Volume 3 CDC 2s071
-
LWhat management notice is produced when a consoldiated shipment is received
-
I116
-
I136
-
I008
-
I023
-
This Volume 3 CDC 2S071 quiz assesses knowledge in material management within the Air Force, focusing on management notices, transaction codes, receipt variances, and property condition determinations relevant to military logistics.
Quiz Preview
- 2.
Which transaction exception code is NOT USED when attempting to process a material receipt for a bulk issue item during inventory?
-
A
-
D
-
C
-
G
Correct Answer
A. AExplanation
Transaction exception codes are used to indicate specific errors or issues that may occur during the processing of a transaction. In this case, the question is asking for the exception code that is NOT USED when attempting to process a material receipt for a bulk issue item during inventory. Since the question does not provide any information about the exception codes or their meanings, it is not possible to determine which specific exception code is not used in this scenario. Therefore, an explanation cannot be provided.Rate this question:
-
- 3.
Which option is NOT a category of receipt variances
-
Partial receipt
-
Excess receipt
-
Shortage receipt
-
Serviceable Receipt
Correct Answer
A. Serviceable ReceiptExplanation
The option "Serviceable Receipt" is not a category of receipt variances because it refers to a receipt that is in good condition and meets the required specifications. Receipt variances usually refer to discrepancies or differences in the quantity or quality of received items compared to what was expected or ordered. Serviceable Receipt does not indicate any variance or discrepancy, but rather signifies that the received item is in proper working condition.Rate this question:
-
- 4.
For an Overage receipt, what action must be taken on the receipt document?
-
Write the correct quantity on it
-
Write the overage quantity on it
-
Circle the incorrect quantity and put the overage quantity above it
-
Circle the incorrect quantity and put the correct quantity actually recieved above it
Correct Answer
A. Circle the incorrect quantity and put the correct quantity actually recieved above it -
- 5.
Which material management complex individuals are authorized to determin the condition of property for the supply account?
-
Inspectors
-
In-checkers
-
Storagepersonnel
-
Inventory personnel
Correct Answer
A. InspectorsExplanation
Inspectors are authorized to determine the condition of property for the supply account. They are responsible for conducting inspections and assessments to ensure that the property meets the required standards and is in good condition. Inspectors have the expertise and knowledge to identify any damages, defects, or issues with the property and make recommendations for repairs or replacements. Their role is crucial in maintaining the quality and functionality of the property within the supply account.Rate this question:
-
- 6.
The physical state that determines the uselessness of an item to carry out its intended purpose is the
-
Condition
-
ERRCD
-
Identity
-
Status
Correct Answer
A. ConditionExplanation
The physical state of an item refers to its overall condition, which can determine its usefulness or uselessness in carrying out its intended purpose. The condition of an item reflects its state of wear and tear, damage, or functionality. Therefore, the correct answer is "condition."Rate this question:
-
- 7.
Which of the following three things does a materiel management inspector uses to identify an item?
-
Stock #, item description, and specifications
-
Stock #, nomenclature, and item description
-
Stock #, reference number, and part number
-
Stock #, reference number, and item description
Correct Answer
A. Stock #, reference number, and item descriptionExplanation
A material management inspector uses the stock number, reference number, and item description to identify an item. The stock number helps in locating the item within the inventory system, the reference number provides additional information or context about the item, and the item description describes the characteristics or details of the item. By using these three pieces of information together, the inspector can accurately identify the item in question.Rate this question:
-
- 8.
What computer input is made to initiate a condition change?
-
FCC
-
FCH
-
FCI
-
FCU
Correct Answer
A. FCCExplanation
The correct answer is FCC. In computer systems, input is used to initiate a condition change. FCC could represent a specific input command or signal that triggers a condition change in the system. The other options, FCH, FCI, and FCU, do not provide any context or information related to computer input or condition changes.Rate this question:
-
- 9.
Who is notified to determine the shelf life coding for a stored item that appears to be deterioating and is excluded from shelf life control?
-
Inspector and HA AFMC
-
Item manager and HQ AFMC
-
Accountable Officer and HQ USAF
-
Inventory supervisor and HQ USAF
Correct Answer
A. Item manager and HQ AFMCExplanation
The item manager and HQ AFMC are notified to determine the shelf life coding for a stored item that appears to be deteriorating and is excluded from shelf life control. They are responsible for assessing the condition of the item and deciding on the appropriate shelf life coding based on its deterioration. The item manager has the knowledge and expertise regarding the item's characteristics and storage requirements, while HQ AFMC provides guidance and support in determining the shelf life coding. Together, they ensure that the item is properly labeled and controlled to prevent any further deterioration.Rate this question:
-
- 10.
How many days before the expiration date are type II shelf life items scheduled for serviceability testing?
-
10
-
15 to 45
-
60 to 90
-
120
Correct Answer
A. 15 to 45Explanation
Type II shelf life items are scheduled for serviceability testing 15 to 45 days before their expiration date. This range allows enough time to conduct the testing and take necessary actions, such as replacing or repairing the items, before they become expired. Testing too early may result in wastage of resources, while testing too close to the expiration date may not leave enough time for corrective measures. Therefore, the optimal timeframe for serviceability testing of type II shelf life items is between 15 to 45 days before the expiration date.Rate this question:
-
- 11.
