2015 -- DRIVE TRAIN OPERATIONS FIRE

Questions

Feedback

During the Quiz End of Quiz

Difficulty

Easy First Hard First Sequential

Share on Facebook Share on Twitter Share on Whatsapp Share on Pinterest Share on Email Copy to Clipboard Embed on your website

1/19 Questions

Who do you take instructions from in regards to Evacuating the building?
- Other Security Officers
- John Deere Supervisor/Manager or Fire Brigade Leader
- Any John Deere Employees
- Anybody

About This Quiz

This quiz will test your knowledge on the policy and procedure for Fire Emergencies for John Deere/Waterloo Works.
Officers may use all resources available to them.
This quiz contains: multiple choice, fill in the blank and true/false questions.

2015 -- Drive Train Operations Fire - Quiz

2.

DTO Security should contact Gate 9 Security and inform them to stop all incoming vehicle traffic to DTO/SPO Facilities due to a Fire Emergency in progress.
- True
- False
Correct Answer

A. True
3.

Each facility has a different person to contact for Safety TERT (Tactical Emergency Response Team).
- True
- False
Correct Answer

A. True

Explanation

DTO - Rodney Olsen
PEC - Keith Pitzen
Foundry/SPO - Bradley Westendorf
TCAO - Charles Larson
EW - Kevin Smith

Rate this question:
4.

How do you notify the John Deere Fire Brigade?
- On the phone
- Using the Base radio and changing to channel to 16 (Site All Call)
- Using the Base radio and changing to Channel 1 (Security Call)
- Pager
Correct Answer

A. Using the Base radio and changing to channel to 16 (Site All Call)

Explanation

Notification Instructions:

Using the base radio, the local main Security office will: switch the radio channel to “Site All Call”.

· EW: Channel 16

· DTO: Maintenance Zone > Channel 16

· PEC: Channel 16

· Foundry: Channel 16

· TCAO Maintenance > Channel 16

Rate this question:
5.

Officers should let the Evacuation Alarm to run until a member of the John Deere Management, IRT, TERT or Fire Brigade orders "All Clear"
- True
- False
Correct Answer

A. True
6.

A security officer should be sent out to all the Evacuation Gathering Points to notify employees that it is safe to return to normal business operation.
- True
- False
Correct Answer

A. True

Explanation

Send a Security Officer around to all Evacuation Gathering Points to notify
employees that it is safe to return to normal business operations.

Rate this question:
7.

The four simple steps for operating a fire extinguisher can be remembered with the word PASS. What does PASS stand for?
- Punch, Aim, Side, Sweep
- Push, Aim, Sweep, Squeeze
- Pull, Aim, Sweep, Squeeze
- Pull, Aim, Squeeze, Sweep
Correct Answer

A. Pull, Aim, Squeeze, Sweep

Explanation

P - Stands for PULL the Pin.

A- Stands for AIM at the base of the Fire

S - Stands for SQUEEZE the Handle

S - Stands for SWEEP at the base of the fire until extinguished.

Rate this question:
8.

When a Evacuation has been ordered: Security will press the "Global Msg On" button. The officer will then press the "Evac Message" button for complete DTO/SPO evacuation or press the individual building buttons (red buttons) and then “Evac Message” button for partial evacuation.
- True
- False
Correct Answer

A. True
9.

The four elements that must be present for fire to exist include heat, oxygen, fuel, and a chemical reaction between the three.
- True
- False
Correct Answer

A. True

Explanation

There must be Oxygen to sustain the combustion, Heat to raise the material to its ignition temperature, Fuel to suppose the combustion and a Chemical Reaction between the other three elements.

Remove any one of the four elements to extinguish the fire.

Rate this question:
10.

