Dorfketal Network Engineer Skill Test
-
What is APIPA related to ?
-
IP address
-
Multimedia
-
Software License
-
Programming
-
The Dorfketal Network Engineer Skill Test assesses key competencies in network troubleshooting, system configuration, and understanding of core network protocols and services, pivotal for aspiring network engineers.
Quiz Preview
- 2.
From where you can change the password of lotus notes?
Explanation
To change the password of Lotus Notes, you can go to the Security section. This section is likely to provide options and settings related to user authentication, password management, and access control. Within the Security settings, there should be an option to change the password, allowing users to update their login credentials for Lotus Notes.Rate this question:
- 3.
You are helping a customer who is unable to open one of the icons on his desktop. Upon further investigation you discover it is a shared network application and no one else is having trouble. What action should you take first?
-
Delete and re-install the application
-
Go to Control Panel, Network and confirm that the settings are correct
-
Have them reboot
-
Make sure the path is mapped in My Network Places
-
Go to My Computer and confirm that the host drive is mapped, or the path exists in Network Places
Correct Answer
A. Go to My Computer and confirm that the host drive is mapped, or the path exists in Network PlacesExplanation
The first action to take in this situation is to go to My Computer and confirm that the host drive is mapped, or the path exists in Network Places. This is important because if the drive is not mapped or the path does not exist, the shared network application will not be accessible. By checking this, you can determine if the issue lies with the mapping or path, and then take appropriate steps to resolve it.Rate this question:
-
- 4.
Your company has a LAN in its downtown office and has now set up a LAN in the manufacturing plant in the suburbs. To enable everyone to share data and resources between the two LANs, what type of device(s) are needed to connect them? Choose the most correct answer.
-
Modem
-
Cable
-
Hub
-
Router
Correct Answer
A. RouterExplanation
To enable data and resource sharing between the LANs in the downtown office and the manufacturing plant in the suburbs, a router is needed. A router is a networking device that connects multiple networks together and routes data packets between them. It can analyze the destination IP address of each packet and determine the most efficient path for it to reach its destination. Therefore, a router is the most suitable device for connecting the two LANs and facilitating communication and data sharing between them.Rate this question:
-
- 5.
Which of the following TCP/IP protocol is used for transferring electronic mail messages from one machine to another?
-
FTP
-
SNMP
-
SMTP
-
RPC
Correct Answer
A. SMTPExplanation
SMTP (Simple Mail Transfer Protocol) is the correct answer. SMTP is a TCP/IP protocol that is specifically designed for transferring electronic mail messages from one machine to another. It is responsible for the sending, receiving, and relaying of email messages across the internet. FTP (File Transfer Protocol) is used for transferring files, SNMP (Simple Network Management Protocol) is used for network management, and RPC (Remote Procedure Call) is used for communication between networked computers.Rate this question:
-
- 6.
What is BIOS an acronym for?
-
Bootstrap initial operating system
-
basic input output startup
-
Boot initial operating startup
-
Basic input output system
Correct Answer
A. Basic input output systemExplanation
BIOS stands for Basic Input Output System. It is a firmware that is embedded on a computer's motherboard. BIOS is responsible for initializing and testing hardware components during the boot process, and it provides the computer with basic instructions on how to load the operating system. It also manages the communication between the operating system and the computer's hardware devices, such as the keyboard, mouse, and monitor.Rate this question:
-
- 7.
Which of the following best illustrates the default subnet mask for a class A,B, and C Network?
-
0.0.0.0, 0.0.0.1, 0.0.1.1
-
255.255.255.0, 255.255.0.0, 255.0.0.0
-
255.0.0.0, 255.255.0.0, 255.255.255.0
-
255.255.0.0, 255.255.255.0, 255.255.255.255
Correct Answer
A. 255.0.0.0, 255.255.0.0, 255.255.255.0Explanation
The default subnet mask for a class A network is 255.0.0.0, for a class B network is 255.255.0.0, and for a class C network is 255.255.255.0. These subnet masks define the network portion of an IP address and help determine which part of the IP address represents the network and which part represents the host.Rate this question:
-
- 8.
Which physical connection is the fastest?
-
twisted pair
-
coaxial cable
-
fiber-optics
-
microwaves
Correct Answer
A. fiber-opticsExplanation
Fiber-optics is the fastest physical connection because it uses light to transmit data, allowing for extremely high speeds and large bandwidth. Unlike twisted pair and coaxial cable which use electrical signals, fiber-optics can transmit data over long distances without significant loss or interference. Microwaves, although they can transmit data wirelessly, are not as fast as fiber-optics in terms of data transmission speeds.Rate this question:
-
- 9.
