Volume 1 Unit 1 3CX5X
Settings
-
+
A quiz about volume 1 unit 1 of the 3CX5X. Choose the best fit answer even if 2 or more look correct.
- 1.Who carries the responsibilities to attend, study, and graduate from the 3C apprentice AFSC specific basic course?
- A.
Helper
- B.
Apprentice
- C.
Journeyman
- D.
Craftsman
- E.
Superintendent
- 2.Which Air Force Specialty Code shows the highest skill level of which you have achieved for a position you are currently assigned?
- A.
Primary AFSC
- B.
Duty AFSC
- C.
Control AFSC
- D.
Skill AFSC
- 3.What is the First and Second Digit combined with the Third character of an AFSC?
- A.
Career Group
- B.
Career Field
- C.
Career Field Subdivision
- D.
Skill Level
- 4.Which Skill level requires qualification in certain tasks, but to also require to complete a minimum of 15 months in upgrade training?
- A.
Helper
- B.
Apprentice
- C.
Journeyman
- D.
Craftsman
- E.
Superintendent
- 5.Which Skill Level requires to be within the top 3 percent of the enlisted force?
- A.
Helper
- B.
Apprentice
- C.
Journeyman
- D.
Craftsman
- E.
Superintendent
- 6.The initial skills training course will award which skill level upon completion of the in-resident course?
- A.
Helper
- B.
Apprentice
- C.
Journeyman
- D.
Craftsman
- E.
Superintendent
- 7.What designates an ability, skill, or special qualification that can be applied to any AFSC?
- A.
Prefix
- B.
Suffix
- C.
Special Experience Identifier
- D.
Training Identifier
- 8.What is awarded to individuals based upon completion of formal training or a unique course and experience performing specific duties?
- A.
Prefix
- B.
Suffix
- C.
Special Experience Identifier
- D.
Training Identifier
- 9.What is a comprehensive multi-purpose document that encapsulates the entire spectrum of career field training?
- A.
Air Force Job Qualification Standard (AFJQS)
- B.
Air Force Qualification Training Package (AFQTP)
- C.
Career Field Education and Training Plan (CFETP)
- D.
Career Development Course (CDC)
- E.
Specialty Training Standard (STS)
- 10.What is an Air Force publication that describes skills and knowledge that Airmen in a particular AFS need on the job?
- A.
Air Force Job Qualification Standard (AFJQS)
- B.
Air Force Qualification Training Package (AFQTP)
- C.
Career Field Education and Training Plan (CFETP)
- D.
Career Development Course (CDC)
- E.
Specialty Training Standard (STS)
- 11.Which Air Force Specialty Code identifies the authorized manning position to which you are assigned and reflects the job type you are currently performing?
- A.
Primary AFSC
- B.
Duty AFSC
- C.
Control AFSC
- D.
Skill AFSC
- 12.Which Air Force Specialty Code is for use by the Air Force Personnel Center for assignment and training purposes?
- A.
Primary AFSC
- B.
Duty AFSC
- C.
Control AFSC
- D.
Skill AFSC
- 13.What is AFMAN 36-2108?
- A.
Enlisted Specialties
- B.
Enlisted Classification
- C.
Enlisted Requirements
- D.
Enlisted Personnel
- 14.What is a comprehensive task list that describes a particular job type or duty position?
- A.
Air Force Job Qualification Standard (AFJQS)
- B.
Air Force Qualification Training Package (AFQTP)
- C.
Career Field Education and Training Plan (CFETP)
- D.
Career Development Course (CDC)
- E.
Specialty Training Standard (STS)
- 15.What is the first digit of an AFSC?
- A.
Career Group
- B.
Career Field
- C.
Career Field SubDivision
- D.
Skill Level
- 16.Who is the commander's key staff member responsible for overall management of the training program?
- A.
Superintendent
- B.
Unit Commander
- C.
Unit Training Manager
- D.
Chief Master Sergeant of The Unit
- 17.Which AFSC carries the responsibility to ensure circuit and line continuity: coordinate restoration of service; test subscriber equipment and verify end-to-end circuit serves?
- A.
C-CS Operations (3C0X1)
- B.
C-CS Programming (3C0X2)
- C.
C-CS Network Integration (3C2X1)
- D.
Radio Communications Systems (3C1X1)
- 18.Which AFSC operate, deploy and sustain radio transmitters, receivers, and ancillary equipment for line of sight, air to ground, and satellite communications? As well as configure antennas and radio equipment for efficient field of operations, while establishing and maintaining communications links with distant stations.
