Materiel Management Volume 5 Quiz! Exam

1. (804) At a minimum, what Microsoft® Windows operating system is required for flashing a handheld terminal?

95

98

XP

2000

2. (805) Which hand-held terminal function allows the user to place items into the warehouse location?

Pull

Delivery

Put Away

Movement

3. (801) At least how many individual options does Standard Asset Tracking System (SATS) have built-in within the reports list?

10

15

20

25

4. (802) The type of hand-held terminal that uses a Symbol Technologies Hand-Held Fuzzy Logic Scanner is the Intermec Janus

2010

2020

5023

5032

5. (803) What happens during a warm-boot?

Many applications reset to original settings

Configuration settings and files are retained

Many settings revert to the default factory settings

The Standard Asset Tracking System (SATS) application is not retained

6. (803) Which of the following is not correct concerning a cold-boot?

Configuration settings and files are retained

The network and scanner parameters are retained

Some settings revert to the default factory settings

It is necessary to re-flash the Standard Asset Tracking System application onto the hand-heldterminal

7. (804) Software is loaded into hand-held terminals through a process called

Configuring

Transferring

Installing

Flashing

8. (805) What are tracked in Standard Asset Tracking System (SATS) while an item is in route to its warehouse location or delivery destination?

No Warehouse locations

Temporary locations

Permanent locations

Assigned locations

9. (805) What two types of Movements are users allowed to perform on a hand-held terminal?

Individual and bulk

Single and multiple

Temporary and permanent

Assigned and no warehouse location

10. (808) The batch hand-held terminal login sub-process allows users to log into the hand-held terminal when no

Standard Asset Tracking System (SATS) session is available

Communications dock is available

Radio frequency (RF) is available

Workstation is available

11. (806) What process verifies that the user has placed an item in the correct location in the warehouse?

Pull

Delivery

Put Away

Movement

12. (806) What does the Pull process involve?

Delivering property to the customer.

Issuing property from the warehouse

Tracking an interim location for an item

Placing an item in the proper storage location

13. (801) Who is in charge of all the internal workings of the Standard Asset Tracking System (SATS) system?

User

Customer

Network Technician

System Administrator

14. (801) When a customer receives assets from the Logistics Readiness Squadron (LRS), whatever another item besides a Personal Identification Number (PIN) does the individual need to accept property?

Signature

Smart Card

Security Clearance

Standard Asset Tracking System (SATS) Card

15. (812) What system provides the ability to make repair, deployment, sourcing, maintenance, acquisition, re-distribution, forecasting, and other management decisions?

Oracle Discoverer Plus

Enterprise Solution-Supply

Standard Asset Tracking System

Weapon System Management Information System

16. (821) The Supply Interface System residue images are considered delinquent after how many hours?

24

36

48

72

17. (821) After how many days are the Supply Interface System residue images deleted?

5 days

7 days

10 days

14 days

18. (819) Establishing connectivity between a desktop personal computer (PC) and the mainframe computer is done with a terminal emulation program called

Interface Processing Facility

INFOConnect

SATS

OSSG

19. (810) What worksheet item offers pre-defined choices of data when you open a workbook?

Totals

Conditions

Parameters

Percentages

20. (814) In Enterprise Solution-Supply (ES-S), what three sections is the Order Selection Page divided into?

Basic Selection Criteria, Additional Selection Criteria, and Display Criteria

Required Selection Criteria, Optional Selection Criteria, and Display Criteria

Order Selection Criteria, Supplement Selection Criteria, and Display Criteria

Primary Selection Criteria, Secondary Selection Criteria, and Display Criteria

21. (815) The Audit Data Query enhances your ability to query transaction information efficiently for what types of audits?

Management and inventory

Issue and requisition

Internal and external

Single and multiple

22. (820) Which interactive processing facility command changes the name of the workspace?

XQT

NAME

ACCEPT

CHANGE

23. (811) In Discoverer, what function allows you to transfer data to other application formats?

Report

Import

Export

Print

24. (812) The intent of the Enterprise Asset Visibility component is to provide complete visibility of Air Force

Owned assets

Sourced assets

Asset shortages

Repairable assets

25. (820) What type of variable begins with a dollar ($) sign and have preset names?

Set

User

System

Notation

26. (807) The report that provides a snapshot of the effectiveness of meeting customer requirements with on-the-shelf assets is referred to as the Items

Pulled

Not Pulled

Received by Customer

Not Received by Customer

27. (805) All are functions of the Pull process except:

Regular Pull

Pull by Label

Pull by Location

High Priority Pull

28. (809) How many INFOConnect paths does the Standard Asset Tracking System use to communicate with the Materiel Management System?

Zero

One

Two

Three

29. (809) What happens to the hand-held terminal (HHT) and workstation transactions when the Materiel Management System and Standard Asset Tracking System (SATS) are unable to interface?

Both are halted until the SATS and Materiel Management System interface is restored

Both are maintained in the SATS database, in the order they have been generated

The workstation transactions are halted; the HHT transactions are maintained

The workstation transactions are maintained; the HHT transactions are halted

30. (807) How many pre-sorted reports are available to the Standard Asset Tracking System users?