What can greatly reduce TCP/IP configuration problems?
-
WINS Server
-
WINS Proxy
-
DHCP Server
-
PDC
Correct Answer
A. DHCP ServerExplanation
A DHCP (Dynamic Host Configuration Protocol) server can greatly reduce TCP/IP configuration problems. DHCP automatically assigns IP addresses to devices on a network, eliminating the need for manual configuration. It also provides additional configuration settings such as subnet mask, default gateway, and DNS server addresses. By using a DHCP server, network administrators can ensure that devices are properly configured with the correct IP settings, reducing the chances of configuration errors and simplifying the management of TCP/IP configurations.Rate this question:
-
- 10.
Which command will display the assigned IP address of a network adapter installed on a Windows XP system?
-
Ipadapter/all
-
WinIP
-
Ipconfig
-
Configip
Correct Answer
A. IpconfigExplanation
The correct answer is "Ipconfig." This command is used in Windows XP systems to display the assigned IP address of a network adapter. It provides information about the network configuration, including the IP address, subnet mask, default gateway, and DNS servers. By running "Ipconfig" in the command prompt, users can quickly view the IP address assigned to their network adapter.Rate this question:
-
- 11.
POST stands for...
-
Power-On-Self-Test
-
Power-Only-Standard-Test.
-
Program-Optimum-Self-Test.
-
Program-Optimum-Starting-Time.
Correct Answer
A. Power-On-Self-TestExplanation
POST stands for Power-On-Self-Test. This is a diagnostic testing process that a computer or other electronic device goes through when it is powered on. During the POST, the device checks its hardware components to ensure they are functioning correctly. This test helps to identify any issues or errors that may prevent the device from booting up properly. The Power-On-Self-Test is an important part of the startup process and helps to ensure the device's reliability and stability.Rate this question:
-
- 12.
To boot directly into safe mode with networking, press _______.
-
F3
-
F9
-
F5
-
F8
Correct Answer
A. F5Explanation
If internet access is required, selecting 5 or pressing F5 activates Safe Mode with Networking.Rate this question:
-
- 13.
What are the latest service packs available for windows XP……….?
-
Service pack 2
-
Service pack 3
-
Service pack 4
-
Service pack 1
Correct Answer
A. Service pack 3Explanation
Windows XP originally had three service packs released by Microsoft: Service Pack 1, Service Pack 2, and Service Pack 3. Service Pack 3 is the latest service pack available for Windows XP. It was released in 2008 and includes all the updates and security enhancements from the previous service packs, as well as additional improvements and bug fixes. Therefore, the correct answer is Service pack 3.Rate this question:
-
- 14.
Lotus notes database format?
Correct Answer
nsfExplanation
The Lotus Notes database format is known as nsf.Rate this question:
- 15.
Which two are examples of wireless encryption? (Select two answers)
-
VPN
-
PPP
-
WEP
-
WPA
-
MAC
Correct Answer(s)
A. WEP
A. WPAExplanation
WEP (Wired Equivalent Privacy) and WPA (Wi-Fi Protected Access) are both examples of wireless encryption. WEP was the original encryption protocol used for securing wireless networks, but it is now considered to be weak and easily compromised. WPA, on the other hand, is a more secure encryption protocol that was introduced as a replacement for WEP. It provides better security features and is recommended for protecting wireless networks. Both WEP and WPA are used to encrypt data transmitted over wireless networks to prevent unauthorized access and protect the privacy of the users.Rate this question:
-
- 16.
Which item is an example of a physical network address?
-
IP address
-
MAC address
-
Workstation name
-
Www.proprofs.com
Correct Answer
A. MAC addressExplanation
A physical network address refers to a unique identifier assigned to a network interface card (NIC) in a computer or device. The MAC address, also known as the Media Access Control address, is a 48-bit address that is assigned to the NIC by the manufacturer. It is used to identify devices on a local network and is independent of the IP address. Therefore, the MAC address is an example of a physical network address.Rate this question:
-
- 17.
What is the standard port for HTTPS?
-
80
-
443
-
25
-
143
Correct Answer
A. 443Explanation
The standard port for HTTPS is 443. HTTP is the protocol used for transferring data over the internet, and HTTPS is a secure version of HTTP that uses encryption to protect the data being transferred. The use of port 443 ensures that the data is securely transmitted between the client and the server, preventing unauthorized access or tampering. Port 80 is the standard port for regular HTTP traffic, while ports 25 and 143 are used for SMTP (Simple Mail Transfer Protocol) and IMAP (Internet Message Access Protocol) respectively, which are protocols used for email transmission.Rate this question:
-
- 18.
