Rawlinson General Shop Safety
23 Questions
| Total Attempts: 838
General Shop Safety
Questions and Answers
- 1.Think about what you are doing. Keep concentration on the ____ at hand. Stay alert! Do not rush.
- A.
Machine
- B.
Task
- C.
Person
- D.
Outline
- 2.Tools and machines may not be used until student has scored ____ percent on the safety test for that tool or machine.
- A.
70
- B.
80
- C.
90
- D.
100
- E.
60
- 3.Tool and machines may not be used unless your ____ is present.
- A.
Student
- B.
Table
- C.
Cutter buddy
- D.
Wood
- E.
Project
- 4._____ that detracts (takes away from) the activity will not be tolerated.
- A.
Behavior
- B.
Machines
- C.
Work
- D.
Food
- 5.Keep the work area _____ and orderly throughout class time.
- A.
Moving
- B.
Sharp
- C.
Away
- D.
Clean
- 6.Do not ____ an airhose onto the skin or another person. Playing with the airhose is a severe violation.
- A.
Use
- B.
Force
- C.
Spray
- D.
Wind up
- E.
Throw
- 7.Wear proper apparel to protect yourself and clothing. Do not wear loose ____ or jewelry.Sandals and open toed shoes are not permitted.
- A.
Ties
- B.
Clothing
- C.
Hoodie strings
- D.
Hair
- E.
All or the above
- 8.Always wear ________ protection.
- A.
Apron
- B.
Good
- C.
Eye
- D.
Hair
- E.
None
- 9.Secure(clamp) _________ or unstable workpieces with clamps or a vice instead of trying to hold it with your hand.
- A.
Large
- B.
Plastic
- C.
Metal
- D.
Small
- E.
Round
- 10.Do not _________. Stay on balance at all times.
- A.
Overreach
- B.
Stand
- C.
Sing
- D.
Talk
- 11.Always _____ machine before making any adjustments.
- A.
Leave
- B.
Disconnect
- C.
Ask permission
- D.
Quit
- E.
Test
- 12.Keep_____ away from the cutting surfaces. (At least 2" in most cases.
- A.
Fingers
- B.
Stock
- C.
Wood
- D.
Sawdust
- E.
Brooms
- 13.Never talk to or in any way ____________ the machine operator.
- A.
Move
- B.
Unplug
- C.
Distract
- D.
Help
- E.
Watch out for
- 14.Never run in the shop!
- A.
True
- B.
False
- 15.It is OK to operate machines without the guards as long as you are in a hurry.
- A.
True
- B.
False
- 16.Report all injuries immediately.
- A.
True
- B.
False
- 17.Replace materials and tools after each use. Do not wait until the end of the period.
- A.
True
- B.
False
- 18.Safety glasses are to be worn at all times in the shop area.
- A.
True
- B.
False
- 19.Examples of horseplay are
- A.
Slapping
- B.
Pushing
- C.
Screaming
- D.
Pushing
- E.
All of these are examples of horseplay.
- 20.
![Clean up is ONLY to be done at the end of the period. Do not waste your time cleaning up during lab time. - ProProfs]( "Clean up is ONLY to be done at the end of the period. Do not waste your time cleaning up during lab time.")
Clean up is ONLY to be done at the end of the period. Do not waste your time cleaning up during lab time.- A.
True
- B.
False
- 21.It is OK to go back into the classroom after the class is in the shop.
- A.
True
- B.
False
- 22.You will get a office referral if you throw sawdust on people or hold the project room door shut to keep someone inside.
- A.
TRUE
- B.
Maybe
- C.
False
- 23.If you are caught damaging tools or intentionally painting something you are not supposed to (doorknob, etc) you will not be allowed to work in the shop area again
- A.
True
- B.
False
In a general shop, one finds a lot of tools and equipment that require special care when handling and should only be used for their designated uses. Do you think you have what it takes to work in a general shop? If you just said...
Questions: 38 | Attempts: 9212 | Last updated: Oct 23, 2020
-
Sample QuestionFireextinguisherType A is used for
All students are required to pass this test with 100% before they will be able to use the prototyping lab and lab tools.
Questions: 29 | Attempts: 1462 | Last updated: Sep 22, 2020
-
Sample QuestionKeep your work area clean and orderly; neatly arrange equipment and material. Do not allow parts, metal, wires, scrap or other material to accumulate on the shop floors or in work areas. Place drink cups, cans, bottles, paper, lunch scraps, etc., in the proper containers.
When operating in any such craft as woodwork or metalwork, safety should always be the first priority. After all, a job done well is a job done safely! How much do you know about the proper safety protocols involved?
Questions: 33 | Attempts: 1026 | Last updated: Oct 4, 2017
-
Sample QuestionAlways wear eye_____________
What Dog Breed Does Your Personality Match With Quiz
What Dog Breed Does Your Personality Match With Quiz
Which U.S. City Is Suitable for Your Personality Type? Quiz!
Which U.S. City Is Suitable for Your Personality Type? Quiz!
Back to top