Radiographic Film And Screens Quiz

Reviewed by Farah Naz
Farah Naz, MBBS |
Medical Writer
Review Board Member
Farah Naz is a Medical Professional with a Bachelor of Medicine and Bachelor of Surgery (MBBS) from Dow University of Health Sciences. Her academic journey included internships in Radiology, Cardiology, and Neurosurgery. Her contributions to medical research extend to two publications in medical journals, solidifying her position as a promising addition to the field.
Meet Our Review Board Members
, MBBS
By Spirit1flyer
S
Spirit1flyer
Community Contributor
Quizzes Created: 11 | Total Attempts: 42,398
| Attempts: 11,374
SettingsSettings
Please wait...
  • 1/45 Questions

    What do you do to clean the intensifying screen

    • You don't
    • Use soft, lint-free cloth and cleaning solution provided by the manufacturer
    • Windex and a paper towel
    • Sterilize and wash it
Please wait...
About This Quiz

Are you ready for this radiographic film and screens quiz that is here for you? The quiz tests your knowledge of radiographic film, screens, cassettes, and more. The questions are made in a way that will not only be useful to test your knowledge for the self-assessment, but you will learn a lot as you take this quiz.
With See morea focus on real-world application, the quiz covers a wide array of topics, from the basics of film composition and screen types to the intricate details of image quality factors and the role of screens in dose reduction. Whether you're a student aiming to ace your exams, a professional brushing up on your skills, or simply a curious mind eager to explore the radiography terrain, this quiz offers a comprehensive and engaging learning experience.
Prepare to challenge yourself, identify areas for improvement, and celebrate your expertise. Our Radiographic Film and Screens Quiz is not just an assessment—it's an essential step in your ongoing journey of learning and professional development in the fascinating field of radiography.

Radiographic Film And Screens Quiz - Quiz

Quiz Preview

  • 2. 

    A rigid holder that contains the intensifying screen and film

    • Beam restrictors

    • Radiographic cassettes

    • Compressive material

    • Folder

    Correct Answer
    A. Radiographic cassettes
    Explanation
    Radiographic cassettes are a rigid holder that contains the intensifying screen and film. They are used in radiography to hold the film and intensifying screen in place during the exposure to X-rays. The cassette protects the film from exposure to light and helps to ensure accurate and clear images. It is an essential component in radiographic imaging as it allows for the proper positioning and protection of the film and intensifying screen.

    Rate this question:

  • 3. 

    Imaging chaincomputer

    • Conventional radiography

    • Digital radiography

    • Digital track

    • Conventional track

    Correct Answer
    A. Digital radiography
    Explanation
    Digital radiography is the correct answer because it is a type of imaging technique that uses digital sensors to capture and produce images of the internal structures of the body. Unlike conventional radiography, which uses photographic film, digital radiography allows for the immediate acquisition and display of images, making it faster and more efficient. It also offers the advantage of being able to manipulate and enhance the images digitally, allowing for better visualization and analysis.

    Rate this question:

  • 4. 

    Active layer; admits light during stimulation by x-ray. Converts radiation into visible light.

    • Phosphor layer

    • Base

    • Protective layer

    • Reflexive layer

    Correct Answer
    A. Phosphor layer
    Explanation
    The phosphor layer is the correct answer because it is the layer that admits light during stimulation by x-ray and converts radiation into visible light.

    Rate this question:

  • 5. 

    Provides a radiographic picture for diagnosis and evaluation

    • Filter

    • Film

    • Collimator

    • Half-value layer

    Correct Answer
    A. Film
    Explanation
    Film provides a radiographic picture for diagnosis and evaluation. It is a crucial component in radiography as it captures the image formed by the radiation passing through the patient's body. The film is sensitive to the radiation and produces a visible image that can be analyzed by medical professionals to diagnose and evaluate various conditions or abnormalities. It allows for the visualization of internal structures and helps in determining the presence or absence of any pathology. Without film, it would be challenging to obtain a clear and accurate picture for diagnosis and evaluation purposes.

    Rate this question:

  • 6. 

    What is sandwiched between intensifying screens in the x-ray cassette?

    • Film

    • Beam restrictor

    • Compressive material

    • Filter

    Correct Answer
    A. Film
    Explanation
    The correct answer is "film". In the x-ray cassette, the intensifying screens are placed on both sides of the film. These screens help to amplify the x-ray photons and enhance the image quality. The film acts as the medium that captures the x-ray image after it passes through the patient's body. Therefore, the film is sandwiched between the intensifying screens in the x-ray cassette.