The image below represents which RAID level?
-
RAID 0
-
RAID 1
-
RAID 4
-
RAID 5
-
RAID 10
Correct Answer
A. RAID 5Explanation
The image represents RAID 5 because it shows data striping across multiple disks with distributed parity. RAID 5 offers good performance and fault tolerance by distributing data and parity information across all the drives in the array. It requires at least three disks to implement and can withstand the failure of one disk without data loss.Rate this question:
-
- 19.
A hard drive has a partion which is having less space then 2 GB which file system it will support ?
-
FAT 16
-
FAT 32
-
NTFS
-
ANY ONE
Correct Answer
A. FAT 16Explanation
A hard drive with a partition having less than 2 GB of space will support the FAT 16 file system. FAT 16 is an older file system that was commonly used in early versions of Windows operating systems. It has a maximum partition size of 2 GB and can support up to 65,536 clusters. This file system is not as efficient as newer file systems like FAT 32 or NTFS, but it is still compatible with older systems and can be used for smaller partitions.Rate this question:
-
- 20.
What do service packs contain?
-
Displays graphics in addition to text when it communicates with the user
-
Security information
-
Controls access to the hardware and software on a network
-
Contain fixes and enhancements to the operating system
Correct Answer
A. Contain fixes and enhancements to the operating systemExplanation
Service packs are updates or patches that are released by software companies to fix bugs, address security vulnerabilities, and improve the performance and functionality of the operating system. These updates may include enhancements to existing features, new features, and improvements to the overall stability and reliability of the system. Therefore, the correct answer is that service packs contain fixes and enhancements to the operating system.Rate this question:
-
- 21.
A _______ is displayed whenever Windows XP needs to supply information to you or wants you to enter information or selct among several options.
-
Menu bar
-
Status bar
-
Dialog box
-
Short-cut menu
Correct Answer
A. Dialog boxExplanation
A dialog box is displayed whenever Windows XP needs to supply information to you or wants you to enter information or select among several options. It is a graphical control element that presents information to the user and allows them to interact with the system. Dialog boxes typically contain buttons, checkboxes, text fields, and other elements that allow the user to input data or make choices. They are commonly used for tasks such as saving files, changing settings, or displaying error messages.Rate this question:
-
- 22.
A _____________ is a user interface that displays graphics in addition to text when it communicates with the user.
-
User-interface
-
Graphical user interface
-
User-friendly
-
Interface
Correct Answer
A. Graphical user interfaceExplanation
A graphical user interface is a type of user interface that not only presents text but also incorporates visual elements such as icons, buttons, and images to enhance the user's interaction with the system. It provides a more visually appealing and intuitive way for users to navigate and interact with the software or application.Rate this question:
-
- 23.
You have been instructed to change the permissions for several folders and files on your clients network. Which one of the following tabs of the Properties dialog box for the file / folder would you use to assign or modify NTFS permissions? Choose one answer?
-
Advance
-
Security
-
Permissions
-
None of these
Correct Answer
A. SecurityExplanation
The correct answer is "Security." In the Properties dialog box for a file or folder, the Security tab is used to assign or modify NTFS (New Technology File System) permissions. NTFS permissions control access to files and folders on a Windows operating system, allowing or denying users and groups certain rights, such as read, write, or execute. By accessing the Security tab, you can manage and customize these permissions to ensure appropriate access levels for different users or groups.Rate this question:
-
- 24.
Which of the following is NOT a type of RAM?
-
SIMM
-
DIMM
-
ROM
-
SLIPP
Correct Answer
A. ROMExplanation
ROM stands for Read-Only Memory, which is a type of non-volatile memory that stores data permanently and cannot be modified or erased. Unlike RAM (Random Access Memory), which is a type of volatile memory that can be read from and written to, ROM is a type of memory that only allows reading operations. Therefore, ROM is not considered a type of RAM.Rate this question:
-
Quiz Review Timeline (Updated): Dec 13, 2023 +
Our quizzes are rigorously reviewed, monitored and continuously updated by our expert board to maintain accuracy, relevance, and timeliness.
-
Current Version
-
Dec 13, 2023Quiz Edited by
ProProfs Editorial Team -
Aug 28, 2012Quiz Created by
Dorfketal
Back to top