2a533a Vol.1
Settings
Preperation quiz for comm/nav mission sys journeyman.
- 1.The Air Force TO numbering system is explained in detail in TO
- A.
00-5-18
- B.
0-4-2
- C.
0-1-01
- 2.The first group of characters in Air Force TO number 33D7-10-1 identifies the
- A.
Specific item of equipment
- B.
Equipment's major system
- C.
Sectioin of a sectionalized TO
- 3.The fourth group of characters in Air Force TO number 1B-1B-2-6 identifies the
- A.
Section of a sectionalized TO
- B.
Kind of TO
- C.
Specific item of equipement
- 4.The JG in Air Force TO number 1c-141B-2-9JG-10 indicates the
- A.
Specific type of equipment
- B.
Specific model or series of TOs
- C.
Fuctional indicator of the TO
- 5.In the AIr Force TO system, what TO lists all TO indexes?
- A.
0-1-cd-1
- B.
0-1-cd-1-1
- C.
01-cd-01
- 6.In the Air Force TO sysytem, what index TO contains a cross-reference listing of data code numbers assigned to active TCTOs?
- A.
0-4-1
- B.
0-4-2
- C.
00-5-1
- 7.What type of Air Force TO do you use to locate all of the TOs pertainin to a certain type of equipment?
- A.
Alaphabetical index
- B.
Cross-reference tables
- C.
List of applicable publications
- 8.Air Force technical manuals that contain data for the operation and servicing of aircraft equpment are called
- A.
Other equipment TOs
- B.
Commercial manuals
- C.
Job guides
- 9.Publications that contain instructions for use of equipment, in addition to data contained in other manuals, are identified as
- A.
COTS manuals
- B.
Supplemental manuals
- C.
Other equipment technical orders
- 10.In the Air Force , COTS technical manuals are normally identified by an
- A.
Equipment manufacturer ID#
- B.
Assigned technical order number
- C.
Air Force stock number
- 11.What Air Force technical order is not a type of TCTO?
- A.
Interim
- B.
Urgent action
- C.
Emergency
- 12.What type of TCTO is used to correct conditions that could result in fatal or serious injury?
- A.
Urgent
- B.
Immediate
- C.
Emergency
- 13.What types of TCTO can be identified by red Xs or circled red Xs, respectively, alterntely spaced around the border?
- A.
Emergency and immediate
- B.
Immediate and urgent
- C.
Routine and emergency
- 14.The TO that lists all Air Force MPTO is TO
- A.
0-1-1
- B.
0-1-02
- C.
00-1-02
- 15.What type of number identifies a prelimiary TO?
- A.
Sequential copy number
- B.
Change number
- C.
Supplement number
- 16.Where are change pages inserted in existing TOs?
- A.
After the last page of the TO
- B.
Before the page of the same number
- C.
In place of the page of the same number
- 17.The authorized types of TO supplemtns are
- A.
Routine, safety , and operational
- B.
Routine safety and formal
- C.
Interim, safety, and operational
- 18.Which statement best describes TOPS?
- A.
Unlike standard TO supplements, TOPS do not include a title pg
- B.
TOPS can be issued when the time factor prevents issuing a standard change
- C.
Like standard TO supplements, TOPS replace out dated TO pages
- 19.In basic TO, how are the pages of an appendix filed?
- A.
After the last page of TO
- B.
In front o fthe title page of the TO
- C.
In page number sequence throughout the TO
- 20.TO revisions
- A.
Do not include a replacement for the title pg
- B.
Are issued when 50% of the original TO is affected
- C.
Replace the orignal TO, including all changes and appendices
- 21.What is used to submit recomendations for TO improvements?
- A.
TO index
- B.
AF Form 1000
- C.
AFTO form 22
- 22.The Air Force To that gives detailed instructions for preparing and submitting and AFTO Form 22 is
- A.
00-5-1
- B.
00-5-15
- C.
00-20 series
- 23.The types of TO improvement reports are
- A.
Emergency and urgent
- B.
Immediate and urgent
- C.
Emergency, urgent, and routine
- 24.What does the -003 in s/s/sn 34-11-10-003 identify?
- A.