What transaction identification code(TRIC) is processed to load or delete the functional check flag indicator(F) on funcyional check assets?
-
FCD
-
FCH
-
FCK
-
FTR
Correct Answer
A. FCDExplanation
The transaction identification code (TRIC) that is processed to load or delete the functional check flag indicator (F) on functional check assets is FCD.Rate this question:
-
- 12.
Which transactioon identification code and activity code is used to process items accounted for on mobilitiy readiness spare package(MRSP), war reserve materiel(WRM),or supply points details to maintenance for a functional check?
-
ISU, C
-
ISU, A
-
MSI, C
-
MSI, A
Correct Answer
A. MSI, CExplanation
The correct answer is MSI, C. The MSI code is used for processing items accounted for on mobility readiness spare package (MRSP), war reserve materiel (WRM), or supply points details to maintenance. The activity code C is used for a functional check.Rate this question:
-
- 13.
Ho forwards two copies of each time compliance technical oroder(TCTO) publication with a cover letter to the materiel management inspector?
-
Supply In-Checker
-
TCTO kit monitor
-
Supply warehouse supervisor
-
Base maintenance Quality control
Correct Answer
A. Base maintenance Quality controlExplanation
Base maintenance Quality control is responsible for forwarding two copies of each time compliance technical order (TCTO) publication with a cover letter to the materiel management inspector. This role ensures that the necessary documentation is provided to the appropriate personnel for inspection and compliance purposes.Rate this question:
-
- 14.
How often are on the shelf time compliance technical order(TCTO) items inspected to ensure TCTO caompliance is being accomplished
-
Weekly
-
Monthly
-
Semiannually
-
Annually
Correct Answer
A. MonthlyExplanation
TCTO items are inspected on a monthly basis to ensure compliance with TCTO requirements. This regular inspection schedule allows for timely identification and correction of any non-compliance issues, maintaining the overall effectiveness and safety of the TCTO program. By conducting monthly inspections, any potential deviations from TCTO procedures can be promptly addressed, minimizing the risk of operational disruptions or safety hazards.Rate this question:
-
- 15.
A TCTO item is identified in the computer by a TCTO flag or by
-
Other assets indicator 5
-
Other assets indicator 4
-
NPPC 5
-
NPPC 4
Correct Answer
A. NPPC 4Explanation
The correct answer is NPPC 4. In the given question, it is stated that a TCTO item is identified in the computer by a TCTO flag or by "other assets indicator 5" or "other assets indicator 4" or "NPPC 5" or "NPPC 4". The correct option is NPPC 4, as it is one of the identifiers used to identify a TCTO item in the computer system.Rate this question:
-
- 16.
What computer input is used ot load a TCTO flag
-
FCC
-
FCD
-
FCI
-
FCU
Correct Answer
A. FCDExplanation
The correct answer is FCD because FCD stands for Fault Code Display, which is a computer input used to load a TCTO flag. This input is responsible for displaying fault codes and indicating any issues or errors in the system.Rate this question:
-
- 17.
Which computer input is used to koas a suspect materiel flag to an item
-
FCC with an F in the 48th pos
-
FCD with an F in 48th pos
-
FCC with an S in 48th pos
-
FCD with an S in 48th pos
Correct Answer
A. FCD with an S in 48th posExplanation
The correct answer is FCD with an S in the 48th position. This suggests that the computer input being used is FCD, and in the 48th position, there is an S. This specific combination is used to flag a suspect material to an item.Rate this question:
-
- 18.
Who maintains inquiry images foritems that are unsuitable for the AF?
-
Stock control
-
Production control
-
Reapair cycle control
-
Materiel management inspector
Correct Answer
A. Materiel management inspectorExplanation
The materiel management inspector is responsible for maintaining inquiry images for items that are unsuitable for the AF. This role involves overseeing the management and inspection of materials and equipment, ensuring they meet the required standards and are suitable for use. They are responsible for conducting inquiries and investigations into any unsuitable items, documenting and maintaining images of these items for reference and future analysis. This helps in identifying any recurring issues or patterns and taking appropriate actions to prevent such items from being used in the future.Rate this question:
-
- 19.
The inspection offline checklist(R32) should be processed at least
-
Weekly
-
Monthly
-
Quarterly
-
Semiannually
Correct Answer
A. MonthlyExplanation
The inspection offline checklist (R32) should be processed monthly to ensure that all necessary inspections are conducted regularly. Processing the checklist on a monthly basis allows for timely identification of any issues or maintenance requirements. This frequency strikes a balance between conducting inspections frequently enough to catch any potential problems and not overwhelming the process with excessive checks. By processing the checklist monthly, any necessary actions can be taken promptly, ensuring the smooth operation of the offline system.Rate this question:
-
- 20.