    Rate this question:

  • 7. 

    Supports the radiographic film emulsion.

    • Collimator

    • Filter

    • Emulsion

    • Base

    • Half value layer

    Correct Answer
    A. Base
    Explanation
    The base of a radiographic film supports the emulsion, which is the sensitive layer that captures the image. The base provides a stable and durable surface for the emulsion to adhere to, ensuring that it remains intact during the imaging process. Without a solid base, the emulsion could become damaged or detached, resulting in a loss of image quality. Therefore, the base plays a crucial role in supporting the emulsion and maintaining the integrity of the radiographic film.

    Rate this question:

  • 8. 

    What is layered between the intensifying screens?

    • Cassette

    • Filter

    • Film

    • Collimator

    Correct Answer
    A. Film
    Explanation
    The correct answer is film. Film is layered between the intensifying screens in a cassette. The intensifying screens are used to amplify the amount of light that reaches the film, resulting in a clearer and more detailed image. The film captures the image that is formed by the intensifying screens and is later developed to produce the final radiographic image.

    Rate this question:

  • 9. 

    With digital radiography, initially, the output signal is in analog form, but it is converted to digital form

    • True

    • False

    Correct Answer
    A. True
    Explanation
    Digital radiography involves converting analog signals, such as X-rays, into digital form for processing and storage. This conversion allows for easier manipulation, analysis, and sharing of the images. Therefore, the statement that the output signal in digital radiography is initially in analog form but is converted to digital form is true.

    Rate this question:

  • 10. 

    Consists of a homogeneous mixture of gelatin and silver-halide crystals. The silver-halide crystals are the active ingredient

    • Collimator

    • Filter

    • Emulsion

    • Base

    • Half value layer

    Correct Answer
    A. Emulsion
    Explanation
    The correct answer is emulsion. An emulsion is a mixture of gelatin and silver-halide crystals in photography. The gelatin acts as a binder, while the silver-halide crystals are the active ingredient that reacts to light and forms the image. This mixture is spread onto a base, such as a film or paper, to create a light-sensitive material used in photography.

    Rate this question:

  • 11. 

    Material that interacts with x-rays or light photons to transform information

    • Collimator

    • Filter

    • Emulsion

    • Base

    • Half-value layer

    Correct Answer
    A. Emulsion
    Explanation
    An emulsion is a material that interacts with x-rays or light photons to transform information. It is a mixture of two or more immiscible substances, typically a liquid dispersed in another liquid or a solid dispersed in a liquid. In the context of x-rays or light photons, an emulsion is often used in photography or radiography to capture and record images. The emulsion contains light-sensitive particles that react to the photons or x-rays, allowing the formation of an image.

    Rate this question:

  • 12. 

    Imaging chainTV camera

    • Conventional radiography

    • Digital radiography

    • Digital track

    • Conventional track

    Correct Answer
    A. Digital radiography
    Explanation
    Digital radiography is the correct answer because it is a type of imaging technology that uses digital detectors to capture and produce images of the internal structures of the body. This technology has replaced conventional radiography, which uses film and chemical processing, as it offers several advantages such as faster image acquisition, improved image quality, and the ability to manipulate and store images electronically. Digital radiography has revolutionized the field of medical imaging and is widely used in various medical settings for diagnosing and monitoring conditions.

    Rate this question:

  • 13. 

    Imaging chainfile room

    • Conventional radiography

    • Digital radiography

    • Digital track

    • Conventional track

    Correct Answer
    A. Conventional radiography
    Explanation
    Conventional radiography refers to the traditional method of capturing and processing X-ray images using film and chemical processing. This method involves exposing the patient to X-rays, which pass through the body and create an image on the film. The film is then developed in a darkroom using chemicals to produce the final image. In contrast, digital radiography uses electronic sensors to capture X-ray images, which can be viewed and manipulated on a computer. Therefore, the given answer "conventional radiography" is the correct choice as it is the traditional method in the imaging chain.

    Rate this question:

  • 14. 

    How many layers are intensifying screens constructed of?

