FSG Reg Quiz 9 (Praneet) - Done

1. In regard to the 95th percentile template what is the minimum distance between the bottom most cicle 200m and rearmost face of the pedals ?(in mm)

915

930

945

975

The minimum distance between the bottommost circle and the rearmost face of the pedals is 915mm.

Explanation

The minimum distance between the bottommost circle and the rearmost face of the pedals is 915mm.

2. If A team wants to Implement Traction Control in the vehicle,Which of the following methodologies is not allowed ?

Electronically Cut the Throttle

Cut The Fuel Supply

Delay The Spark Timing

Shut the Cylinders

Cutting the throttle electronically means reducing or limiting the amount of air or fuel entering the engine, which can be used to control the vehicle's traction. This method is not allowed because it directly affects the engine's power output and can potentially cause engine damage or malfunction. The other options, such as cutting the fuel supply, delaying the spark timing, or shutting the cylinders, do not directly manipulate the throttle but rather adjust other aspects of the engine's operation to control traction.

Explanation

Cutting the throttle electronically means reducing or limiting the amount of air or fuel entering the engine, which can be used to control the vehicle's traction. This method is not allowed because it directly affects the engine's power output and can potentially cause engine damage or malfunction. The other options, such as cutting the fuel supply, delaying the spark timing, or shutting the cylinders, do not directly manipulate the throttle but rather adjust other aspects of the engine's operation to control traction.

3. What is the the symbol for the Master Switch ?

White Sparked Red Edged Blue Triangle

Blue Sparked White Edged Red Triangle

Blue Sparked Red Edged White Triangle

Red sparked White edged Blue Triangle

The symbol for the Master Switch is a Red sparked White edged Blue Triangle.

Explanation

The symbol for the Master Switch is a Red sparked White edged Blue Triangle.

4. How much is the Maximum Allowable Steering Free play ?

5'

7'

9'

9.5'

not-available-via-ai

Explanation

not-available-via-ai

5. Which of the following is not true about the BOTS ?

Repeated actuation should Not Restore Power to the electronic components of the car.

It Must be implemented with Analog Components

It Cannot be connected in Series with the other shutdown buttons

)It is to be implemented as a switch either push pull or flip type.

The BOTS (Button Operated Transmission System) cannot be connected in series with the other shutdown buttons. This means that it cannot be linked or placed in a sequence with other buttons that are used to shut down the system. This suggests that the BOTS operates independently and does not rely on or affect the functioning of other shutdown buttons in the car.

Explanation

The BOTS (Button Operated Transmission System) cannot be connected in series with the other shutdown buttons. This means that it cannot be linked or placed in a sequence with other buttons that are used to shut down the system. This suggests that the BOTS operates independently and does not rely on or affect the functioning of other shutdown buttons in the car.

6. Amongst these which is not allowed to be connected in relay in the electric circuit as part of the shutdown system ?

PMS,SMS

PMS

PMS,SMS,BOTS

BOTS

The correct answer is PMS. PMS stands for Power Management System, which is an essential part of the shutdown system in an electric circuit. It is responsible for monitoring and controlling the power supply to different components. Therefore, it is allowed to be connected in relay as part of the shutdown system. On the other hand, SMS (Short Message Service) and BOTS (Robotic Software) are not directly related to the shutdown system in an electric circuit, so they are not allowed to be connected in relay.

Explanation

The correct answer is PMS. PMS stands for Power Management System, which is an essential part of the shutdown system in an electric circuit. It is responsible for monitoring and controlling the power supply to different components. Therefore, it is allowed to be connected in relay as part of the shutdown system. On the other hand, SMS (Short Message Service) and BOTS (Robotic Software) are not directly related to the shutdown system in an electric circuit, so they are not allowed to be connected in relay.

7. What is the minimum height of the Number sticker which appears on the vehicle ?

150.4mm

150.8 mm

154.8mm

152.4mm

The minimum height of the number sticker on the vehicle is 152.4mm.

Explanation

The minimum height of the number sticker on the vehicle is 152.4mm.

8. What is the minimum area and height of the head restraint ?(in sq inches)

234,28

235,26

235,28

236,28

The minimum area and height of the head restraint is 235 sq inches and 28 inches respectively.

Explanation

The minimum area and height of the head restraint is 235 sq inches and 28 inches respectively.

9. What is the minimum Input power to be relayed to the brake light ?

5 W

10 W

15 W

20 W

The minimum input power to be relayed to the brake light is 15 W. This means that the brake light requires at least 15 watts of power to function properly.

Explanation

The minimum input power to be relayed to the brake light is 15 W. This means that the brake light requires at least 15 watts of power to function properly.

10. Total Number of points for Skid Pad+Efficiency+Business Presentation ?

200

225

250

275

The total number of points for Skid Pad, Efficiency, and Business Presentation is 225.

Explanation

The total number of points for Skid Pad, Efficiency, and Business Presentation is 225.