SRU ID
- B.
LRU ID
- C.
FUnctional procedure
- 25.When the fifth element of a s/s/sn is -3 the type of component procedure indicated is
- A.
Repair
- B.
Inspection
- C.
Installation
- 26.What does the alapha code in reference designator 3231FC01 identity?
- A.
Sub-system
- B.
Componet type
- C.
Diagram reference
- 27.An omms general system manual provides
- A.
A general overview of the aircraft
- B.
Detailed schematic of systems wiring
- C.
Fault descriptions and fault isolations procedures
- 28.An omms job guide manual includes
- A.
General systems theory
- B.
Output conditions pages
- C.
Functional maintenance procedures
- 29.In the omms job guide, what type of procedure is component adjustment/alignment?
- A.
Functional maintenance
- B.
General maintenance
- C.
Functional fault isolation
- 30.An omms fault reporting manual provides
- A.
Detailed schematics of the systems wiring
- B.
A means of conveying fault information
- C.
Fault descriptions and fault isolation procedures
- 31.In the fault code 32-41-19-001-2, the 01 identifies a faulty
- A.
Sru
- B.
Lru
- C.
Sub-system
- 32.Section I of the IPB provides informatuion on use of codes and designations found in the TO and
- A.
A list of related TO
- B.
A tqable of contents for the IPB
- C.
Cross-referenced information on related supply publications
- 33.The introduction to section 1 of the IPB provides the user the capability of cross-referencing
- A.
Part number and reference designators
- B.
Part numbers and figures
- C.
Reference designators and index numbers
- 34.WHat column of section II of the IPBV contains the letters NAS?
- A.
Usable on code
- B.
Federal supply code for manufacturers
- C.
Part number
- 35.SEction IV of the IPB provides information for cross-referencing
- A.
Figure , index number, and part number
- B.
Figure, index number, and usable on code
- C.
Vendor's code, figure and IPB index number
- 36.The data system used to assign and control computer program identification numbers is the
- A.
IMDS
- B.
CAMS
- C.
ACPINS
- 37.The ACPINS provides a standarized system that does not
- A.
Manage software
- B.
Develop software
- C.
Identify software
- 38.What is not a responsibility fo the CPIN system management office?
- A.
Overall maintenance
- B.
Foreign military sales development
- C.
Foreign military sales case verification
- 39.USAF customers must establish CPIN requirments through
- A.
TO distrubution offices
- B.
Adminstrative contract officers
- C.
DoD contractors
- 40.Which ACPINS major function is used to deny unauthorized requests?
- A.
Distribution
- B.
Requirements
- C.
Data entry and database maintenance
- 41.How many seperate componets may a CPIN have?
- A.
1
- B.
2
- C.
3
- 42.A CPIN is composed of how many identifier fields?
- A.
3
- B.
4
- C.
6
- 43.In the CPIN identifier, the first field consists of
- A.
Software-type codes
- B.
Subsystem and system codes
- C.
Category and major function
- 44.There are how many general types of ACPINS compendiums?
- A.
3
- B.
4
- C.
5
- 45.An ACPINS cross-reference compendium contains
- A.
Quick reference for research aids
- B.
Command-managed computer program identification numbers
- C.
Computer software configuration item assign to major equipments
- 46.The Air Force instruction that governs teh current wing organization and operation is
- A.
39-1
- B.
21-166
- C.
21-101
- 47.What factor gives Air Force wings, squadrons, and units the capability of fighting from main bases or base bones forward operation locations at any level of combat?
- A.
Centralization
- B.
Decentralization
- C.
Dispersed flying units
- 48.Promoting unit self-sufficiency through the effective use of maintenance resources is the resposibility of the
- A.
Wing commander
- B.
Maintenace group commander
- C.
Maintenance operations officer
- 49.Monitoring and supporting the flight line maintenance effort is the responsibility of the
- A.
Wing operations center
- B.
Maintenace group commander
- C.
Maintenace operation center
- 50.What is a responsibility of the maintenace operations center?
- A.
Ensure QA guidelines are being followed
- B.
Notify appropriate agencies of severe weather warnings
- C.
