Karen
Settings
Sample questions for Autocad exam created using Autocad official training guide.
- 1.By default, AutoCAD has the following workspaces
- A.
2D Drafting & Annotation
- B.
3D Modeling
- C.
My workspace
- D.
AutoCAD Classic
- 2.Which Key do you press to cycle through the available snap points.
- A.
Ctrl
- B.
Shift
- C.
Tab
- D.
Alt
- 3.One of the below options is wrong about type of Autocad drawing units.
- A.
Architectural
- B.
Engineering
- C.
Millimeter
- D.
Decimal
- 4.Object snap tracking works in combination with object snaps to enable you to temporarily acquire and track up to how many points?
- A.
One
- B.
Two
- C.
Five
- D.
Seven
- 5.The following settings can be made for polar tracking
- A.
Increment angle
- B.
Additional angles
- C.
Track using all polar angles settings
- 6.With a hot grip you can perform these editing tasks
- A.
Move
- B.
Offset
- C.
Rotate
- D.
Scale
- 7.Inorder to Move an object
- A.
Select a base point,followed by a point to define where the object is moving to.
- B.
Use the Displacement option
- C.
Select object for grips, then move
- D.
Above all
- 8.Copy command also creates Multiples copies of an object
- A.
True
- B.
False
- 9.
![What is the angle that you use to rotate the chair from point A to point B? - ProProfs]( "What is the angle that you use to rotate the chair from point A to point B?")
What is the angle that you use to rotate the chair from point A to point B?- A.
90
- B.
-90
- C.
-270
- D.
None
- 10.If you need the text to be reversed, when you mirror the text,then you need to set
- A.
MIRRTEXT to 0
- B.
MIRRTEXT to 1
- C.
TEXTMIRR to 0
- D.
TEXTMIRR to 1
- 11.
![Inorder to get the below result using Object A, you have to set the number of rows and columns to: - ProProfs]( "Inorder to get the below result using Object A, you have to set the number of rows and columns to:")
Inorder to get the below result using Object A, you have to set the number of rows and columns to:- A.
4,1
- B.
4,2
- C.
4,3
- D.
4,4
- 12.When using copy with grips, select Copy after you have selected an option, such as Move, Mirror, Rotate, Scale, or Stretch.
- A.
True
- B.
False
- 13.By selecting one of the following, the Objects on the layer are not visible and are not considered when the drawing is regenerated.
- A.
When you off the layer
- B.
When you froze the layer
- C.
When you lock the layer
- D.
None
- 14.When you use the Match Properties command, you can select multiple source objects.
- A.
True
- B.
False
- 15.Using object snaps to select points for Inquiry commands is Critical
- A.
True
- B.
False
- 16.
![What happens if you fillet these two lines with radius 0 - ProProfs]( "What happens if you fillet these two lines with radius 0")
What happens if you fillet these two lines with radius 0- A.
Cannot fillet
- B.
Sharp corner
- C.
None
- 17.
![Which of the following can be joined using Join command - ProProfs]( "Which of the following can be joined using Join command")
Which of the following can be joined using Join command- A.
A
- B.
B
- C.
C
- D.
D
- 18.The following are some of the properties and settings that you can save in a layout, except
- A.
Plot scale
- B.
Paper size
- C.
Line weight
- D.
Drawing orientation
- 19.You can set viewport scale factor by
- A.
Typing vscale
- B.
Typing vpscale
- C.
Typing viewportscale
- D.
None
- 20.What happens when you set VPROTATEASSOC System Variable to 0
- A.
When a viewport is rotated, the view inside is not rotated.
- B.
When a viewport is rotated, the view inside is rotated to match the rotation of the viewport.
- 21.With the Multiline Text editor, you can do all of the following, except:
- A.
Insert numbered and bulleted lists
- B.
Insert specific drafting and engineering symbols
- C.
Insert pictures
- D.
Create Fields such as date, time and author.
- 22.If you copy and paste text from another drawing or insert a block into a drawing that has thesame Text Style name with different properties, the text properties of the host drawing will takeprecedence.
- A.
True
- B.
False
- 23.
![What is the command used to draw the above dimension line? - ProProfs]( "What is the command used to draw the above dimension line?")
What is the command used to draw the above dimension line?- A.
Dimjogged
- B.
Dimjogline
- C.
Joggeddim
- D.
Joggedline
- 24.If you modify a dimension style, all dimensions using that style in the drawing updateautomatically.
- A.
True
- B.
False
- 25.
![The multileaders 4,8,9 represent: - ProProfs]( "The multileaders 4,8,9 represent:")
The multileaders 4,8,9 represent:- A.
Aligned Multileaders
- B.
Vertical Multileaders
- C.
Collected Multileaders
- D.
Horizontal Multileaders
- 26.
![What type of Island detection type is this? - ProProfs]( "What type of Island detection type is this?")
What type of Island detection type is this?- A.
Inner
- B.
Outer
- C.
Ignore
- D.
Normal
- 27.Using Purge command we can purge referenced blocks.
- A.
True
- B.
False
- 28.When you Explode a block, the geometry returns to its original properties.
- A.
True
- B.
False
- 29.
![Options used to draw this polyline; - ProProfs]( "Options used to draw this polyline;")
Options used to draw this polyline;- A.
Line
- B.
Arc
- C.
Tamper
- D.
Width
- 30.You cannot fillet or chamfer the first segment of a polyline with the last segment of the same polyline.
- A.
True
- B.
False
Back to top