    • 5

    • 6

    • 3

    • 4

    Correct Answer
    A. 4
    Explanation
    Intensifying screens are constructed of four layers. These layers include a protective coating, a phosphor layer, a reflective layer, and a base layer. The protective coating helps to prevent damage to the screens, while the phosphor layer converts X-ray energy into visible light. The reflective layer reflects the light back towards the film, increasing the efficiency of the screen. Finally, the base layer provides support and stability to the screen.

    Rate this question:

  • 15. 

    Absorb low energy x-rays before reaching the patient

    • Collimator

    • Filter

    • Emulsion

    • Base

    • Half value layer

    Correct Answer
    A. Filter
    Explanation
    made of sheets of aluminum

    Rate this question:

  • 16. 

    Static images produces with either a fan x-ray beam intercepted by a linear array of radiation detectors or an area x-ray beam intercepted by photostimulable phosphor plate or a direct capture solid-state device

    • Digital radiography

    • Conventional radiography

    • Digital track

    • Conventional track

    Correct Answer
    A. Digital radiography
    Explanation
    Digital radiography refers to the use of digital technology to capture and produce X-ray images. This can be done using either a fan X-ray beam intercepted by a linear array of radiation detectors or an area X-ray beam intercepted by a photostimulable phosphor plate or a direct capture solid-state device. In contrast, conventional radiography uses traditional film-based techniques to capture X-ray images. The answer "digital radiography" correctly describes the process of producing static images using digital technology, as mentioned in the given statement.

    Rate this question:

  • 17. 

    To reduce artifacts, cleaning must be done at least ____________.

    • Once annually

    • Once monthly

    • Twice annually

    • Once quarterly

    Correct Answer
    A. Once monthly
    Explanation
    it may be done more often depending on the amount of clinical work

    Rate this question:

  • 18. 

    Where are the intensifying screens attached to?

    • Filter

    • Beam restrictor

    • Front cover of the cassette

    • Back cover of the cassette

    • Front and back cover of the cassette

    Correct Answer
    A. Front and back cover of the cassette
    Explanation
    The intensifying screens are attached to the front and back covers of the cassette. These screens are used in radiographic imaging to enhance the visibility of the X-ray image. By placing the screens on both sides of the cassette, they can effectively interact with the X-ray photons and convert them into visible light, which in turn exposes the film or digital detector to create the image. Attaching the screens to both covers ensures that the X-rays passing through the patient are evenly distributed and captured, resulting in a clearer and more detailed image.

    Rate this question:

  • 19. 

    The image is displayed on a video monitor after computer processing

    • Digital radiography

    • Conventional radiography

    • Digital track

    • Conventional track

    Correct Answer
    A. Digital radiography
    Explanation
    Digital radiography is a modern imaging technique that involves capturing X-ray images using digital sensors instead of traditional X-ray film. The captured images are then processed by a computer and displayed on a video monitor. This allows for immediate viewing and analysis of the images, as well as the ability to enhance or manipulate them for better visualization. Compared to conventional radiography, digital radiography offers several advantages such as faster image acquisition, lower radiation dose, and the ability to store and transmit images electronically.

    Rate this question:

  • 20. 

    Digital radiography differs from conventional radiography because film is not the image receptor

    • True

    • False

    Correct Answer
    A. True
    Explanation
    Digital radiography differs from conventional radiography because it does not use film as the image receptor. Instead, digital radiography uses electronic sensors to capture and store the X-ray image digitally. This allows for immediate image preview, manipulation, and transmission, reducing the need for processing time and physical storage space. Additionally, digital radiography offers the advantage of enhanced image quality and the ability to easily share and analyze images electronically.

    Rate this question:

  • 21. 

    Imaging chainview box

    • Conventional radiography

    • Digital radiography

    • Digital track

    • Conventional track

    Correct Answer
    A. Conventional radiography
    Explanation
    The correct answer is conventional radiography because it is listed first in the sequence of imaging methods. This suggests that it is the initial or traditional method of radiography, which is being compared to other methods such as digital radiography.

    Rate this question:

  • 22. 

    Restricts the useful x-ray beam to the part of the body being imaged, thereby reducing the level of scatter radiation and unnecessary exposure

    • Collimator

    • Filter

    • Emulsion

    • Base

    • Half value layer

    Correct Answer
    A. Collimator
    Explanation
    A collimator is a device that restricts the useful x-ray beam to the part of the body being imaged. By narrowing the beam, it reduces the level of scatter radiation and unnecessary exposure to other areas of the body. This helps to improve image quality and minimize radiation dose to the patient.

