2AX7X 1

1. Which technicians maintain aircraft bleed air, vacuum, pneumatic, fire suppression, and oxygen systems, including removing and replacing associated system components?

Electro-environmental specialists.

Propulsion specialists.

Avionics specialists.

Crew chiefs.

2. Which type of maintenance ensures that equipment is ready and available at the time of need?

Off- equiment

On- equipment

Preventive

Corrective

3. What are the two most common types of primary maintenance metric indicators?

Performance and health.

Trending and impacting.

Positive and negative.

Leading and lagging.

4. Worker safety and health information must be monitored, tracked, and documented using what AF IMT?

55

244

435

623

5. Which of the following is used to highlight trends, benchmarks, or safety conditions relating to maintenance equipment, personnel, training, or processes?

Cross-tells

Self-inspections

Technical orders.

National stock numbers.

6. When Operating Instructions (OI) apply to multiple groups, they should be published as

Wing OIs.

Separate group OIs.

Support agreements.

Air Force instructions.

7. Which maintenance repair priority is designated only for aircraft that are on alert status or aircraft that are supporting the war plan or national emergency missions?

1

2

3

4

8. Which section is tasked with the maintenance, control, and storage of alternate mission equipment, dash–21 equipment, and maintenance, safety, and protective equipment?

Aircraft section.

Support section.

Weapons section.

Armament Support section.

9. In relation to aerospace ground equipment, what are centrally located to enhance mission performance?

AFTO IMT 244s.

Driver radios.

Sub-pools.

Drivers.

10. Which Maintenance Group agency provides technical assistance for Deficiency Reports to work center supervisors?

Plans, Scheduling, and Documentation.

Programs and Resources Flight.

Maintenance Supply Liaison.

QA

11. In addition to being familiar with the unit's assigned weapon system(s), squadron representatives for the Data Integrity Team must be at least

A 5-level.

A 7-level.

A senior Airman.

A non-commissioned officer.

12. Who must ensure the applicable aircraft form sets are provided to the Debrief section by the end of the flying day if debriefs are suspended due to aircraft flying surge operations?

Weapons expediter or Specialist expediter.

Flight-line expediter or Aircraft section chief.

Flight-line expediter or Production Superintendent.

Aircraft section chief or Production Superintendent.

13. Printed copies of the AFTO IMT 95 are not required to accompany end items upon transfer

To/from locations that have access to the necessary maintenance information systems toretrieve the historical information.

In the case of helicopter blades and tail rotor blades being transferred into the disposalsystem.

14. What provides a measurement of unit performance and capability?

Metrics

Reports.

Standards.

Instructions.

15. If a Refurbishment section is established, wings have the option to align it under either the Maintenance Flight or the

Fabrication Flight.

Accessories Flight.

Aircraft Inspection Flight.

Two-level Maintenance Flight.

16. What agency's basic mission is to launch and recover aircraft and to perform the necessary servicing, inspections, and maintenance to perform daily aircraft flying operations?

Transient Alert.

Maintenance Flight.

Aircraft Maintenance Unit.

Maintenance Operations Squadron.

17. Which Integrated Maintenance Database System-Central Database (IMDS-CDB) subsystem provides the capability to track engines and their components for time-changes and inspections and establishes and maintains the installed-on relationship between the engine and components?

C-E Equipment Status.

Job Data Documentation.

Status and Inventory Reporting.

Comprehensive Engine Management System.

18. Section non-commissioned officers-in-charge are responsible for developing crossutilization training requirements, ensuring they do not interfere with

Accountability and control procedures.

Deployments and wing-level taskings.

Qualification and upgrade training.

Scheduled maintenance actions.

19. Who is responsible to the Weapons section chief for monitoring all armament systems maintenance and loading operations?

Load crew chief.

Flight-line expediter.

Weapons expediter.

Dedicated crew chief.

20. Which maintenance capability category is performed at backshop level and consists of off-equipment maintenance?

Two-level maintenance.