The document that specifies materiel safety data sheets(MSDS) requirements for govt purchases is
-
AFMAN 23-110
-
AFMAN 23-210
-
FED-STD-313
-
FED_PUB 313
Correct Answer
A. FED-STD-313Explanation
FED-STD-313 is the correct answer because it is a document that specifies the requirements for materiel safety data sheets (MSDS) for government purchases. AFMAN 23-110 and AFMAN 23-210 are not relevant to MSDS requirements, and FED_PUB 313 is not a valid document.Rate this question:
-
- 21.
Which activity must approve all additions or deletions to the Health Hazard Approval Listing(HHAL)?
-
Bioenvironmental ENgineering Services
-
Maintenance contact point
-
Sustomer service
-
Item manager
Correct Answer
A. Bioenvironmental ENgineering ServicesExplanation
Bioenvironmental Engineering Services must approve all additions or deletions to the Health Hazard Approval Listing (HHAL). This is because Bioenvironmental Engineering Services is responsible for assessing and managing potential health hazards in a given environment. They have the expertise and knowledge to evaluate the impact of additions or deletions to the HHAL and ensure that the health and safety of individuals are not compromised.Rate this question:
-
- 22.
How are electrostatic sensitive devices(ESD) identified on the item record?
-
Issue exception code 3
-
Issue excepiton code 4
-
Type cargo code 3
-
Type cargo code 4
Correct Answer
A. Type cargo code 3Explanation
Electrostatic sensitive devices (ESD) are identified on the item record by using type cargo code 3. This code is specifically assigned to items that are sensitive to electrostatic discharge, indicating that special handling and precautions are required when dealing with these items.Rate this question:
-
- 23.
Which TRIC and activity code is used to process an ESD on a detail record to maintenance for testing?
-
ISU E
-
MSI E
-
ISU C
-
MSI C
Correct Answer
A. MSI CExplanation
The correct answer is MSI C. This TRIC and activity code is used to process an ESD (Equipment Service Design) on a detail record for maintenance testing.Rate this question:
-
- 24.
The responsibility for maintaining effective property management of all Air Force property belongs to
-
Commanders
-
Supervisors
-
Flight chiefs
-
Individuals at all levels
Correct Answer
A. Individuals at all levelsExplanation
The responsibility for maintaining effective property management of all Air Force property belongs to individuals at all levels. This means that every individual within the Air Force, regardless of their rank or position, is accountable for the proper management and care of the property. This ensures that everyone understands the importance of maintaining and safeguarding the assets of the Air Force, promoting a culture of responsibility and accountability throughout the organization.Rate this question:
-
- 25.
Who appoints responsible individuals with the lawful duty to maintain accurate records of property?
-
MAJCOM POC
-
Chief enlisted manager
-
Logisitcs group commander
-
Wing or vice commander
Correct Answer
A. Wing or vice commanderExplanation
The wing or vice commander is responsible for appointing individuals with the lawful duty to maintain accurate records of property. This is because the wing or vice commander holds a high position of authority within the organization and has the power to delegate responsibilities to ensure the proper maintenance and management of property records. The MAJCOM POC, chief enlisted manager, and logistics group commander may have other important roles within the organization, but appointing responsible individuals for maintaining accurate property records is not explicitly stated as their duty.Rate this question:
-
- 26.
Who was chartered by HQUSAF as the centralized Air Force prgoram manager for all Mechanized Materiel Handling Systems(MMHS) and Storage aids(SAS)?
-
Storage systems program office
-
Materials Handling Engineering Office
-
Materials Hnadling Development Office
-
Materials storage and Handling office
Correct Answer
A. Materials Handling Engineering OfficeExplanation
The Materials Handling Engineering Office was chartered by HQUSAF as the centralized Air Force program manager for all Mechanized Materiel Handling Systems (MMHS) and Storage aids (SAS). This office is responsible for overseeing and managing the development, implementation, and maintenance of storage systems and materials handling equipment within the Air Force. They ensure that the Air Force has efficient and effective systems in place for storing and handling materials, which is crucial for the smooth operation and logistics of the force.Rate this question:
-
- 27.
Which type of warehouse equipment is part of a Storage Aid System(SAS)?
-
Conveyors
-
Affixed cranes
-
Overhead trolleys
-
General-purpose shelves
Correct Answer
A. General-purpose shelvesExplanation
General-purpose shelves are part of a Storage Aid System (SAS) because they provide a means of storing and organizing various items in a warehouse. These shelves can be used to store a wide range of products, making them versatile and suitable for different types of warehouses. Unlike conveyors, affixed cranes, and overhead trolleys, which are more specialized equipment, general-purpose shelves are commonly found in most warehouses and are essential for efficient storage and retrieval of goods.Rate this question:
-
Quiz Review Timeline (Updated): Mar 20, 2023 +
Our quizzes are rigorously reviewed, monitored and continuously updated by our expert board to maintain accuracy, relevance, and timeliness.
-
Current Version
-
Mar 20, 2023Quiz Edited by
ProProfs Editorial Team -
Apr 07, 2010Quiz Created by
Emmanuella
Back to top