    Rate this question:

  • 23. 

    What is located between the screens and covers to maintain close screen/film contact when the cassette is closed?

    • Filter

    • Glass

    • Film

    • Compressive material

    Correct Answer
    A. Compressive material
    Explanation
    compressive material (like felt or rubber)

    Rate this question:

  • 24. 

    Which layer of the radiographic film is sensitive to radiation and light, thus capturing the image?

    • Base

    • Emulsion

    • Protective coating

    • Adhesive layer

    Correct Answer
    A. Emulsion
    Explanation
    The emulsion layer of a radiographic film contains silver halide crystals suspended in gelatin, which are sensitive to both light and radiation. When the film is exposed to light (from an intensifying screen) or direct radiation, the silver halide crystals undergo a chemical change. This change is later developed into a visible image. The emulsion layer is the key component in capturing and recording the radiographic image.

    Rate this question:

  • 25. 

    Farthest from the film; 1 mm thick; acts as a mechanical support for the active layer

    • Phosphor layer

    • Base

    • Protective layer

    • Reflexive layer

    Correct Answer
    A. Base
    Explanation
    The base is the correct answer because it is the layer farthest from the film and acts as a mechanical support for the active layer. It is also typically thicker, with a thickness of 1 mm, compared to the other layers mentioned.

    Rate this question:

  • 26. 

    Purpose is to provide a rigid structure for coating by emulsion

    • Collimator

    • Filter

    • Emulsion

    • Base

    • Half value layer

    Correct Answer
    A. Base
    Explanation
    The base is the correct answer because it provides a rigid structure for coating by emulsion. The emulsion, which contains light-sensitive chemicals, needs a stable and solid surface to adhere to. The base acts as this support, allowing the emulsion to be evenly coated and ensuring the quality of the final product. The other options, such as collimator, filter, and half value layer, do not serve this purpose and are not directly related to providing a rigid structure for coating.

    Rate this question:

  • 27. 

    Imaging chaingrid (film-screen receptor)

    • Conventional radiography

    • Digital radiography

    • Digital track

    • Conventional track

    Correct Answer
    A. Conventional radiography
    Explanation
    Conventional radiography refers to the traditional method of taking X-ray images using film-screen receptors. In this technique, X-rays pass through the body and are captured on a film that is developed using chemicals. This method has been widely used for many years and is still commonly used in many medical facilities. Digital radiography, on the other hand, uses electronic sensors to capture X-ray images, eliminating the need for film and chemicals. The answer suggests that the imaging technique being referred to in the question is conventional radiography.

    Rate this question:

  • 28. 

    The intensifying screen acts as a/an ________ of the remnant radiation reaching the cassette.

    • Shield

    • Amplifier

    • Filter

    • Host

    Correct Answer
    A. Amplifier
    Explanation
    The intensifying screen enhances or amplifies the remnant radiation reaching the cassette. It helps to increase the sensitivity of the cassette to radiation, allowing for better image quality.

    Rate this question:

  • 29. 

    Intercepts light and redirects it to film

    • Phosphor layer

    • Base layer

    • Protective layer

    • Reflexive layer

    Correct Answer
    A. Reflexive layer
    Explanation
    The reflexive layer is responsible for intercepting light and redirecting it to the film. This layer is designed to reflect light back towards the film, enhancing the brightness and clarity of the image. It plays a crucial role in the overall performance of the film, ensuring that the maximum amount of light is utilized to produce a high-quality image.

    Rate this question:

  • 30. 

    The front surface of the cassette (side facing x-ray source) is made with material with a high atomic number.

    • True

    • False

    Correct Answer
    A. False
    Explanation
    low atomic number

    Rate this question:

  • 31. 

    The thickness of a material used to reduce x-ray beam intensity to 1/2 of its original intensity

    • Collimator

    • Filter

    • Emulsion

    • Base

    • Half value layer

    Correct Answer
    A. Half value layer
    Explanation
    The half value layer refers to the thickness of a material that reduces the intensity of an x-ray beam to half of its original intensity. It is a measure of the material's ability to attenuate or absorb x-rays. The half value layer is an important parameter in radiography and radiation protection, as it helps determine the amount of shielding required to reduce radiation exposure to a safe level.

    Rate this question:

  • 32. 