Organizational.

Intermediate

Depot.

21. How many standard squadrons are in a maintenance group?

2

3

5

8

22. Which Maintenance Operation Squadron section maintains standardized aircraft jacket files and attends pre-dock and post-dock inspection meetings?

Plans, Scheduling, and Documentation.

Maintenance Management Analysis.

Maintenance Operations Center.

Production Superintendent.

23. Which of the following is not a standard flight in the maintenance squadron?

Fabrication.

Armament.

Propulsion.

Egress.

24. Which Fabrication Flight section's processes are tightly controlled because the parts and tools they manufacture must meet the stringent standards of aerospace-grade equipment?

Low Observable.

Metals Technology.

Non-Destructive Inspection.

Aircraft Structural Maintenance.

25. Which AFTO IMT is used to maintain a permanent history of significant maintenance actions on end-items of equipment?

95

244

427

781 SERIES

26. Which primary maintenance metric indictor shows problems first, as they directly impact maintenance's capability to provide resources to execute the mission?

Leading.

Lagging.

Trending.

Impacting.

27. When a maintenance squadron production superintendent is appointed, who must he or she inform of specialist non-availability to at the beginning of each shift?

Aircraft maintenance unit production superintendents.

Maintenance Operation Center.

Group manning manager.

Squadron commander.

28. What AFTO IMT is used to document accumulated cycles, operating time, and maintenance history, as well as pertinent manufacturing data for jet engine turbine wheels?

781J

245

244

95

29. Section non-commissioned officers-in-charge must ensure their sections are organized with tools, equipment, and material as close to the Point of Maintenance without jeopardizing

Accountability and control procedures.

Qualification and upgrade training

Maintenance and flying schedules.

Proper maintenance techniques.

30. The Aircraft section is split into two separate sections when an Aircraft Maintenance Unit's number of mission assigned aircraft is more than

14

16

18

20

31. Commanders have the option of establishing two separate squadrons, the Equipment Maintenance Squadron and the Component Maintenance Squadron, if maintenance squadron manning authorizations exceed

600.

670.

700.

760.

32. Which section is the wing focal point for engine health tracking and the engine health management program?

Aircraft Maintenance Unit Specialist Section.

Jet Engine Intermediate Maintenance.

Maintenance Operations Center.

Engine Management.

33. Which of the following is not a section within a standard aircraft maintenance unit?

Weapons.

Debrief.

Aircraft

Supply.

34. Which section is normally responsible for aircraft troubleshooting, on-equipment repairs, component removal and installation, reprogramming avionics systems, and classified aircraft items management?

Avionics

Aircrafts

Specialist.

Communication-Navigation

35. Which of the following is used to assign responsibilities, direct actions, and prescribe procedures within a subordinate function (i.e., a staff office, a branch, a squadron, etc.)?

Technical orders.

Support agreements.

Air Force instructions.

Operating instructions.

36. Which Propulsion Flight section stores, builds up, tears down, modifies, and repairs engines, quick engine change kits, and test components?

Jet Engine Intermediate Maintenance.

Engine Equipment Maintenance.

Module/Accessory Repair.

Small Gas Turbine Engine.

37. Who is held legally responsible for their unit's Environmental Protection Agency program compliance in accordance with AFI 32–7042, Waste Management?

Flight commanders.

Squadron commanders.

Maintenance operations officers.

Maintenance group commanders.

38. All requests for depot level assistance must be coordinated through

Plans, Scheduling, and Documentation and the Maintenance Group commander.

Plans, Scheduling, and Documentation and Maintenance Management Analysis.

Quality Assurance and Plans, Scheduling, and Documentation.

Quality Assurance and Maintenance Management Analysis.

39. Which primary maintenance metric indictor shows and follows firmly established trends?

Leading.

Lagging.

Trending.

Impacting.

