AutoCAD Level Assessment Quiz
-
By default, AutoCAD has the following workspaces
-
2D Drafting & Annotation
-
3D Modeling
-
My workspace
-
AutoCAD Classic
-
Are you studying the basics of AutoCAD? If your answer is yes, you must try this AutoCAD level assessment quiz that we created below. AutoCAD, as most of you might know, is a commercial computer-aided design and drafting software application. If you think you're good at using this software, then the below-stated quiz is perfect for you. Try it, and See moreyou'll get the chance to assess your understanding of the AutoCAD software.
Quiz Preview
- 2.
Which Key do you press to cycle through the available snap points?
-
Ctrl
-
Shift
-
Tab
-
Alt
Correct Answer
A. TabExplanation
To cycle through the available snap points, the correct key to press is Tab. The Tab key is commonly used to move the focus between different elements or fields in a user interface. In this context, pressing the Tab key allows the user to navigate and select different snap points in a sequential manner.Rate this question:
-
- 3.
One of the below options is wrong about type of Autocad drawing units. Which one is it?
-
Architectural
-
Engineering
-
Millimeter
-
Decimal
Correct Answer
A. MillimeterExplanation
The incorrect option is "Millimeter" because millimeter is a valid unit of measurement in AutoCAD for specifying the size and dimensions of objects in the drawing. The other options, namely "Architectural," "Engineering," and "Decimal," are also valid unit types in AutoCAD.Rate this question:
-
- 4.
Object snap tracking works in combination with object snaps to enable you to temporarily acquire and track up to how many points?
-
One
-
Two
-
Five
-
Seven
Correct Answer
A. SevenExplanation
Object snap tracking allows you to temporarily acquire and track up to seven points in combination with object snaps. This means that you can easily align and snap to multiple points on different objects while drawing or editing in a CAD software. By enabling object snap tracking, you can efficiently create accurate and precise designs by referencing and tracking multiple points simultaneously.Rate this question:
-
- 5.
Which of the following settings can be made for polar tracking?
-
Increment angle
-
Additional angles
-
Track using all polar angles settings
Correct Answer(s)
A. Increment angle
A. Additional anglesExplanation
Polar tracking is a feature in CAD software that allows users to snap to specific angles or increments along a polar coordinate system. The "Increment angle" setting allows users to specify the angle at which the cursor will snap while drawing or editing objects. The "Additional angles" setting allows users to add custom angles to the polar tracking list, providing more flexibility in snapping to specific angles. The "Track using all polar angles" setting enables the cursor to snap to any angle within the polar coordinate system, providing the most freedom in drawing and editing objects.Rate this question:
-
- 6.
With a hot grip, which of these editing tasks can you perform?
-
Move
-
Offset
-
Rotate
-
Scale
Correct Answer(s)
A. Move
A. Rotate
A. ScaleExplanation
With a hot grip, you can perform the tasks of moving, rotating, and scaling. A hot grip refers to the ability to manipulate an object or element in a digital editing software by clicking and dragging it with the mouse. This allows you to reposition (move), rotate, and resize (scale) the selected object or element according to your desired adjustments in the editing process.Rate this question:
-
- 7.
In order to move an object, ________________
-
Select a base point,followed by a point to define where the object is moving to.
-
Use the Displacement option
-
Select object for grips, then move
-
All of the above
Correct Answer
A. All of the aboveExplanation
The correct answer is "All of the above" because all three options mentioned are valid methods for moving an object. The first option suggests selecting a base point and a point to define the destination of the object. The second option suggests using the Displacement option, which allows you to specify the distance and direction of the movement. The third option suggests selecting the object's grips and then moving them to the desired location. Therefore, all three options are correct ways to move an object.Rate this question:
-
- 8.
Copy command also creates Multiples copies of an object. True/False?
-
True
-
False
Correct Answer
A. TrueExplanation
The statement is true because the copy command is used to create multiple copies of an object. This command allows users to duplicate an existing object and create identical copies of it. By using the copy command, users can save time and effort by replicating objects instead of creating them from scratch.Rate this question:
-
- 9.
What is the angle that you use to rotate the chair from point A to point B?
-
90
-
-90
-
-270
-
None
Correct Answer
A. -90Explanation
The angle used to rotate the chair from point A to point B is -90 degrees. This means that the chair needs to be rotated clockwise by 90 degrees in order to reach point B from point A.Rate this question:
-
- 10.
When you use the Match Properties command, you can select multiple source objects. True/False?
-
True
-
False
Correct Answer
A. FalseExplanation
When you use the Match Properties command, you can only select one source object at a time. This command allows you to match the properties of one object to another object. Therefore, the correct answer is false.Rate this question:
-
- 11.
Using object snaps to select points for Inquiry commands is Critical
-
True
-
False
Correct Answer
A. TrueExplanation
Using object snaps to select points for Inquiry commands is critical because object snaps allow for precise and accurate selection of points on objects. This is essential when using Inquiry commands, as they require specific points to be selected for measurement or analysis. Object snaps ensure that the selected points are on the intended objects, reducing the chances of errors or inaccuracies in the results obtained from Inquiry commands. Therefore, using object snaps is crucial for the effective and reliable use of Inquiry commands.Rate this question:
-
- 12.
What happens if you fillet these two lines with radius 0?
-
Cannot fillet
-
Sharp corner
-
None
Correct Answer
A. Sharp cornerExplanation
If you fillet two lines with a radius of 0, it means that you are trying to round off the sharp corners between the lines. However, since the radius is 0, there is no space to create a curved fillet. Therefore, the result would be a sharp corner, as the lines would remain in their original angular form without any rounding.Rate this question:
-
- 13.
Which of the following can be joined using Join command?
-
A
-
B
-
C
-
D
Correct Answer(s)
A. A
A. CExplanation
The Join command can be used to join tables or datasets together based on a common key or column. In this case, options A and C can be joined using the Join command.Rate this question:
-
- 14.
If you modify a dimension style, all dimensions using that style in the drawing updateautomatically. True/False?
-
True
-
False
Correct Answer
A. TrueExplanation
When you modify a dimension style in a drawing, all dimensions that are using that style will automatically update. This means that any changes made to the dimension style, such as text height, arrow size, or units, will be applied to all dimensions in the drawing that are using that style. This can save time and effort, as you don't have to manually update each dimension individually.Rate this question:
-
- 15.
When you Explode a block, the geometry returns to its original properties. True/False?
-
True
-
False
Correct Answer
A. TrueExplanation
When you explode a block, it means you are breaking it down into its individual components or elements. By doing so, the geometry of the block returns to its original properties, meaning that it reverts back to its original form before it was grouped or combined into a block. Therefore, the statement "When you Explode a block, the geometry returns to its original properties" is true.Rate this question:
-
- 16.
Which options are used to draw this polyline?
-
Line
-
Arc
-
Tamper
-
Width
Correct Answer(s)
A. Line
A. Arc
A. WidthExplanation
The options "line," "arc," and "width" are used to draw this polyline. A "line" is used to create straight segments, an "arc" is used to create curved segments, and "width" is used to define the thickness of the polyline.Rate this question:
-
Quiz Review Timeline (Updated): May 7, 2023 +
Our quizzes are rigorously reviewed, monitored and continuously updated by our expert board to maintain accuracy, relevance, and timeliness.
-
Current Version
-
May 07, 2023Quiz Edited by
ProProfs Editorial Team -
Aug 07, 2018Quiz Created by
Jenarlyn Mutya
Back to top