    An imaging modality that uses x-ray film and usually an x-ray tube mounted from the ceiling on a track that allows the tube to be moved in any direction and provides fixed images

    • Digital radiography

    • Conventional radiography

    • Digital track

    • Conventional track

    Correct Answer
    A. Conventional radiography
    Explanation
    Conventional radiography is the correct answer because it refers to the imaging modality that uses x-ray film and an x-ray tube mounted from the ceiling on a track. This setup allows the tube to be moved in any direction and provides fixed images. Digital radiography, on the other hand, uses digital detectors instead of x-ray film, while digital track and conventional track are not commonly used terms in the field of radiography.

    Rate this question:

  • 33. 

    What does the digital radiography imaging chain share with the conventional radiography imaging chain?

    • Processor

    • Operating console

    • Image intensifier

    • X-ray source

    Correct Answer
    A. X-ray source
    Explanation
    The digital radiography imaging chain shares the x-ray source with the conventional radiography imaging chain. This means that both systems use the same source of x-rays to create the images. The x-ray source emits the x-rays which pass through the patient's body and are then captured by a detector to create the radiographic image. This component is essential in both digital and conventional radiography as it provides the necessary radiation to produce the images.

    Rate this question:

  • 34. 

    Imaging chainprocessor

    • Conventional radiography

    • Digital radiography

    • Digital track

    • Conventional track

    Correct Answer
    A. Conventional radiography
    Explanation
    The correct answer is conventional radiography. This can be inferred from the given list of terms, where "conventional radiography" is the only term that is not paired with another term (e.g. "digital radiography" is paired with "digital track"). Therefore, conventional radiography is the odd one out and is the correct answer.

    Rate this question:

  • 35. 

    Uses radiation detectors whose electrical output is proportional to the radiation intensity.

    • Digital radiography

    • Conventional radiography

    • Digital track

    • Conventional track

    Correct Answer
    A. Digital radiography
    Explanation
    Digital radiography uses radiation detectors whose electrical output is proportional to the radiation intensity. This means that the detectors in digital radiography can accurately measure the amount of radiation that is being emitted and convert it into an electrical signal. This electrical signal can then be used to create a digital image of the radiation, allowing for a more precise and detailed image compared to conventional radiography.

    Rate this question:

  • 36. 

    Which of the following is NOT a component of a typical radiographic film?

    • Base 

    • Emulsion 

    • Phosphor layer 

    • Protective coating

    Correct Answer
    A. Phosphor layer 
    Explanation
    A phosphor layer is a component of intensifying screens, not the film itself. Radiographic film typically consists of a base (polyester support), emulsion (silver halide crystals suspended in gelatin), and a protective coating to prevent damage. The phosphor layer in intensifying screens converts X-rays into visible light, which then exposes the film, reducing the radiation dose required for imaging.

    Rate this question:

  • 37. 

    Imaging chainoperating console

    • Conventional radiography

    • Digital radiography

    • Digital track

    • Conventional track

    Correct Answer
    A. Digital radiography
    Explanation
    Digital radiography is the correct answer because it is the only option in the given list that is related to imaging. The other options, such as conventional radiography and conventional track, are also related to radiography but do not specifically mention the use of digital technology. Digital radiography refers to the use of digital sensors to capture and produce X-ray images, offering advantages such as faster image acquisition, lower radiation dose, and the ability to manipulate and enhance images digitally.

    Rate this question:

  • 38. 

    Flexible, but rigid enough for insertion into view box

    • Collimator

    • Filter

    • Emulsion

    • Base

    • Half value layer

    Correct Answer
    A. Base
    Explanation
    The term "flexible, but rigid enough for insertion into view box" suggests that the answer should be something that can be easily inserted into a view box but still maintain some level of rigidity. Out of the given options, the base is the most suitable answer. The base of a film or photographic material provides support and stability, allowing it to be easily inserted into a view box while still maintaining its shape.

    Rate this question:

  • 39. 

    Closest to x-ray film. 10-20 um thick.

    • Phosphor layer

    • Base

    • Protective layer

    • Reflexive layer

    Correct Answer
    A. Protective layer
    Explanation
    The given options are phosphor layer, base, protective layer, and reflexive layer. The question states that the layer is closest to X-ray film and is 10-20 um thick. The protective layer fits this description as it is a layer that is typically placed on top of the X-ray film to protect it from damage.

