for product Company Name: Medline Industries and Part Number: MDS137000
- A.
TRUE
- B.
FALSE
- C.
Option 3
- D.
Option 4
Correct Answer
A. TRUEExplanation
The correct answer is "TRUE". The word "Pack" should be captured in the "Validated Noun" column for the product with Company Name: Medline Industries and Part Number: MDS137000.Rate this question:
-
- 20.
Select the correct UNSPSC Code for the product available on URL http://www.sklarcorp.com/orthopedic/intramedullary/kuntscher-nail-guide-pin.html
- A.
42.29.49.19
- B.
42.29.54.05
- C.
42.29.33.01
- D.
42.32.15.07
Correct Answer
B. 42.29.54.05 -
- 21.
What should be the packaging string for Company Name: Professional Hospital Supply Part No: 000072281?
- A.
1BX/100EA
- B.
1CA/24BX/100EA
- C.
1CA/2400EA
- D.
1CS/24BX/100EA
Correct Answer
B. 1CA/24BX/100EAExplanation
The correct packaging string for the given Company Name and Part No should be "1CA/24BX/100EA". This means that the product should be packaged in 1 case (CA), with each case containing 24 boxes (BX), and each box containing 100 units (EA) of the product.Rate this question:
-
- 22.
Provide UNSPSC Classification of the product "Tenderfoot® Heel Incision Lancet" URL : http://www.medline.com/sku/item/MDPITCTF1000IH?skuIndex=S1&question=&flowType=browse&indexCount=
- A.
Infant heel incision instruments
- B.
Lancets
- C.
Phlebotomy trays or accessories
- D.
Blood collection needles
Correct Answer
A. Infant heel incision instrumentsExplanation
The correct answer is "Infant heel incision instruments" because the product "Tenderfoot® Heel Incision Lancet" is specifically designed for making incisions on the heels of infants. This classification accurately describes the purpose and use of the product.Rate this question:
-
- 23.
Populate the correct packaging string for DUKAL CORPORATION, Part Number: HB02
- A.
1CA/24BX/12EA
- B.
1CA/24BX/12BG/1EA
- C.
1CA/24BX/12BG
- D.
None of these
Correct Answer
A. 1CA/24BX/12EAExplanation
The correct packaging string for DUKAL CORPORATION, Part Number: HB02 is "1CA/24BX/12EA". This means that the product is packaged in 1 case, each case contains 24 boxes, and each box contains 12 individual units of the product.Rate this question:
-
- 24.
If the Premier Purchase UOM appears blank after running Packaging Macro for the line item, in which order should these fields be referred in terms of priority to populate the same.
- A.
4,3,1,2
- B.
4,3,2,1
- C.
3,4,1,2
- D.
4,2,3,1
Correct Answer
D. 4,2,3,1Explanation
The correct order of priority to refer to the fields in order to populate the Premier Purchase UOM after running the Packaging Macro for the line item is 4,2,3,1. This means that field 4 should be referred first, followed by field 2, then field 3, and finally field 1.Rate this question:
-
- 25.
Which of the following should be referred as the first priority to select Primary Packaging String when there are Synonymous UOMs?
- A.
Outer UOM
- B.
Premier Vendor UOM
- C.
Customer Vendor UOM
- D.
Any UOM
Correct Answer
C. Customer Vendor UOMExplanation
The customer vendor UOM should be referred to as the first priority when selecting the primary packaging string in a situation where there are synonymous UOMs. This is because the customer vendor UOM represents the unit of measure that is most relevant and important to the customer. By selecting the primary packaging string based on the customer vendor UOM, it ensures that the packaging is aligned with the customer's expectations and requirements.Rate this question:
-
- 26.
When the Brand Name of the material is available, populate only the Brand Name of the material in this column and not the actual material name.
- A.
TRUE
- B.
FALSE
- C.
Option 3
- D.
Option 4
Correct Answer
A. TRUEExplanation
The correct answer is TRUE because the question states that when the brand name of the material is available, only the brand name should be populated in this column and not the actual material name. Therefore, if the given answer is TRUE, it means that the brand name of the material should be populated in the column.Rate this question:
-
Quiz Review Timeline +
Our quizzes are rigorously reviewed, monitored and continuously updated by our expert board to maintain accuracy, relevance, and timeliness.
-
Current Version
-
Apr 20, 2023Quiz Edited by
ProProfs Editorial Team -
Dec 21, 2015Quiz Created by
Jalpadparmar
What Celebrity Do I Look Like Quiz? Discover Your Celebrity Look Alike
What Celebrity Do I Look Like Quiz? Discover Your Celebrity Look Alike
Book Genre Quiz: What Book Genre Is Right For You?
Book Genre Quiz: What Book Genre Is Right For You?
- Binary Code Quizzes
- Computer Concept Quizzes
- Computer Essential Quizzes
- Computer Forensics Quizzes
- Computer Hardware Quizzes
- Computer Networking Quizzes
- Computer Parts Quizzes
- Computer Programming Quizzes
- Computer Science Quizzes
- Computer Security Quizzes
- Computer Shortcut Key Quizzes
- Computer Skills Quizzes
- Computer Virus Quizzes
- Cyber Security Quizzes
- Data Quizzes
- Data Security Quizzes
- Hacking Quizzes
- HCI Quizzes
- Internet Quizzes
- IT SecurITy Quizzes
- Malware Quizzes
- Microprocessor Quizzes
- Network Quizzes
- Operating System Quizzes
- Phishing Quizzes
- Programming Language Quizzes
- Server Quizzes
- Software Quizzes
Back to top