2A672 EOC Pretest

100 Questions | Attempts: 1434
Share

SettingsSettingsSettings
2A672 Quizzes & Trivia

By taking this test, you will prepare yourself prior to your 2A672 EOC.


Questions and Answers
  • 1. 

    What A/M32A -86D generator sets circuit provides initial rotation of the engine for starting the unit?

    • A.

      Idle/run

    • B.

      Generator build-up

    • C.

      Start

    • D.

      Overspeed

    Correct Answer
    C. Start
  • 2. 

    The oppostion of a capacitor to changes in voltage in an AC circuit is capactive

    • A.

      Resistance

    • B.

      Reactance

    • C.

      Resonance

    • D.

      Polarity

    Correct Answer
    B. Reactance
  • 3. 

    An inductor stores energy in the form of a(n)

    • A.

      Magnetic field

    • B.

      Power surge

    • C.

      Voltage drop

    • D.

      Open circuit

    Correct Answer
    A. Magnetic field
  • 4. 

    Hot, expanding gases from the GTC turbine section's combustor can are accelerated and directed into the nozzle ring by the

    • A.

      Turbine wheel

    • B.

      Combustor cap

    • C.

      Torus assembly

    • D.

      Exhaust flange

    Correct Answer
    C. Torus assembly
  • 5. 

    The spring tension on the GTC's governor is set for loaded governor speed _________ percent.

    Correct Answer
    100%
  • 6. 

    If an air conditioneris short cycling, you should check the

    • A.

      Receiver outlet valve

    • B.

      Setting of the LPCO

    • C.

      Heat load

    • D.

      Refrigerant, and drain off part of it

    Correct Answer
    A. Receiver outlet valve
  • 7. 

    The main purpose of the Hydraulic Test Stands supply system is

    • A.

      Supply hydraulic fluid to the aircraft

    • B.

      Store hydraulic fluid until needed by the test stand

    • C.

      Fill the lines and components with hydraulic fluid

    • D.

      Supply a continuos flow of fluid uner pressure to the high pressure pump

    Correct Answer
    B. Store hydraulic fluid until needed by the test stand
  • 8. 

    Pressure output of the MJ-1B's hand pump varies from 0 to _____ psi.

    Correct Answer
    1500
  • 9. 

    On a GTC you will see grayish white smoke coming out of the exhaust box if the ________ are defective.

    • A.

      Interstage seals

    • B.

      Turbine engine oil leaks

    • C.

      Inducers

    • D.

      Stationary divergent shaped blades

    Correct Answer
    B. Turbine engine oil leaks
  • 10. 

    The bomblift's ______ aids in starting the unit or when the engine is running rough due to vapor locks.

    • A.

      Preheat solenoid

    • B.

      Electric fuel pump switch

    • C.

      Ammeter

    • D.

      Starter solenoid

    Correct Answer
    B. Electric fuel pump switch
  • 11. 

    True power is monitored by using a

    • A.

      Voltmeter

    • B.

      Ohmmeter

    • C.

      Watt meter

    • D.

      Multimeter

    Correct Answer
    C. Watt meter
  • 12. 

    In AC operation, the capacitor fully discharges at the same time the voltage drops to

    • A.

      63%

    • B.

      37%

    • C.

      Zero

    • D.

      One TC

    Correct Answer
    C. Zero
  • 13. 

    A fully charged capacitor requires _________  RC times constant.

    • A.

      3

    • B.

      5

    • C.

      7

    • D.

      10

    Correct Answer
    B. 5
  • 14. 

    The DC voltage supplied to the A/M32A-86D generator set's exciter field is controlled by the __________ circuit.

    • A.

      Generator output

    • B.

      Load

    • C.

      Automatic field control

    • D.

      Manual field control

    Correct Answer
    C. Automatic field control
  • 15. 

    In a schematic, if the arrow in a bipolar transistor is pointing away from the base, we have a ____________ transistor.

    • A.

      PNP

    • B.

      NPN

    • C.

      N-type

    • D.

      P-type

    Correct Answer
    B. NPN
  • 16. 

    When a magnetic field induces voltage into a coiled conductor that opposes the original current, the process is referred to as

    • A.

      Self-induction

    • B.

      Resistance

    • C.

      Pulsation

    • D.

      Mutual inductance

    Correct Answer
    A. Self-induction
  • 17. 

    Excess oil is drawn from the gear case in the lubrication system of the -60A generator by the

    • A.

      Oil jet assembly

    • B.

      Main oil pump

    • C.

      Oil cooler

    • D.

