Keep Up Your Woodshop Safety - Woodshop Safety Procedures Test

20 Questions | Total Attempts: 8113

SettingsSettingsSettings
Please wait...
Keep Up Your Woodshop Safety - Woodshop Safety Procedures Test

What safety procedures should you follow when using woodworking machines? Always wear safety glasses or goggles, or a face shield (with safety glasses or goggles). Wear dust masks when required. Wear hearing protection that is suitable for the level and frequency of the noise you are exposed to in the woodworking area. Keep Up Your Woodshop safety in this Woodshop Safety Procedures Test .


Questions and Answers
  • 1. 
    Eye protection must be worn:
    • A. 

      When working with any tool or machine.

    • B. 

      At all times when in the woodshop.

    • C. 

      When teacher reminds me.

  • 2. 
    Proper footwear for the woodshop is:
    • A. 

      Work boots

    • B. 

      Any type of shoe

    • C. 

      Shoes must cover the toes, heel and top of the foot

  • 3. 
    Those students allowed to work in the shop are:
    • A. 

      Anyone with previous experience.

    • B. 

      Only individuals that have completed their safety and training tests.

    • C. 

      Anyone that thinks they know how.

  • 4. 
    Equipment and tools available for you to use are:
    • A. 

      Only tools and machines that I have been instructed in how to use.

    • B. 

      Any tool in the shop

    • C. 

      Any tool or machine that I can figure out how to use.

  • 5. 
    Materials for projects is not provided, except for:
    • A. 

      Anything I can find in the shop.

    • B. 

      Materials left out on the bench tops.

    • C. 

      Wood that is given to me by the instructor.

  • 6. 
    The FIRST priority when working at a machine is:
    • A. 

      That I don't make any mistakes.

    • B. 

      That I watch the other people around me.

    • C. 

      That I am always thinking about safety.

  • 7. 
    Before turning on one of the machines:
    • A. 

      Turn on your phone so you can't hear the machine.

    • B. 

      Turn on the dust collection system or make sure that it is on.

    • C. 

      Yell out to everyone that you are about to start a machine.

  • 8. 
    On the band saw the guard should be set:
    • A. 

      1/8" to 1/4" above the material.

    • B. 

      Holding the material tight against the table.

    • C. 

      Out of the way so you can see.

  • 9. 
    When holding material at the miter saw, the safety zone is:
    • A. 

      Anywhere as long as I am holding it firmly.

    • B. 

      As far away from the blade as possible.

    • C. 

      Six inches away from the blade.

  • 10. 
    When using the portable sanders:
    • A. 

      Sand in the direction of the grain.

    • B. 

      Hold the material firmly.

    • C. 

      All of the above.

  • 11. 
    When sanding material at the disk sander I should sand on the:
    • A. 

      Down side of the disk.

    • B. 

      Either side of the disk.

    • C. 

      Up side of the disk.

  • 12. 
    When using the air-powered nailer:
    • A. 

      Pull the hose across the room to my bench.

    • B. 

      Tell everyone to 'Stand back'.

    • C. 

      Always hold nailer tight against the material.

  • 13. 
    When using the drill press I need to remember to:
    • A. 

      Make sure long hair is tied back.

    • B. 

      Hold the material firmly while drilling

    • C. 

      All of the above.

  • 14. 
    I can use my phone in the shop when:
    • A. 

      I am not using a machine.

    • B. 

      The teacher can't see me.

    • C. 

      Never

  • 15. 
    I understand that if I do not follow the safety rules and procedures I will:
    • A. 

      Greatly increase the possibility of injury.

    • B. 

      Lose my privilege to work on machines.

    • C. 

      All of the above.

  • 16. 
    When using the miter saw:
    • A. 

      Hold the material as close to the blade as you can.

    • B. 

      Keep the wood tight against the fence.

    • C. 

      Hold the blade tight against the wood before you start the saw.

  • 17. 
    This saw:
    • A. 

      Cuts only straight lines.

    • B. 

      Has a large band for a blade.

    • C. 

      Cuts perfect miters.

  • 18. 
    This machine:
    • A. 

      Puts screws in.

    • B. 

      Makes wood round.

    • C. 

      Drills perfectly round holes.

  • 19. 
    This saw:
    • A. 

      Cuts irregular lines and scroll work.

    • B. 

      Cuts only straight lines.

    • C. 

      Cuts perfectly round holes.

  • 20. 
    This saw:
    • A. 

      Cuts only straight lines.

    • B. 

      Cuts perfectly round holes.

    • C. 

      Can cut a hole in the middle of the board.

Back to Top Back to top