Review the guidance provided by the LG commander on cross functional areas
- 51.The MXG exists to
- A.
Support the QA program
- B.
Train and manage all personnel on base
- C.
Create and support the sortie producing
- 52.Whose primary role is it to increase reliability and maintainability of aircraft and support equipment?
- A.
Qa
- B.
Wing operations center
- C.
Mxs commander
- 53.The QAP is an assessment system used to
- A.
Maintain aircraft sortie rates
- B.
Monitor and report the status of electronic countermeasures and sensor pods
- C.
Determine aircraft and equipment condition, and personal proficency
- 54.What flight in the MXS support the field assistance support team for calibration?
- A.
TMDE
- B.
AVIONICS
- C.
ARMAMENT MAINTENANCE
- 55.What publication contains broad, enduring guidance for preparing and employing AF resources?
- A.
AF policy directives
- B.
AF doctrine documents
- C.
Mission directives
- 56.What are AF policy directives?
- A.
Orders of the secetary of the AF to initiate, govern, or regulate actions of conduct by AF activities at any level
- B.
1
- C.
2
- 57.Statements of the office of the secretary of the Air Force and HQ USAF used to initiate, govern, or regulate actions are called
- A.
AF manuals
- B.
AF instructions
- C.
AF policy directives
- 58.What documents consit of procedures that usually contain examples for performin standard tasks?
- A.
AF manuals
- B.
AF instructions
- C.
AF policy directives
- 59.Informational publications that include procedures for implementing AF policies are called
- A.
Indexes
- B.
Pamphlets
- C.
Directories
- 60.Informational publications that are compilatins of systematically arranged information are called
- A.
Supplements
- B.
Directories
- C.
Indexes
- 61.Who uses MDC system information for validating man power requirements?
- A.
HQ USAF
- B.
HQ ACC
- C.
HQ AMC
- 62.Which type of MDC system data is not used at base level?
- A.
Productions credit info
- B.
Analysis of NRTS actions
- C.
Determination of cost of military works hours
- 63.What is the primary source of information for equipment configuration status at base, command and depot levels?
- A.
Advanced configuration managemant system
- B.
MDC system
- C.
IMDS
- 64.The REMIS is designed to provide information to support AF
- A.
Equipment maintenace program
- B.
Data for DDN
- C.
Data for IMDS
- 65.The MDC system data element used to tie together all maintenace actions an a specific job is the
- A.
WUC
- B.
WCE
- C.
JCN
- 66.The first five digits of a JCN indicate the
- A.
Year and julian date
- B.
Last five of the equipment serial number
- C.
Month and year the maintenace discrepancy was discovered
- 67.A work cent that contributes labor towards a maintenance requirement is called the
- A.
Owning work center
- B.
Reporting work center
- C.
Performing work center
- 68.What MDC sytem data element is published in manuals and REMIS tables for each weapon and support system?
- A.
WUC
- B.
WCE
- C.
JCN
- 69.What form is used for MDC when the IMDS is not available?
- A.
AF form 2005
- B.
AF form 2413
- C.
AFTO form 349
- 70.The number entered in the TAG number block of anAFTO form 349 comes from
- A.
The AFTO form 350
- B.
A wuc manual
- C.
The ipb
- 71.Where do you find the code to enter in the TYPE MAINT block of an AFTO from 349?
- A.
On the manufacturers data plate
- B.
in the system WUC manual
- C.
On AF form 2413
- 72.What is entered in column C of an AFTO from 349 to document a TCTO?
- A.
The wuc
- B.
The tcto supprot general code
- C.
The first five characters of the TCTO data code or command-assigned data code
- 73.The entry in the CAT LAB block on an AFTO Form 349 indicates the
- A.
Rank/rating of the technician
- B.
Type of man-our expenditure
- C.
Number of technicians performing the work
- 74.An X placed in the SCH CODE BLOCK of an AFTO form 349 indicates
- A.
Additional maintenace must be scheduled
- B.
The maintance action has been rescheduled
- C.
The computer must calculate the next calibration or maintenace due date.
- 75.Which form provides an interfce between on and off equipment maintenance documentation, and serves as an identification and status tag?
- A.
Af form 2005
- B.