      Scavenge pump

    Correct Answer
    D. Scavenge pump
  • 18. 

    The amount of current required to gate the SCR is called

    • A.

      Avalanche breakdown point

    • B.

      Barrier voltage

    • C.

      120 ripples

    • D.

      Forward breakover voltage

    Correct Answer
    D. Forward breakover voltage
  • 19. 

    The ES establishes a maximum allowable one-time repair expenditure limit for each piece of equipment they manage costing over

    • A.

      $1500

    • B.

      $2000

    • C.

      $2500

    • D.

      $3000

    Correct Answer
    C. $2500
  • 20. 

    Air + moisture vapor + quantity of air + temperature difference =

    • A.

      Heat

    • B.

      Heat load

    • C.

      CFM

    • D.

      PPM

    Correct Answer
    B. Heat load
  • 21. 

    Varying the emitter-base current through a transistor varies the

    • A.

      Forward breakover voltage

    • B.

      Barrier voltage

    • C.

      Voltage to the load

    • D.

      Amplification

    Correct Answer
    C. Voltage to the load
  • 22. 

    Procedures and standards for authenticating, controlling, procuring, and producing Air Force publications is the responsibilty of the

    • A.

      Commanders

    • B.

      Director of Information Management

    • C.

      MAJCOM

    • D.

      Chief of Staff, USAF

    Correct Answer
    B. Director of Information Management
  • 23. 

    The movement of the bomblift's cradle assmbly is controlled by the ___________ system.

    • A.

      Lift

    • B.

      Power steering

    • C.

      Hydrostatic drive

    • D.

      Hand pump

    Correct Answer
    A. Lift
  • 24. 

    When appealing the findings of a report of survey, the appeal must be submitted to the approving authority within _______ days of the date the individual is notified of the assessed liability.

    • A.

      3

    • B.

      10

    • C.

      15

    • D.

      30

    Correct Answer
    D. 30
  • 25. 

    Among the most common MPTO's is TO ________, which explains the TO system and methods to improve TO's.

    • A.

      00-20-3

    • B.

      00-5-1

    • C.

      00-20-7

    • D.

      00-5-2

    Correct Answer
    B. 00-5-1
  • 26. 

    To determine if a deficiency meets criteria for the deficiency reporting system, use

    • A.

      TO 00-20-54

    • B.

      TO 00-35D-54

    • C.

      TO 00-25-172

    • D.

      AFI 91-202

    Correct Answer
    B. TO 00-35D-54
  • 27. 

    Only when you are performing resistive and reactive load tests at the same time is a(n) __________________ used.

    • A.

      Voltmeter

    • B.

      Ohmmeter

    • C.

      Multimeter

    • D.

      Power factor meter

    Correct Answer
    D. Power factor meter
  • 28. 

    One of the most significant things that can be done to reduce the heat load in an air conditioner is to

    • A.

      Recycle the conditioned air

    • B.

      Increase the pressure

    • C.

      Recharge the system

    • D.

      Cool the air

    Correct Answer
    A. Recycle the conditioned air
  • 29. 

    The flow of positive charges against the flow of electrons in semiconductor is called the

    • A.

      Valence

    • B.

      Covalence

    • C.

      Hole current

    • D.

      Electron voltage

    Correct Answer
    C. Hole current
  • 30. 

    Items that are not repairable at this station, are condemned and require turn-in, are covered under TO

    • A.

      00-20-7

    • B.

      00-5-1

    • C.

      00-20-14

    • D.

      00-20-3

    Correct Answer
    D. 00-20-3
  • 31. 

    On a SGNSC after the engine has warmed up the oil pressure gauge should read

    • A.

      25-38 psi

    • B.

      10-21 psi

    • C.

      43-57 psi

    • D.

      13-19 psi

    Correct Answer
    C. 43-57 psi
  • 32. 

    If a generator is overhauled, it is automatically considered to be _______________ years old at the time the overhaul is complete.

    • A.

      2

    • B.

      3

    • C.

      4

    • D.

      5

    Correct Answer
    A. 2
  • 33. 

    Use the aircraft servicing load bank circuit to test the performance of 28 VDC genertors under simulated load.

    • A.

      True

    • B.

      False

    Correct Answer
    A. True
  • 34. 

    Heat transfers from hot to cold, and the transfer continues until

    • A.

      The formerly hot substance freezes.

    • B.

      The formerly cold substance melts.

    • C.

      Both substances are at the same temperature.

    • D.

      Once substance is 10 degrees warmer than the other.

    Correct Answer
    C. Both substances are at the same temperature.
  • 35. 