    Rate this question:

  • 40. 

    Screen film contact should be done ________ This is accomplished by radiographing wire mesh pattern and checking images for blur

    • Once or twice annually

    • Once or twice a month

    • Once quarterly

    • Twice quarterly

    Correct Answer
    A. Once or twice annually
    Explanation
    The screen film contact should be done once or twice annually. This is necessary to ensure the quality of radiographs by checking for any blur in the images. Regularly radiographing the wire mesh pattern helps to identify any issues with the screen film contact and allows for necessary adjustments or maintenance to be carried out.

    Rate this question:

  • 41. 

    Troubleshooting of the cassette includes warped cassette front, sprung or cracked cassette frame, and what else?

    • Loose, bent, or broken hinges

    • Loose, bent, or broken latches

    • Loose, bent, or broken screen

    • All of the above

    • A and B

    Correct Answer
    A. A and B
    Explanation
    The correct answer is A and B. The troubleshooting of the cassette includes checking for loose, bent, or broken hinges and latches. These components are crucial for the proper functioning of the cassette and any issues with them can lead to problems with opening, closing, or securing the cassette. Additionally, problems with the screen are not mentioned in the question, so it is not included in the correct answer.

    Rate this question:

  • 42. 

    How many parts is the radiographic film composed of?

    • 3

    • 4

    • 2

    • 5

    Correct Answer
    A. 4
    Explanation
    The radiographic film comprises four essential parts: the base, emulsion layer(s), adhesive layer, and protective layer. The base provides structural support, while the emulsion layer(s) contain light-sensitive compounds. An adhesive layer binds the emulsion to the base, and a protective layer shields the film from physical damage and environmental factors.

    Rate this question:

  • 43. 

    Imaging chainx-ray source

    • Conventional radiography

    • Digital radiography

    • Digital track

    • Conventional track

    Correct Answer(s)
    A. Conventional radiography
    A. Digital radiography
    Explanation
    The given answer includes two types of radiography techniques: conventional radiography and digital radiography. Conventional radiography refers to the traditional method of capturing X-ray images using film and a chemical developing process. On the other hand, digital radiography involves the use of digital detectors to capture X-ray images, eliminating the need for film and chemical processing. Both techniques are used in the imaging chain of X-ray sources, with conventional radiography being the traditional method and digital radiography being the more advanced and modern approach.

    Rate this question:

  • 44. 

    Image intensifier

    • Conventional radiography

    • Digital radiography

    • Digital track

    • Conventional track

    Correct Answer
    A. Digital radiography
    Explanation
    Digital radiography is the correct answer because it refers to the use of digital technology to capture and process X-ray images. Unlike conventional radiography, which uses film to capture images, digital radiography uses a digital sensor to capture the X-ray image, which is then processed and displayed on a computer. This technology offers several advantages, including faster image acquisition, lower radiation dose, and the ability to manipulate and enhance images for better diagnostic accuracy.

    Rate this question:

  • 45. 

    Nearly transparent to light to avoid unwanted pattern on film

    • Collimator

    • Filter

    • Emulsion

    • Base

    • Half value layer

    Correct Answer
    A. Base
    Explanation
    The base is the correct answer because it is nearly transparent to light. This property is important in order to avoid unwanted patterns on film. The base is the material on which the emulsion, which contains the light-sensitive chemicals, is coated. It acts as a support for the emulsion and provides stability to the film. By being nearly transparent to light, the base allows the light to pass through it without interfering with the image being captured on the film.

    Rate this question:

Farah Naz |MBBS |
Medical Writer
Farah Naz is a Medical Professional with a Bachelor of Medicine and Bachelor of Surgery (MBBS) from Dow University of Health Sciences. Her academic journey included internships in Radiology, Cardiology, and Neurosurgery. Her contributions to medical research extend to two publications in medical journals, solidifying her position as a promising addition to the field.

Quiz Review Timeline (Updated): Jan 10, 2025 +

Our quizzes are rigorously reviewed, monitored and continuously updated by our expert board to maintain accuracy, relevance, and timeliness.

  • Current Version
  • Jan 10, 2025
    Quiz Edited by
    ProProfs Editorial Team

    Expert Reviewed by
    Farah Naz
  • Apr 07, 2010
    Quiz Created by
    Spirit1flyer
Back to Top Back to top
Advertisement