Afr Online Quiz 1

Approved & Edited by ProProfs Editorial Team
The editorial team at ProProfs Quizzes consists of a select group of subject experts, trivia writers, and quiz masters who have authored over 10,000 quizzes taken by more than 100 million users. This team includes our in-house seasoned quiz moderators and subject matter experts. Our editorial experts, spread across the world, are rigorously trained using our comprehensive guidelines to ensure that you receive the highest quality quizzes.
Learn about Our Editorial Process
| By Omkarpatil24
O
Omkarpatil24
Community Contributor
Quizzes Created: 3 | Total Attempts: 1,259
Questions: 10 | Attempts: 344

SettingsSettingsSettings
Maintenance Quizzes & Trivia

.


Questions and Answers
  • 1. 

     Maintenance plugs must include a positive locking feature which prevents the plug from unintentionally  .............

    • A.

      Becoming loose

    • B.

      Conducting very high current

    • C.

      Conducting very low current

    • D.

      Becoming hot

    Correct Answer
    A. Becoming loose
    Explanation
    Maintenance plugs must include a positive locking feature which prevents the plug from unintentionally becoming loose. This is important because if the plug becomes loose, it can lead to a loss of electrical connection and potential safety hazards. The positive locking feature ensures that the plug remains securely in place, maintaining a reliable and safe electrical connection.

    Rate this question:

  • 2. 

    What is the minimum thickness of of tube to be used in case of Alternative Steel Tubing for Side Impact Structure?

    • A.

      1.6

    • B.

      1.2

    • C.

      1.0

    • D.

      204

    Correct Answer
    B. 1.2
    Explanation
    The minimum thickness of the tube to be used in the case of Alternative Steel Tubing for Side Impact Structure is 1.2.

    Rate this question:

  • 3. 

    Teams that fails to make  their presentations during assigned time will recieve

    • A.

      -100 points for the event

    • B.

      -50 points for the event

    • C.

      -10 points for the event

    • D.

      0 points for the event

    Correct Answer
    D. 0 points for the event
    Explanation
    If a team fails to make their presentations during the assigned time, they will receive 0 points for the event. This means that they will not be awarded any points for their performance. This could be due to the fact that the team did not fulfill their responsibility of presenting within the given time frame, and as a result, they are not eligible for any points.

    Rate this question:

  • 4. 

    The car must be equipped with a .............. brake light. with a .......... background and a rectangular, triangular or near round shape with a minimum shining surface of at least 15cm². And when LED lights are used without a diffuser, they may not be more than ......... mm apart. 

    • A.

      Yellow, black, 25

    • B.

      Red, black, 20

    • C.

      Red, yellow, 30

    • D.

      Yellow, red, 30

    Correct Answer
    B. Red, black, 20
    Explanation
    The car must be equipped with a red brake light with a black background and a rectangular, triangular, or near round shape with a minimum shining surface of at least 15cm². When LED lights are used without a diffuser, they may not be more than 20mm apart.

    Rate this question:

  • 5. 

    Which of the following modifications is not specifically permitted without voiding Inspection Approval once vehicle is approved to compete in the dynamic events

    • A.

      Substitution of the head restraint or seat insert for different drivers

    • B.

      Replacement of worn chains or sprockets

    • C.

      Replenishment of fluids

    • D.

      Adjustment of brake bias

    Correct Answer
    B. Replacement of worn chains or sprockets
    Explanation
    The question asks which modification is not specifically permitted without voiding Inspection Approval once the vehicle is approved to compete in the dynamic events. The correct answer is "Replacement of worn chains or sprockets." This means that replacing worn chains or sprockets is not allowed without voiding the Inspection Approval. The other options, such as substituting the head restraint or seat insert for different drivers, replenishing fluids, and adjusting brake bias, are specifically permitted without voiding the Inspection Approval.

    Rate this question:

  • 6. 

    A .........mm shrouded banana jack must be used for the GLV ground measuring point.

    • A.

      4

    • B.

      6

    • C.

      8

    • D.

      10

    Correct Answer
    A. 4
    Explanation
    A 4mm shrouded banana jack must be used for the GLV ground measuring point because it is the appropriate size for the task.

    Rate this question:

  • 7. 

    How many sets of tires and wheels needs to be included in the cost report?

    • A.

      One for every type of tires the car is going to use (i.e., dry and rain tires)

    • B.

      Only one, rain ones

    • C.

      It has not to be included

    • D.

      Only one, dry ones

    Correct Answer
    D. Only one, dry ones
    Explanation
    The cost report should only include one set of tires and wheels, specifically the dry tires. This implies that the car will only be using dry tires and not rain tires. Therefore, there is no need to include the cost of rain tires in the report.

    Rate this question:

  • 8. 

     If  Impact Attenuator Assembly is not integral with the frame minimum of four ...............mm Metric grade .............. bolts must attach the Impact Attenuator Assembly to the Front Bulkhead.

    • A.

      8, 8.8

    • B.

      10, 5

    • C.

      10, 8.8

    • D.

      8, 5

    Correct Answer
    A. 8, 8.8
    Explanation
    If the Impact Attenuator Assembly is not integral with the frame, a minimum of four bolts with a metric grade of 8.8 must be used to attach the assembly to the Front Bulkhead.

    Rate this question:

  • 9. 

    If the shutdown circuit is opened by the AMS, the IMD or the BSPD the tractive system must remain disabled until being manually reset by a person directly at the car by ..............

    • A.

      Any person of the team

    • B.

      Judges

    • C.

      Driver

    • D.

      Safety personnel at even

    Correct Answer
    A. Any person of the team
    Explanation
    If the shutdown circuit is opened by the AMS, the IMD or the BSPD, the tractive system must remain disabled until being manually reset by a person directly at the car. This means that any person of the team can perform the manual reset, indicating that it does not have to be a specific individual such as the judges, driver, or safety personnel. The responsibility can be shared among the team members, allowing for flexibility in addressing the issue and ensuring the tractive system is safely reset.

    Rate this question:

  • 10. 

    If any vehicle on track is observed to have large, uncontrolled movements of aerodynamic devices, then officials will have the right to .............. Flag the car for inspection and the car may be excluded from that run and until any issue identified is rectified.

    • A.

      White

    • B.

      Checked

    • C.

      Black

    • D.

      Yellow

    Correct Answer
    C. Black
    Explanation
    If any vehicle on track is observed to have large, uncontrolled movements of aerodynamic devices, officials will have the right to flag the car for inspection and the car may be excluded from that run and until any issue identified is rectified. The color black is typically used as a flag to indicate a penalty or disqualification. Therefore, the correct answer is black.

    Rate this question:

Back to Top Back to top
Advertisement
×

Wait!
Here's an interesting quiz for you.

We have other quizzes matching your interest.