40. What does the Debrief section use to help identify fault codes to aid maintainers in aircraft troubleshooting?

Landing status codes.

Fault Isolation manuals.

System capability codes.

Fault Reporting manuals.

41. Which Avionics Flight section is responsible for maintaining low-altitude navigation and targeting infrared for night (LANTIRN) pods?

Guidance and Control Systems.

Communication-Navigation

Avionics Intermediate.

Sensors.

42. What do you call wing-level maintenance facilities providing intermediate-level maintenance repair support for multiple Air Force units within a particular theater of operations?

Regional Repair Centers.

Centralized Repair Facilities.

Programmed Depot Maintenance.

Intermediate Repair Enhancement Program.

43. What program promotes identifying and correcting system deficiencies before they affect combat capability?

Quality Assurance.

Reliability and Maintainability.

Programmed Depot Maintenance.

Intermediate Repair Enhancement

44. Which Munitions Flight section receives, stores, warehouses, handles, inspects, ships, inventories, and transports containers, dispensers, and training items?

Production.

Material.

Systems.

Support.

45. Which Integrated Maintenance Database System-Central Database (IMDS-CDB) subsystem replaces the Maintenance Data Collection (MDC) system and provides maintenance personnel with the online capability to document, inquire, and produce retrievals of maintenance actions?

Operational Events.

Maintenance Events.

Job Data Documentation.

Aircraft Automated Forms 781A, J, K.

46. Who is responsible for establishing a crashed, damaged, or disabled aircraft recovery program?

Wing commander.

Wing vice-commander.

Maintenance Group commander.

Maintenance Group deputy commander.

47. Who is responsible for standardizing maintenance discipline, procedures, organizational structures, compliance, and management philosophy?

Maintenance group deputy commander.

Maintenance group commander.

Production superintendent.

Wing commander.

48. Which Maintenance Operations Squadron flight is a centrally located agency responsible for monitoring and developing long-range strategies to sustain fleet health?

Maintenance Operations Center (MOC).

Maintenance Training Flight (MTF).

Maintenance Operations (MOF).

Programs and Resources.

49. The Maintenance Operations Center is responsible for the overall management of which Integrated Maintenance Data System-Central Database (IMDS-CDB) subsystem?

Location.

Operational Events.

Maintenance Events.

Status and Inventory Reporting.

50. Which Avionics Flight section is responsible for performing off-equipment maintenance on systems such as all-weather landing, attitude reference and bombing, and inertial navigation?

Guidance and Control Systems.

Communication-Navigation.

Avionics Intermediate.

Sensors.

51. The Test, Measurement, and Diagnostic Equipment(TMDE) Flight maintains, calibrates, and certifies TMDE through the

Geographically separated units.

Air Force Primary Standards Laboratory.

Rapid Assistance Support for Calibration.

Precision Measurement Equipment Laboratory.

52. Which category of Deficiency Report should you submit if the equipment has a deficiency that if uncorrected, may cause major loss or damage to equipment and no workaround is known?

1A

1B

2A

2B

53. Who is personally responsible for managing the Foreign Object Damage and Dropped Object Prevention programs?

Wing commander.

Wing vice-commander.

Maintenance group commander.

Maintenance group deputy commander.

54. Who guides the overall Data Integrity Team process and ensures the data provided to maintenance managers and supervision is meaningful and factual?

Plans, Scheduling, and Documentation.

Maintenance Management Analysis.

Programs and Resources.

Every user.

55. Who is the office of primary responsibility (OPR) for the Intermediate Repair Enhancement Program?

Wing commander.

Wing vice-commander.

Maintenance group commander.

Maintenance group superintendent.

56. Which Integrated Maintenance Database System-Central Database (IMDS-CDB) subsystem allows users to track maintenance actions and has both maintenance and supply data?

Operational Events.

Maintenance Events.

Job Data Documentation.

Aircraft Automated Forms 781A, J, K.