    Capacitors are used as a blocking device to block DC or in a filter to pass or reject a specific frequency.

    • A.

      True

    • B.

      False

    Correct Answer
    A. True
  • 36. 

    In order to make a silicon crystal conduct, material is added to it which contains _____________  valence electrons.

    • A.

      1 or 3

    • B.

      2 or 4

    • C.

      3 or 5

    • D.

      2 or 6

    Correct Answer
    C. 3 or 5
  • 37. 

    The boiling process in an air conditioner can only be controlled and regulated by controlling the _______________ applied to the refrigerant

    • A.

      Heat

    • B.

      Recycling

    • C.

      Pressure

    • D.

      Water

    Correct Answer
    C. Pressure
  • 38. 

    Informational publications which normally are "how to" documents are

    • A.

      AFPAMs.

    • B.

      AFINDs.

    • C.

      AFIs.

    • D.

      AFSs.

    Correct Answer
    A. AFPAMs.
  • 39. 

    As air flows across the coils of an air conditioner's ________________, heat transfers from the refrigerant to the ambient air and is exhausted out the top of the unit.

    • A.

      Oil seperator

    • B.

      Condensor assembly

    • C.

      Temperature controller

    • D.

      Compressor

    Correct Answer
    B. Condensor assembly
  • 40. 

    Apparent power is measure in

    • A.

      KWAs

    • B.

      KWs

    • C.

      KVAs

    • D.

      KVs

    Correct Answer
    C. KVAs
  • 41. 

    The bomblift's power steering pump is driven by the

    • A.

      Coupling off the transmission pump

    • B.

      Shaft driven off the engine

    • C.

      Flexible coupling off the engine

    • D.

      Belt driven off the system pump

    Correct Answer
    A. Coupling off the transmission pump
  • 42. 

    On the EPU-6/E how does the operator know if CB1 is turned on

    • A.

      Audible alarm

    • B.

      Frequency meter

    • C.

      Hourmeter

    • D.

      Indicator light

    Correct Answer
    D. Indicator light
  • 43. 

    In the -60A generator set's bleed air system, the opening time is controlled by the load control valve's _______________ section.

    • A.

      Diaphragm

    • B.

      Load

    • C.

      Rate

    • D.

      Mechanical linkage

    Correct Answer
    C. Rate
  • 44. 

    If a GTC is experiencing hot starts, the 1st component you would check is the ____________ valve.

    • A.

      Plenum drain

    • B.

      Load control

    • C.

      Filter drain

    • D.

      Switcher

    Correct Answer
    A. Plenum drain
  • 45. 

    In an air conditioner, the oil safety switch, low pressure cutout switch, and the high pressure cutout switch operate by shutting of the

    • A.

      Blower assembly

    • B.

      Fan cycle switch

    • C.

      Fuel heater relay

    • D.

      Compressor clutch

    Correct Answer
    D. Compressor clutch
  • 46. 

    The temperature of a gas changes because of ______ heat.

    • A.

      Latent

    • B.

      Sensible

    • C.

      Convection

    • D.

      Super

    Correct Answer
    D. Super
  • 47. 

    The GTC is protected from damage by the

    • A.

      Impellers

    • B.

      Inducers

    • C.

      Interstage ducts

    • D.

      Interstage seals

    Correct Answer
    D. Interstage seals
  • 48. 

    In a series-parallel cicuits, no matter what the individual branch currents are, the total current of all parallel branches always equals the current flow in the  ________________________  of the circuit.

    • A.

      Parallel part

    • B.

      Resistors

    • C.

      Series part

    • D.

      Combined parts

    Correct Answer
    C. Series part
  • 49. 

    The heat used to change a solid to a liquid is referred to as

    • A.

      Super heat

    • B.

      Latent heat of vaporization

    • C.

      Sensible heat

    • D.

      Latent heat of fusion

    Correct Answer
    D. Latent heat of fusion
  • 50. 

    The silicon atom's valance band contains ____________ electrons and is classified as an intrinsic semiconductor.

    • A.

      4

    • B.

      6

    • C.

      8

    • D.

      12

    Correct Answer
    A. 4

Quiz Review Timeline +

Our quizzes are rigorously reviewed, monitored and continuously updated by our expert board to maintain accuracy, relevance, and timeliness.

  • Current Version
  • Feb 19, 2013
    Quiz Edited by
    ProProfs Editorial Team
  • Jun 11, 2012
    Quiz Created by
    Christan8481
Back to Top Back to top
Advertisement
×

Wait!
Here's an interesting quiz for you.

We have other quizzes matching your interest.