10

17

24

31

31. (801) Who is responsible for issuing all user and customer identification numbers and privileges and for maintaining the database, restoring files, initializing the Radio Frequency (RF) network, and the Materiel Management System Asset Management System interface?

System Administrator

Network technician

Customer

User

32. (810) What is the process of arranging data into meaningful order so that you can analyze it more effectively?

Conditioning

Arranging

Calculating

Sorting

33. (810) In Discoverer, what is a logical grouping of database tables or views that apply to your specific data requirements?

Joins

Sorts

Reports

Business areas

34. (813) One of the primary functions that Enterprise Solution-Supply (ES-S) offers is the ability to

Migrate orders into Weapon System Management Information System (WSMIS)

Input orders into the legacy Materiel Management System

Update orders in the Standard Asset Tracking System (SATS)

Transfer orders into Discoverer

35. (819) Prior to the personal computer, what did INFOConnect gave you access to?

Green screens

Blue screens

Mainframe

Internet

36. (816) Which system provides the user with information on their requisitions, with emphasis placed on the flight line base level user?

TRACKER

RAMPS

LINK

SCS

37. (820) What interactive processing facility command allows you to add images saved in other files to your job stream?

IN

ADD

CALL

ACCEPT

38. (818) What has the capability to support multiple full Materiel Management System accounts?

LSC

DECCs

HQ SSG

OSSG

39. (816) The core of asset management is the

TRACKER

Stock control system

Recoverable Assembly Process

Recoverable Consumption Items Requisitions System – D041

40. (802) How many types of hand-held terminals are used in the Standard Asset Tracking System?

One

Two

Three

Four

41. (808) Maintenance processing is only performed

On the workstation

At the end of the day

By appointed personnel

With the hand-held terminal

42. (806) What function indicates that an item has been transferred from the receiving area to the next step in the storage and delivery process?

Pull

Delivery

Put Away

Reject and Movement

43. (813) In Enterprise Solution-Supply (ES-S), which is not a type of order provided by the Order Placement Page?

Requisition

Common issue

Depot retail issue

Maintenance issue

44. (807) When processing reports in the Standard Asset Tracking System, options that allow you to filter data for your specific requirement are called

Selection types

Parameters

Data lists

Sorts

45. (820) In an interactive processing facility, what are the two editing modes within the full screen mode?

Edit; update

Input; output

Update; output

Input; edit

46. (817) Which module has standalone capability used by unit commanders to determine their war fighting capabilities?

Pipeline Performance Analysis System

Supportability, Analysis, and Visibility

Dyna-Metric Microcomputer Analysis System

Weapon System Management Information System

47. (811) In order to process pre-defined reports and modify the display of results in a worksheet, you would need to use the Discoverer

Reporter

Viewer

Query

Plus

48. (815) What function provides the ability to query all Enterprise Solution-Supply (ES-S) transactions from a single user interface?

Asset query

Audit data query

Process orders query

Process standard base supply system transactions

49. (810) In Discoverer Plus, what filters the data to display only the exact information you want?

Calculations

Percentages

Parameters

Conditions

50. (810) Which worksheet item enables you to summarize rows and columns quickly and easily?

Sorts

Totals

Parameters

Calculations

51. (817) Which module supports repair execution, item distribution, and manages flow of recoverable assets in and out of depot repair?

Readiness Assessment Module

Propulsion Requirement System

Requirements/Execution Availability Logistics Module

Execution and Prioritization of Repair Support System

52. (814) Enterprise Solution-Supply (ES-S) provides the capability to query and view orders in what three legacy systems?

D043; SATS; Materiel Management System

D035A; SATS; Materiel Management System

Materiel Management System; D035A; D035K

D035A; D035K; D043

53. (809) The Standard Asset Tracking System (SATS) and the Materiel Management System interface input session

Provides Materiel Management System-generated SATS transactions to SATS

Processes the output documents sent from Materiel Management System to SATS

Captures the Department of Defense Form 1348–1A and updates SATS with the data

Sends the SATS-generated Materiel Management System transactions to Materiel ManagementSystem

54. (806) Which of these actions does not occur when scanning receipts (REC) through Standard Asset Tracking System (SATS)?

Clears the REC document from SATS

Greatly reduces Document Control workload

Clears the REC document control record from the Materiel Management System

Eliminates the need of sending of a hardcopy receipt document to Document Control

55. (820) Which directory contains commonly used programs, compilers, and other processors?

RECALL

Work

System

Home

56. (816) What on-line system combines the issue, shipment, receipt, and transfer of wholesale and retail material?

Stock control system (SCS)

Logistics Information Network (LINK)

Visual Logistics Information Processing System (VLIPS)

Standard Automated Materiel Management System (SAMMS)

Materiel Management Volume 5 Quiz! Exam

1. (804) At a minimum, what Microsoft® Windows operating system is required for flashing a handheld terminal?

2.

What first name or nickname would you like us to use?

