Extra Practice - Wiki Provisioning Quiz
-
When provisioning the "Aastra 6739i", what will the password to log in to the web interface be if the phone is set to factory defaults?
-
8647
-
Adminpass
-
VoipInfo
-
22222
-
This quiz focuses on the provisioning of various network devices, detailing default settings, server configurations, and interface protocols necessary for setup.
Quiz Preview
- 2.
When provisioning a "Cisco 7940" or "7960", the TFTP Server needs to be changed to
-
199.36.250.63
-
Domain.onjive.com/p
-
255.255.254.17
-
199.66.758.44
Correct Answer
A. 199.36.250.63Explanation
When provisioning a "Cisco 7940" or "7960" phone, the TFTP Server needs to be changed to 199.36.250.63. This is because the TFTP (Trivial File Transfer Protocol) server is responsible for providing the necessary configuration files to the Cisco IP phones during the provisioning process. By changing the TFTP server to the specified IP address, the phones will be able to connect to the correct server and retrieve the required configuration files for proper functioning.Rate this question:
-
- 3.
When provisioning a "CyberData Indoor and Outdoor", the Download Protocol needs to be set to___________.
-
HTTP
-
Disabled
-
TFTP
-
Autoprovision
Correct Answer
A. TFTPExplanation
When provisioning a "CyberData Indoor and Outdoor" device, the Download Protocol needs to be set to TFTP. This is because TFTP (Trivial File Transfer Protocol) is commonly used for transferring configuration files and firmware to network devices. TFTP allows for easy and efficient file transfers, making it the appropriate choice for provisioning the CyberData device.Rate this question:
-
- 4.
When provisioning a "Grandstream GXP11450", what are the steps to find the IP address on the phone?
-
Menu>>IP Address
-
Menu>>Status>>Network Status>>Note the IPv4 Address
-
Menu>>Status>>IP Address
-
Menu>>Network>>Status>>IP Address
Correct Answer
A. Menu>>Status>>Network Status>>Note the IPv4 AddressExplanation
The correct answer is "Menu>>Status>>Network Status>>Note the IPv4 Address". This is the correct sequence of steps to find the IP address on the "Grandstream GXP11450" phone. By navigating through the menu and selecting "Status", then "Network Status", the user can find the IPv4 address of the phone.Rate this question:
-
- 5.
When provisioning a "Cisco SPA 504G" through the web interface, what does the transport protocol need to be set to?
-
Https
-
Tftp
-
Tlsc
-
Http
Correct Answer
A. HttpExplanation
When provisioning a "Cisco SPA 504G" through the web interface, the transport protocol needs to be set to HTTP. This is because HTTP (Hypertext Transfer Protocol) is commonly used for web-based communication and is the protocol that allows the device to retrieve the necessary configuration files and settings from the server.Rate this question:
-
- 6.
When provisioning a "Linksys 942" through the Web Interface, what should you change the Profile Rule to?
-
Http://YOURDOMAIN.onjive.com
-
YOURDOMAIN.onjive.com/p
-
Http://YOURDOMAIN.onjive.com/p/$MA
-
YOURDOMAIN/p
Correct Answer
A. Http://YOURDOMAIN.onjive.com/p/$MAExplanation
When provisioning a "Linksys 942" through the Web Interface, the Profile Rule should be changed to "http://YOURDOMAIN.onjive.com/p/$MA". This rule specifies the URL format for the provisioning, where "$MA" is a placeholder for the MAC address of the device. By using this rule, the device will be provisioned using the correct URL format, allowing it to connect to the desired network and function properly.Rate this question:
-
- 7.
When provisioning a "Cisco SPA 112 Analog Adapter", which port does the Ethernet cord need to be plugged in to?
-
Phone 1
-
Ethernet
-
Internet
-
Phone 2
Correct Answer
A. InternetExplanation
When provisioning a "Cisco SPA 112 Analog Adapter", the Ethernet cord needs to be plugged into the "Internet" port. This port is specifically designed for connecting the adapter to the internet network, allowing it to establish a connection and function properly. Plugging the Ethernet cord into any other port, such as Phone 1, Phone 2, or Ethernet, would not provide the required internet connectivity for the adapter.Rate this question:
-
- 8.
When provisioning a "Panasonic KX-UT 123", what does the Master File URL need to be changed to?
-
Http://domain.onjive.com/p/{mac}.cfg
-
Check-sync
-
1440
-
Http://domain.onjive.com/p/master.cfg
Correct Answer
A. Http://domain.onjive.com/p/master.cfgExplanation
The Master File URL needs to be changed to "http://domain.onjive.com/p/master.cfg" when provisioning a "Panasonic KX-UT 123".Rate this question:
-
- 9.
When provisioning a "Panasonic KX-TGP 500", what is Step 4?