Af form 2413
- C.
AFTO form 350
- 76.What AFTO form is used as an accountability document for items managed under the DIFM program?
- A.
244
- B.
349
- C.
350
- 77.Dates entered on an AFTO from 350 the pertain to repair cycle times are used
- A.
As an aid in determining spares requirements
- B.
To identify time-change requirements
- C.
For establishing equipment need dates
- 78.What is entered in block 15 of an AFTO form 350 if an item is not repairable?
- A.
A description of the malfuntion
- B.
The letters NRTS and the not repairable this station code.
- C.
A brief description of the repair efforts
- 79.Who can give authorization for an aircraft to be flown while uner a red X condition?
- A.
No one
- B.
Base commander
- C.
Wing commander
- 80.The symbol you enter on ispection forms when an urgent-action TCTO is recieved is a
- A.
RED X
- B.
RED DASH
- C.
RED DIAGONAL
- 81.The IMDS is a
- A.
Base-level computer system used for supply management
- B.
Base-level computer system used for maintenace management
- C.
Command-level computer system used for maintenace management
- 82.Correcting erroneous data in the IMDS is a function of
- A.
Data reporting
- B.
Information retrieval
- C.
Database management
- 83.The IMDS is event oriented and user friendly, which means it
- A.
Accepts any input
- B.
Restricts unauthorized access
- C.
Checks keyword entries for compatibility
- 84.The primary purpose of the IMDS screen 380 is to
- A.
Provide an up-to-date list all open JCN
- B.
Provide an opportunity to modify entries found to be in error
- C.
Maintain the present data and status of yr/event id's and work center events
- 85.What IMDS screen displays a maintenace snapshot inquiry?
- A.
054
- B.
122
- C.
380
- 86.What is not a function of the G081 automated maintenace information system?
- A.
Mission scheduling
- B.
Personal leave scheduling
- C.
Personal training management
- 87.Of the four types of programs used in the G081 automated maintenace information system, which is considered to be the "heart" of the system?
- A.
Variable information retrieval
- B.
Data output
- C.
Data input
- 88.Users of the G081 automated maintenace information system know they re logged out when they see on the computer screen the word
- A.
BYE
- B.
END
- C.
MOBILITY
- 89.Supply discipline is best described as
- A.
Protection given to AF resources
- B.
Instructions given to protect AF resources
- C.
Extra consideration to get the most form availble resources
- 90.Whos is accountable for equipment items?
- A.
Supply personnel and equipment custodians
- B.
Maintenace personnel and resources advisors
- C.
Equipment manufactuors and supply personnel
- 91.What supply printout provides the user a list of all parts ordered, but not recieved?
- A.
Custodian authorization and custody receipt listing
- B.
Daily document register
- C.
Due-out validation listing
- 92.What type of property responsibility re1quires that directives and instructions be issued?
- A.
Custodial
- B.
Command
- C.
Supervisory
- 93.What type of propety responsibilty is applicable when a sergeant takes possession of a box that fell off an AF supply truck?
- A.
Custodial
- B.
Command
- C.
Supervisory
- 94.One way you can be relieved of property responsibilty is to
- A.
Have the property declared unserviceable
- B.
Turn the property into supply
- C.
Call the bse equipment management office
- 95.When a person responsible for property is transferred, and the property remains with the organization property responsibility
- A.
Stays in the organization
- B.
Remain with the person
- C.
Is transferred to the supply squadron
- 96.Unit nonexpendable equipmetn authorizations are based on
- A.
Requirements and funding
- B.
Mission and redily available equipment
- C.
Unit mission and number of personnel authorized
- 97.THe on-hand quantity of bench stock items does not normally exceed
- A.
30 days
- B.
60 days
- C.
90 days
- 98.Material deficiency reporting procedures are found in Air Force TO
- A.
00-25D-54
- B.
00-25D-55
- C.
00-35D-54
- 99.The originator sends a draft DR for screening to
- A.
Base supply
- B.
The screening point
- C.
The depot from which the item came
- 100.What type of DR requires submission by message within three workdays after the discovery of the deficiency?
- A.
Category II
- B.
Category I
- C.
Software
Back to top