57. The Maintenance Training Flight normally consists of what two sections?

Education and Training; Development and Instruction.

Training Management; Development and Instruction.

Training Development; Instruction Management.

Training Detachment; Training Management.

58. Which commander is tasked with developing and publishing the wing flying/maintenance schedule in coordination with other squadron maintenance operations officers/maintenance superintendents?

Maintenance squadron.

Maintenance operations flight.

Aircraft maintenance squadron.

Maintenance operations squadron.

59. Who is responsible for chairing the daily maintenance production/scheduling meeting with representatives from throughout the maintenance group (MXG)?

MXG deputy commander.

Wing vice-commander.

MXG superintendent.

MXG commander.

60. Who oversees the management of maintenance facilities and aircraft support equipment procurement and maintenance?

Maintenance Supply Liaison.

Programs and Resources Flight.

Maintenance group superintendent

Maintenance group deputy commander.

2AX7X 1

1. Which technicians maintain aircraft bleed air, vacuum, pneumatic, fire suppression, and oxygen systems, including removing and replacing associated system components?

2.

What first name or nickname would you like us to use?

2. Which type of maintenance ensures that equipment is ready and available at the time of need?

3. What are the two most common types of primary maintenance metric indicators?

4. Worker safety and health information must be monitored, tracked, and documented using what AF IMT?

5. Which of the following is used to highlight trends, benchmarks, or safety conditions relating to maintenance equipment, personnel, training, or processes?

6. When Operating Instructions (OI) apply to multiple groups, they should be published as

7. Which maintenance repair priority is designated only for aircraft that are on alert status or aircraft that are supporting the war plan or national emergency missions?

8. Which section is tasked with the maintenance, control, and storage of alternate mission equipment, dash–21 equipment, and maintenance, safety, and protective equipment?

9. In relation to aerospace ground equipment, what are centrally located to enhance mission performance?

10. Which Maintenance Group agency provides technical assistance for Deficiency Reports to work center supervisors?

11. In addition to being familiar with the unit's assigned weapon system(s), squadron representatives for the Data Integrity Team must be at least

12. Who must ensure the applicable aircraft form sets are provided to the Debrief section by the end of the flying day if debriefs are suspended due to aircraft flying surge operations?

13. Printed copies of the AFTO IMT 95 are not required to accompany end items upon transfer

14. What provides a measurement of unit performance and capability?

15. If a Refurbishment section is established, wings have the option to align it under either the Maintenance Flight or the

16. What agency's basic mission is to launch and recover aircraft and to perform the necessary servicing, inspections, and maintenance to perform daily aircraft flying operations?

17. Which Integrated Maintenance Database System-Central Database (IMDS-CDB) subsystem provides the capability to track engines and their components for time-changes and inspections and establishes and maintains the installed-on relationship between the engine and components?

18. Section non-commissioned officers-in-charge are responsible for developing crossutilization training requirements, ensuring they do not interfere with

19. Who is responsible to the Weapons section chief for monitoring all armament systems maintenance and loading operations?

20. Which maintenance capability category is performed at backshop level and consists of off-equipment maintenance?

21. How many standard squadrons are in a maintenance group?

22. Which Maintenance Operation Squadron section maintains standardized aircraft jacket files and attends pre-dock and post-dock inspection meetings?

23. Which of the following is not a standard flight in the maintenance squadron?

24. Which Fabrication Flight section's processes are tightly controlled because the parts and tools they manufacture must meet the stringent standards of aerospace-grade equipment?

25. Which AFTO IMT is used to maintain a permanent history of significant maintenance actions on end-items of equipment?

26. Which primary maintenance metric indictor shows problems first, as they directly impact maintenance's capability to provide resources to execute the mission?

27. When a maintenance squadron production superintendent is appointed, who must he or she inform of specialist non-availability to at the beginning of each shift?

28. What AFTO IMT is used to document accumulated cycles, operating time, and maintenance history, as well as pertinent manufacturing data for jet engine turbine wheels?

