Trivia Quiz On Catia V5 : CAD Software

25 Questions | Total Attempts: 6329

SettingsSettingsSettings
Please wait...
Trivia Quiz On Catia V5 : CAD Software


Questions and Answers
  • 1. 
    Basic Catia V5: A part in Catia V5 has which suffix?
    • A. 

      *.CATPart

    • B. 

      *.Model

    • C. 

      *.Prt

    • D. 

      *.Dwg

  • 2. 
    Basic Catia V5: Is "wrench-Bonn?et_string.CATPrpduct" an acceptable filename in Catia?
    • A. 

      True

    • B. 

      False

  • 3. 
    Basic Catia V5: If you are missing a toolbar what do you do?
    • A. 

      Right-click on an icon and look for it there or check View-Toolbars

    • B. 

      Start a different module of Catia and look for it there

    • C. 

      Close and start Catia again

    • D. 

      Close the open document and open it again

  • 4. 
    Basic Catia V5: An assembly in Catia V5 has which suffix?
    • A. 

      *.Model

    • B. 

      *.CATPart

    • C. 

      *.Prt

    • D. 

      *.CATProduct

  • 5. 
    Part Design: When a new plane is created, where, in the specification tree, will it appear? (It is NOT a hybrid model) 
    • A. 

      In the Geometrical Set.1 body

    • B. 

      In the PartBody

    • C. 

      Just after the zx plane

  • 6. 
    Part Design: What is a draft feature?
    • A. 

      The function is often used when the part is going to be cast/forged/formed somehow with a tool

    • B. 

      It is a feature you can use for creating lines

    • C. 

      The function is often used within styling

    • D. 

      You can create a pad with fillets with this command

  • 7. 
    Part Design: The term "parametric" means that a solid geometry is controlled by driving dimensions.
    • A. 

      True

    • B. 

      False

  • 8. 
    • A. 

      For instance when designing complex and/or molded parts

    • B. 

      When assemble complex products

    • C. 

      When you have many surfaces

    • D. 

      When you need to create a drawing

  • 9. 
    Part Design: What is a skeleton? 
    • A. 

      Help geometry that you can use as reference

    • B. 

      A thinwalled CATIA model

    • C. 

      Skeleton is another name for a sketch

    • D. 

      Skeleton is another name for a geometrical set.

  • 10. 
    Part Design: What is true about sketch-based features? 
    • A. 

      You need at least one sketch to create them

    • B. 

      They can only be created in the PartBody (the first body)

    • C. 

      It is an isolated sketch

    • D. 

      They need a surface as parent element

  • 11. 
    • A. 

      To verify that geometry in sketch is correct

    • B. 

      To measure geometry in sketch

    • C. 

      To change geometry in sketch

    • D. 

      To change color/thickness of geometry in sketch

  • 12. 
    Sketcher: The Sketcher workbench is a standalone workbench that allows you to save a *:CATSketch file 
    • A. 

      True

    • B. 

      False

  • 13. 
    Drafting: How do you create your first view (Front view)?
    • A. 

      Pick front view icon and pick a plane in the 3D viewer, Part or Assembly

    • B. 

      Copy the object from assembly or part and paste it on the drawing

    • C. 

      Pick a plane on object and right click choose in menu Front view

    • D. 

      Drag the part or assembly into the drawing sheet

  • 14. 
    Drafting: How do you see which drawing view is active?
    • A. 

      The active view has a red frame

    • B. 

      All views are active!

    • C. 

      Only the active view is visible

  • 15. 
    Drafting: When you create an exploded view you usually use a tool called Enhanced Scene. Why?
    • A. 

      You can create an exploded view which doesn't affect the "master" product

    • B. 

      You can create position balloons there

    • C. 

      You can create a Bill of material list there

    • D. 

      You can create an animated movie there

  • 16. 
    Drafting: In a detailed drawing are the views dependant of the CATParts point of origin?
    • A. 

      True

    • B. 

      False

  • 17. 
    Assembly Design: When analyzing a component Catia says it has 6 "degrees of freedom". What is the meaning of that?
    • A. 

      It means that the component is fully loose in space

    • B. 

      It means that the component is fully fixed in space

    • C. 

      It means that the component is not saved

    • D. 

      It means that the component is drafted with an angle of 6-degrees

  • 18. 
    Assembly Design: What is the name of the command that makes it possible to create an exploded view?
    • A. 

      Enhanced Scene

    • B. 

      3D split

    • C. 

      Move

    • D. 

      Assembly split

  • 19. 
    • A. 

      When you want to join two or more surfaces or curves

    • B. 

      When you want to join a solid body to a surface

    • C. 

      When I need to connect a sketch to a surface

    • D. 

      When I want to join a point to a curve

  • 20. 
    Surface Design: What is an isolated element? 
    • A. 

      Element without a history, it has no relation to a parent element

    • B. 

      Element with a fixed color

    • C. 

      Element you only use in Part Design

    • D. 

      Element with a specific history, you can only change the length parameter

  • 21. 
    Surface Design: Is there a command to create a new surface from an existing surface with a fixed offset value? 
    • A. 

      Yes, just use "Offset" command in surface design

    • B. 

      No, you must create this type of feature within solid design

    • C. 

      No, you must create a new surface from new curves

    • D. 

      Yes, just use "fixed Value" command in surface design

  • 22. 
    Basic Catia V5: What does the F3-button do? 
    • A. 

      Hide tree

    • B. 

      Bring up Help

    • C. 

      Show last part

    • D. 

      Open Sketcher

  • 23. 
    Basic Catia V5: What does the F1-button do? 
    • A. 

      Bring up help

    • B. 

      Hide toolbars

    • C. 

      Open Sketcher

    • D. 

      Close open window

  • 24. 
    Basic Catia V5: How do you keep an icon active after use?  
    • A. 

      By double-clicking on the icon

    • B. 

      By holding control when clicking the icon

    • C. 

      By holding shift when clicking the icon

    • D. 

      By right-clicking on the icon and select reuse

  • 25. 
    Basic Catia V5: How can you see in which release and service pack level a part have been created? 
    • A. 

      Edit + Links

    • B. 

      File + Document properties

    • C. 

      Help + About