- A.
Information Management (IM) (3A0X1)
- B.
C-CS Operations (3C0X1)
- C.
C-CS Programming (3C0X2)
- D.
Radio Communications Systems (3C1X1)
- 19.Who should be one of the first and last people to meet while assigned to a unit and should interview you within 30 days, 60 days for personnel within an Air Reserve Component? They will ensure trainees are enrolled in required CDC's within 45 days of in processing.
- A.
Superintendent
- B.
Unit Commander
- C.
Unit Training Manager
- D.
Chief Master Sergeant of The Unit
- 20.Which skill level carries the following basic requirement criteria?1. Complete applicable AFJQSs/AFQTPs2. Complete all of the required 3CX5X STS core tasks.3. Complete the 3CX5X and AFSC specific CDCs.4. Have qualifications in and possession of AFSC 3CX3X5. Complete all local tasks assigned for the duty position.6. Eligible for a secret security clearance IAW AFI 31-501?7. Experience performing, basic AFSC tasks and functions.
- A.
Three
- B.
Five
- C.
Seven
- D.
Nine
- 21.To posses this skill level, personnel must have qualification in and posession of AFSC 3CX7X as well as have experience in directing functions of communication systems, operations and maintenance, C-CS security, or resource management? Must possess leadership abilities, obtained through experience and training, and you must be capable of filling positions requiring a general and sometimes technical knowledge of the Air Force and AFSC in? Responsibilities are to manage all or part of a C-CS facility including managing personnel and resources.
- A.
Three
- B.
Five
- C.
Seven
- D.
Nine
- 22.What is an instructional course designed for use at the unit to qualify, or aid in qualifying, in a duty position, in a program, or on a piece of equipment?
- A.
Air Force Job Qualification Standard (AFJQS)
- B.
Air Force Qualification Training Package (AFQTP)
- C.
Career Field Education and Training Plan (CFETP)
- D.
Career Development Course (CDC)
- E.
Specialty Training Standard (STS)
- 23.Which program consists of three components, that are; job knowledge, job proficiency and job experience? Job Knowledge is satisfied through CDCs designed to provide basic knowledge across a wide spectrum of subjects pertaining to a career field. Job Proficiency refers to the hands-on training provided on the job, allowing the trainee to gain proficiency in tasks performed in the work center.
- A.
Initial Skills Training
- B.
Regional Training Centers
- C.
On the Job Training (OJT)
- D.
Mission Readiness Training
- 24.What is used to provide weapons system training and technical knowledge outside the ATEC technical training centers' capability?
- A.
Initial Skills Training
- B.
Regional Training Centers
- C.
Career Development Courses (CDC)
- D.
Air Force Engineering and Technical Services
- 25.What is used to provide classroom training and hands-on maintenance practical skills?
- A.
Initial Skills Training
- B.
Regional Training Centers
- C.
Career Development Courses (CDC)
- D.
Air Force Engineering and Technical Services
- 26.Which Skill level responsibilities include performing simple tasks under guided supervision, as well as be expected to be provided OJT and complete the 3CX5X CDC as part of upgrade training?
- A.
Three
- B.
Five
- C.
Seven
- D.
Nine
- 27.
- A.
On-The-Job Training Record
- B.
Report of Task Evaulation
- C.
Special Task Certification and Recurring Training
- D.
Dress and Personal Appearance of Air Force Personnel
- 28.What is AETC IMT 156?
- A.
Job Qualification Standard Continuation/Command JQS
- B.
On-The-Job Training Record
- C.
Classification/On-The-Job Training Action
- D.
Student Training Report
- 29.What is AFI 36-2903?
- A.
On-The-Job Training Record
- B.
Report of Task Evaulation
- C.
Special Task Certification and Recurring Training
- D.
Dress and Personal Appearance of Air Force Personnel
- 30.Which AFSC performs system hardware and software operations, management, and administration? Also load software programs, files and databases on to network servers, as well as respond to trouble calls and console messages or signals?
- A.
Information Management (IM) (3A0X1)
- B.
C-CS Operations (3C0X1)
- C.
C-CS Programming (3C0X2)
- D.
Radio Communications Systems (3C1X1)
- 31.What is AF IMT 623a?
- A.
Job Qualification Standard Continuation/Command JQS
- B.