2. (805) Which hand-held terminal function allows the user to place items into the warehouse location?

3. (801) At least how many individual options does Standard Asset Tracking System (SATS) have built-in within the reports list?

4. (802) The type of hand-held terminal that uses a Symbol Technologies Hand-Held Fuzzy Logic Scanner is the Intermec Janus

5. (803) What happens during a warm-boot?

6. (803) Which of the following is not correct concerning a cold-boot?

7. (804) Software is loaded into hand-held terminals through a process called

8. (805) What are tracked in Standard Asset Tracking System (SATS) while an item is in route to its warehouse location or delivery destination?

9. (805) What two types of Movements are users allowed to perform on a hand-held terminal?

10. (808) The batch hand-held terminal login sub-process allows users to log into the hand-held terminal when no

11. (806) What process verifies that the user has placed an item in the correct location in the warehouse?

12. (806) What does the Pull process involve?

13. (801) Who is in charge of all the internal workings of the Standard Asset Tracking System (SATS) system?

14. (801) When a customer receives assets from the Logistics Readiness Squadron (LRS), whatever another item besides a Personal Identification Number (PIN) does the individual need to accept property?

15. (812) What system provides the ability to make repair, deployment, sourcing, maintenance, acquisition, re-distribution, forecasting, and other management decisions?

16. (821) The Supply Interface System residue images are considered delinquent after how many hours?

17. (821) After how many days are the Supply Interface System residue images deleted?

18. (819) Establishing connectivity between a desktop personal computer (PC) and the mainframe computer is done with a terminal emulation program called

19. (810) What worksheet item offers pre-defined choices of data when you open a workbook?

20. (814) In Enterprise Solution-Supply (ES-S), what three sections is the Order Selection Page divided into?

21. (815) The Audit Data Query enhances your ability to query transaction information efficiently for what types of audits?

22. (820) Which interactive processing facility command changes the name of the workspace?

23. (811) In Discoverer, what function allows you to transfer data to other application formats?

24. (812) The intent of the Enterprise Asset Visibility component is to provide complete visibility of Air Force

25. (820) What type of variable begins with a dollar ($) sign and have preset names?

26. (807) The report that provides a snapshot of the effectiveness of meeting customer requirements with on-the-shelf assets is referred to as the Items

27. (805) All are functions of the Pull process except:

28. (809) How many INFOConnect paths does the Standard Asset Tracking System use to communicate with the Materiel Management System?

29. (809) What happens to the hand-held terminal (HHT) and workstation transactions when the Materiel Management System and Standard Asset Tracking System (SATS) are unable to interface?

30. (807) How many pre-sorted reports are available to the Standard Asset Tracking System users?

31. (801) Who is responsible for issuing all user and customer identification numbers and privileges and for maintaining the database, restoring files, initializing the Radio Frequency (RF) network, and the Materiel Management System Asset Management System interface?

32. (810) What is the process of arranging data into meaningful order so that you can analyze it more effectively?

33. (810) In Discoverer, what is a logical grouping of database tables or views that apply to your specific data requirements?

34. (813) One of the primary functions that Enterprise Solution-Supply (ES-S) offers is the ability to

35. (819) Prior to the personal computer, what did INFOConnect gave you access to?

36. (816) Which system provides the user with information on their requisitions, with emphasis placed on the flight line base level user?

37. (820) What interactive processing facility command allows you to add images saved in other files to your job stream?

38. (818) What has the capability to support multiple full Materiel Management System accounts?

39. (816) The core of asset management is the

40. (802) How many types of hand-held terminals are used in the Standard Asset Tracking System?

41. (808) Maintenance processing is only performed

42. (806) What function indicates that an item has been transferred from the receiving area to the next step in the storage and delivery process?

43. (813) In Enterprise Solution-Supply (ES-S), which is not a type of order provided by the Order Placement Page?

44. (807) When processing reports in the Standard Asset Tracking System, options that allow you to filter data for your specific requirement are called

45. (820) In an interactive processing facility, what are the two editing modes within the full screen mode?

46. (817) Which module has standalone capability used by unit commanders to determine their war fighting capabilities?

47. (811) In order to process pre-defined reports and modify the display of results in a worksheet, you would need to use the Discoverer

48. (815) What function provides the ability to query all Enterprise Solution-Supply (ES-S) transactions from a single user interface?

49. (810) In Discoverer Plus, what filters the data to display only the exact information you want?

50. (810) Which worksheet item enables you to summarize rows and columns quickly and easily?

51. (817) Which module supports repair execution, item distribution, and manages flow of recoverable assets in and out of depot repair?

52. (814) Enterprise Solution-Supply (ES-S) provides the capability to query and view orders in what three legacy systems?

53. (809) The Standard Asset Tracking System (SATS) and the Materiel Management System interface input session

54. (806) Which of these actions does not occur when scanning receipts (REC) through Standard Asset Tracking System (SATS)?

55. (820) Which directory contains commonly used programs, compilers, and other processors?

56. (816) What on-line system combines the issue, shipment, receipt, and transfer of wholesale and retail material?