29. Section non-commissioned officers-in-charge must ensure their sections are organized with tools, equipment, and material as close to the Point of Maintenance without jeopardizing

30. The Aircraft section is split into two separate sections when an Aircraft Maintenance Unit's number of mission assigned aircraft is more than

31. Commanders have the option of establishing two separate squadrons, the Equipment Maintenance Squadron and the Component Maintenance Squadron, if maintenance squadron manning authorizations exceed

32. Which section is the wing focal point for engine health tracking and the engine health management program?

33. Which of the following is not a section within a standard aircraft maintenance unit?

34. Which section is normally responsible for aircraft troubleshooting, on-equipment repairs, component removal and installation, reprogramming avionics systems, and classified aircraft items management?

35. Which of the following is used to assign responsibilities, direct actions, and prescribe procedures within a subordinate function (i.e., a staff office, a branch, a squadron, etc.)?

36. Which Propulsion Flight section stores, builds up, tears down, modifies, and repairs engines, quick engine change kits, and test components?

37. Who is held legally responsible for their unit's Environmental Protection Agency program compliance in accordance with AFI 32–7042, Waste Management?

38. All requests for depot level assistance must be coordinated through

39. Which primary maintenance metric indictor shows and follows firmly established trends?

40. What does the Debrief section use to help identify fault codes to aid maintainers in aircraft troubleshooting?

41. Which Avionics Flight section is responsible for maintaining low-altitude navigation and targeting infrared for night (LANTIRN) pods?

42. What do you call wing-level maintenance facilities providing intermediate-level maintenance repair support for multiple Air Force units within a particular theater of operations?

43. What program promotes identifying and correcting system deficiencies before they affect combat capability?

44. Which Munitions Flight section receives, stores, warehouses, handles, inspects, ships, inventories, and transports containers, dispensers, and training items?

45. Which Integrated Maintenance Database System-Central Database (IMDS-CDB) subsystem replaces the Maintenance Data Collection (MDC) system and provides maintenance personnel with the online capability to document, inquire, and produce retrievals of maintenance actions?

46. Who is responsible for establishing a crashed, damaged, or disabled aircraft recovery program?

47. Who is responsible for standardizing maintenance discipline, procedures, organizational structures, compliance, and management philosophy?

48. Which Maintenance Operations Squadron flight is a centrally located agency responsible for monitoring and developing long-range strategies to sustain fleet health?

49. The Maintenance Operations Center is responsible for the overall management of which Integrated Maintenance Data System-Central Database (IMDS-CDB) subsystem?

50. Which Avionics Flight section is responsible for performing off-equipment maintenance on systems such as all-weather landing, attitude reference and bombing, and inertial navigation?

51. The Test, Measurement, and Diagnostic Equipment(TMDE) Flight maintains, calibrates, and certifies TMDE through the

52. Which category of Deficiency Report should you submit if the equipment has a deficiency that if uncorrected, may cause major loss or damage to equipment and no workaround is known?

53. Who is personally responsible for managing the Foreign Object Damage and Dropped Object Prevention programs?

54. Who guides the overall Data Integrity Team process and ensures the data provided to maintenance managers and supervision is meaningful and factual?

55. Who is the office of primary responsibility (OPR) for the Intermediate Repair Enhancement Program?

56. Which Integrated Maintenance Database System-Central Database (IMDS-CDB) subsystem allows users to track maintenance actions and has both maintenance and supply data?

57. The Maintenance Training Flight normally consists of what two sections?

58. Which commander is tasked with developing and publishing the wing flying/maintenance schedule in coordination with other squadron maintenance operations officers/maintenance superintendents?

59. Who is responsible for chairing the daily maintenance production/scheduling meeting with representatives from throughout the maintenance group (MXG)?

60. Who oversees the management of maintenance facilities and aircraft support equipment procurement and maintenance?