# Quiz To Test Catia Fundamentals

Approved & Edited by ProProfs Editorial Team
The editorial team at ProProfs Quizzes consists of a select group of subject experts, trivia writers, and quiz masters who have authored over 10,000 quizzes taken by more than 100 million users. This team includes our in-house seasoned quiz moderators and subject matter experts. Our editorial experts, spread across the world, are rigorously trained using our comprehensive guidelines to ensure that you receive the highest quality quizzes.
| By Bkswapnil
B
Bkswapnil
Community Contributor
Quizzes Created: 1 | Total Attempts: 2,206
Questions: 10 | Attempts: 2,207

Settings

The CATIA V5Fundamentals course is designed to provide delegates with a broad skill set for using CATIA V5. It impacts knowledge gained for many more specialized training courses. The quiz below is designed to help us test our understanding on said fundamentals. Take it up and see what you didn’t understand fully.

• 1.

### What is the colour of under-constrained elements in CATIA Sketcher

• A.

White

• B.

Green

• C.

Magenta

• D.

Yellow

A. White
Explanation
Under-constrained elements in CATIA Sketcher are displayed in the color white. This color is used to indicate that the elements do not have enough constraints to fully define their position or size. By being white, these elements stand out from the rest of the sketch, making it easier for the user to identify and apply the necessary constraints to properly define them.

Rate this question:

• 2.

### Which is not a conic section

• A.

Ellipse

• B.

Spline

• C.

Parabola

• D.

Hyperbola

B. Spline
Explanation
A spline is not a conic section because it is a curve that is defined by a set of control points, rather than by the intersection of a plane and a cone. Conic sections, on the other hand, are formed by the intersection of a plane with a cone. Ellipse, parabola, and hyperbola are all examples of conic sections.

Rate this question:

• 3.

### Which is this toolbar

• A.

Surfaces

• B.

Operations

• C.

Wireframe

• D.

Profile

B. Operations
Explanation
The correct answer is "operations." The question is asking for the name of a toolbar, and out of the given options, "operations" is the most appropriate choice. The other options, such as "surfaces," "wireframe," and "profile," do not typically refer to toolbars in the context of computer software. "Operations" is a common term used to describe a toolbar that contains various functions and tools for performing operations or actions within a software program.

Rate this question:

• 4.

### To give dimension which tool is used in sketcher

• A.

Animate constraint

• B.

Dimensions

• C.

Constraint

• D.

Measure

C. Constraint
Explanation
In sketching, constraints are used to define and control the relationships between different elements. They help in maintaining the desired shape and size of the sketch. By applying constraints, the user can specify the exact dimensions and angles of the sketch. Therefore, using constraints is the correct tool to give dimension in sketcher.

Rate this question:

• 5.

### To toggle display of specifications tree which function key is used

• A.

F10

• B.

F2

• C.

F3

• D.

F5

C. F3
Explanation
Pressing the F3 key is used to toggle the display of the specifications tree.

Rate this question:

• 6.

### What is the default primary spacing for grid

• A.

10 mm

• B.

100 mm

• C.

10 m

• D.

100 m

B. 100 mm
Explanation
The default primary spacing for grid is 100 mm.

Rate this question:

• 7.

### How to draw construction element

• A.

Use sketch tools toolbar

• B.

Draw entities & change linetype

• C.

Draw axis

• D.

Draw profile

A. Use sketch tools toolbar
Explanation
The correct answer is to use the sketch tools toolbar. This toolbar provides various tools and options that allow users to easily draw construction elements. These tools may include options to draw lines, circles, rectangles, and other shapes. By utilizing the sketch tools toolbar, users can efficiently create and modify construction elements according to their needs.

Rate this question:

• 8.

### Which is not a law type

• A.

Linear

• B.

S type

• C.

• D.

Circular

D. Circular
Explanation
Circular is not a law type because it does not describe a specific type of law. Linear, S type, and Advanced are all types of laws that have specific characteristics or functions associated with them. However, circular does not have any specific meaning in the context of law and therefore cannot be considered a law type.

Rate this question:

• 9.

### Which is this tool bar

• A.

Product Structure Tools

• B.

Assembly Features

• C.

Constraints

• D.

Move

A. Product Structure Tools
Explanation
The correct answer is "Product Structure Tools". This tool bar is likely a feature in a software program or application that allows users to organize and manage the structure of a product. It may include tools for creating, editing, and arranging components or parts within a product assembly. This tool bar could be useful for engineers or designers working on complex product designs, as it provides a convenient way to visually represent and manipulate the structure of a product.

Rate this question:

• 10.

### Formula tool is available in which toolbar

• A.

Tools

• B.

Knowledge

• C.

View

• D.

Standard

B. Knowledge
Explanation
The correct answer is "Knowledge". The formula tool is available in the "Knowledge" toolbar.

Rate this question:

Quiz Review Timeline +

Our quizzes are rigorously reviewed, monitored and continuously updated by our expert board to maintain accuracy, relevance, and timeliness.

• Current Version
• Mar 21, 2023
Quiz Edited by
ProProfs Editorial Team
• Apr 17, 2013
Quiz Created by
Bkswapnil

Related Topics