-
Select Network Setting
-
Select IP Settings
-
Note the IP address
-
Type the IP Address into the address bar
Correct Answer
A. Select IP SettingsExplanation
Step 4 when provisioning a "Panasonic KX-TGP 500" is to select IP Settings. This step involves choosing the appropriate IP settings for the device, which may include selecting between static or dynamic IP addressing. This is an important step as it determines how the device will connect to the network and obtain its IP address.Rate this question:
-
- 10.
When provisioning a "Polycom 335 through the phone", what is the password if the phone is factory reset?
-
22222
-
8647
-
456
-
0000
Correct Answer
A. 456Explanation
When provisioning a Polycom 335 through the phone, the password that needs to be entered if the phone is factory reset is 456.Rate this question:
-
- 11.
When provisioning a "Polycom VVX 400" through the phone, what is Step 5?
-
Select Network Configuration
-
Select Save
-
Select the Menu button
-
Select Administration Settings
Correct Answer
A. Select Administration SettingsExplanation
Step 5 when provisioning a "Polycom VVX 400" through the phone is to select Administration Settings. This step is important as it allows the user to access and configure various settings related to the administration of the phone. By selecting Administration Settings, the user can make changes to features such as network settings, security settings, and other administrative options.Rate this question:
-
- 12.
When provisioning a "Polycom 5000 Conference phone", what is Step 8?
-
Change the Server Type to HTTP
-
Edit the Server Address
-
Select Admin Settings
-
Select Save
Correct Answer
A. Change the Server Type to HTTPExplanation
Step 8 when provisioning a "Polycom 5000 Conference phone" is to change the Server Type to HTTP. This step involves selecting the appropriate server type for the conference phone to ensure it can connect to the server using the HTTP protocol.Rate this question:
-
- 13.
When provisioning a "Snom 360" what is Step 5?
-
Select Advanced
-
Select Update
-
Select Apply and then select Reboot
-
Select Information
Correct Answer
A. Select AdvancedExplanation
The correct answer is to select "Advanced" when provisioning a "Snom 360". This step is crucial as it allows the user to access advanced settings and configurations for the device. By selecting "Advanced", the user can customize and fine-tune various features and options according to their specific requirements.Rate this question:
-
- 14.
When provisioning a "UniData WPU 7800", what is the password you will need?
-
456
-
8647
-
1234
-
000000
Correct Answer
A. 000000Explanation
The password needed when provisioning a "UniData WPU 7800" is 000000.Rate this question:
-
- 15.
When provisioning a "Vtech VSP 600", the provisioning server needs to be changed to ________________.
-
Http://domain.onjive.com/p
-
Domain.onjive.com
-
Http://domain
-
Http:domain.onjive.com/p/$MA
Correct Answer
A. Http://domain.onjive.com/pExplanation
When provisioning a "Vtech VSP 600", the provisioning server needs to be changed to http://domain.onjive.com/p.Rate this question:
-
- 16.
When provisioning a "Polycom 601" through the phone, what is the password if the phone is already provisioned to Jive?
-
8647
-
1234
-
456
-
00000
Correct Answer
A. 8647 -
- 17.
When provisioning a "Yealink T28P", how can you find the IP address?
-
Press the OK button>>Note the IP address
-
Select Menu>>Network>>IP Settings>>IP Address>>Note the IP address
-
Select Menu>>Status>>Note the IP address
-
Both A and C
Correct Answer
A. Both A and CExplanation
To find the IP address of a "Yealink T28P" phone, you can either press the OK button and note the IP address displayed, or you can select Menu, go to Status, and note the IP address shown. Both options A and C provide a way to find the IP address of the phone.Rate this question:
-
- 18.
When provisioning an "Aastra 6755i", what is Step 6?
-
Reboot the phone
-
Select Save
-
Find the IP address
-
Select Network Settings
Correct Answer
A. Reboot the phoneExplanation
Step 6 when provisioning an "Aastra 6755i" is to reboot the phone. This step is necessary to apply any changes made during the provisioning process and ensure that the phone is properly configured and ready for use. By rebooting the phone, it will restart and activate the new settings, allowing it to connect to the network and function correctly.Rate this question:
-
- 19.
When provisioning a "Polycom 550" through the phone, what is Step 5?
-
Select Save
-
Select Advanced
-
Select Admin Settings
-
Enter password
Correct Answer
A. Select Admin SettingsExplanation
The correct answer is "Select Admin Settings." This step is necessary when provisioning a Polycom 550 through the phone. It indicates that after selecting the Admin Settings option, there are further steps to be followed in order to complete the provisioning process.Rate this question:
-
Quiz Review Timeline (Updated): Mar 20, 2023 +
Our quizzes are rigorously reviewed, monitored and continuously updated by our expert board to maintain accuracy, relevance, and timeliness.
-
Current Version
-
Mar 20, 2023Quiz Edited by
ProProfs Editorial Team -
Feb 25, 2015Quiz Created by
David Rowley
Back to top