After an all clear has been given for an evacuation, DTO Security will use Send Word Now "All Clear Scenario"
- True
- False
Correct Answer

A. True
11.

When a fire occurs at your facility, what is the first thing you do?
- Call 911
- Find the Policy in the Security Web and follow step by step
- Find the Policy in the Security Web and don't follow it
- Evacuate the Building
Correct Answer

A. Find the Policy in the Security Web and follow step by step
12.

What circumstance(s) are required for a situation to be considered a Fire Emergency? (check all that apply)
- Smoke Reported
- Flame Reported
- Checking out a Badge
- Fire Alarm
Correct Answer(s)

A. Smoke Reported
A. Flame Reported
A. Fire Alarm
13.

DTO will use what system to notify Waterloo Works managers that their Facility has a emergency in progress?
- Send Word Now
- Evacuate
- Seek Shelter
- Call the Supervisor
Correct Answer

A. Send Word Now
14.

What is Step 4 of the Fire Emergency Plan?
- Call your designated ambulance entrance to inform them of the emergency
- Notify ONE person from Safety TERT
- Dispatch Mobile Security Officer to escort the Fire Department
- Notify your Security Supervisor
Correct Answer

A. Call your designated ambulance entrance to inform them of the emergency
15.

After the incident, Security should tour the building and report any damages to who?
- IRT and Security Supervisor
- Security Supervisor and TERT
- TERT and IRT
- Nobody
Correct Answer

A. IRT and Security Supervisor
16.

After the ALL CLEAR has been given, what is the first step to stop the alarm.
- Press the "Global Normal" on the Edwards Panel to stop the alarm
- Contact Gate 9 to inform them "All Clear"
- Press the “Evac Message” button to stop the evacuation alarm.
- Make the "All Clear" Announcement on the Radio
Correct Answer

A. Press the “Evac Message” button to stop the evacuation alarm.
17.

If an officer closes the Gate, what should they take with them. (Check ALL that apply)
- Radio
- Cell Phone
- Gate Keys
- Medical Bag
- AED
- Car Keys
- Computer
- Bolt Cutters
- Safety Glasses
Correct Answer(s)

A. Radio
A. Cell Phone
A. Gate Keys
A. Medical Bag
A. AED

Quiz Review Timeline (Updated): Mar 22, 2022 +

Our quizzes are rigorously reviewed, monitored and continuously updated by our expert board to maintain accuracy, relevance, and timeliness.

Current Version
Mar 22, 2022

Quiz Edited by
ProProfs Editorial Team
Jan 08, 2015

Quiz Created by
Jdtraining

2015 -- Drive Train Operations Fire

Who do you take instructions from in regards to Evacuating the building?

Quiz Preview

DTO Security should contact Gate 9 Security and inform them to stop all incoming vehicle traffic to DTO/SPO Facilities due to a Fire Emergency in progress.

Each facility has a different person to contact for Safety TERT (Tactical Emergency Response Team).

How do you notify the John Deere Fire Brigade?

Officers should let the Evacuation Alarm to run until a member of the John Deere Management, IRT, TERT or Fire Brigade orders "All Clear"

A security officer should be sent out to all the Evacuation Gathering Points to notify employees that it is safe to return to normal business operation.

The four simple steps for operating a fire extinguisher can be remembered with the word PASS. What does PASS stand for?

When a Evacuation has been ordered: Security will press the "Global Msg On" button. The officer will then press the "Evac Message" button for complete DTO/SPO evacuation or press the individual building buttons (red buttons) and then “Evac Message” button for partial evacuation.

The four elements that must be present for fire to exist include heat, oxygen, fuel, and a chemical reaction between the three.

After an all clear has been given for an evacuation, DTO Security will use Send Word Now "All Clear Scenario"

When a fire occurs at your facility, what is the first thing you do?

What circumstance(s) are required for a situation to be considered a Fire Emergency? (check all that apply)

DTO will use what system to notify Waterloo Works managers that their Facility has a emergency in progress?

What is Step 4 of the Fire Emergency Plan?

After the incident, Security should tour the building and report any damages to who?

After the ALL CLEAR has been given, what is the first step to stop the alarm.

If an officer closes the Gate, what should they take with them. (Check ALL that apply)