On-The-Job Training Record
- C.
Classification/On-The-Job Training Action
- D.
Student Training Report
- 32.What is a self-study correspondence course that provides Airmen with the fundamental knowledge of their AFS?
- A.
Air Force Job Qualification Standard (AFJQS)
- B.
Air Force Qualification Training Package (AFQTP)
- C.
Career Field Education and Training Plan (CFETP)
- D.
Career Development Course (CDC)
- E.
Specialty Training Standard (STS)
- 33.What is AF IMT 2096?
- A.
Job Qualification Standard Continuation/Command JQS
- B.
On-The-Job Training Record
- C.
Classification/On-The-Job Training Action
- D.
Student Training Report
- 34.Emphasis on what is focused on providing the command, control, and intelligence support to requiesting warfighters?
- A.
Deployed AEFS
- B.
Communications Squadron
- C.
Wartime Communications
- D.
Deployable Communications
- 35.Who must ensure all personnel perform safely, gardless of AFSC, and expects everyone to strictly adhere to technical data and all other written required procedures? They must also enforce sound equipment maintenance, supply discipline, and financial management practices.
- A.
Trainee
- B.
Supervisor
- C.
Superintendent
- D.
Unit Commander
- 36.What personnel is trained and qualified person who teaches personnel to perform a specific task through OJT methods? They execute their duties within the work center for the AF training program, and must be recommended by their supervisor, qualified to perform the task being trained, and have completed the Air Force Training Course (AFTC).
- A.
Trainee
- B.
Trainer
- C.
Supervisor
- D.
Superintendent
- 37.Which skill level carries the following basic requirement criteria?1. Complete all of 3CX5X STS core tasks2. Complete applicable AFJQSs/AFQTPs3. Complete all local tasks assigned to duty position4. Have qualification in and posession of AFSC 3CX5X5. Eligible for a secret security clearance IAW AFI 31-5016. Complete Advanced C-CS craftsman course7. Have experience performing and supervising required AFSC functions
- A.
Three
- B.
Five
- C.
Seven
- D.
Nine
- 38.What is AFOSH Standard 91-46?
- A.
Occupational Noise and Hearing Conservation Program
- B.
Material Handling and Storage Equipment
- C.
Communications Cable, Antenna & Communications-Electronics Systems
- D.
Data Processing Facilities
- 39.What is AFOSH Standard 91-50?
- A.
Occupational Noise and Hearing Conservation Program
- B.
Material Handling and Storage Equipment
- C.
Communications Cable, Antenna & Communications-Electronics Systems
- D.
Data Processing Facilities
- 40.Who must provide an expereinced managerial and technical perspective in the communications activity by advising and assisting the unit, as well as being an advisor, teacher and confidant to communications personnel? They must as well advise and assist staff, and work center supervisors in managing and administering communications and maintenance programs.
- A.
Trainee
- B.
Trainer
- C.
Supervisor
- D.
Superintendent
- 41.What is AF IMT 797?
- A.
Job Qualification Standard Continuation/Command JQS
- B.
On-The-Job Training Record
- C.
Classification/On-The-Job Training Action
- D.
Student Training Report
- 42.Who has the single greatest impact on mission accomplishment and must share their expereinces and expertise with others to meet mission requirements and provide a quality training program? As well as encouraged to allow personnel time to complete course work during normal duty hours, if mission requirements allow. They must also monitor personnel progress to ensure timely completion of CDC's or Advanced Distributed Learning Course Work.
- A.
Trainee
- B.
Trainer
- C.
Supervisor
- D.
Superintendent
- 43.What is AFOSH Standard 48-20?
- A.
Occupational Noise and Hearing Conservation Program
- B.
Material Handling and Storage Equipment
- C.
Communications Cable, Antenna & Communications-Electronics Systems
- D.
Data Processing Facilities
- 44.Which responsibilities belong to personnel required to obtain and maintain knowledge, qualifications, and certifications appropriate to the skill level within your assigned specialty, budget on and off-duty time to complete assigned training tasks, particularly CDC and self-study training requirements, within established time limits.
- A.
Trainee
- B.
Trainer
- C.
Supervisor
- D.
Superintendent
- 45.What is AFI 40-502?
- A.
Adhering to Military Standards
- B.
Dress and Personal Appearance of Air Force Personnel
- C.
On-The-Job Training
- D.
The Weight and Body Fat Management Program
- 46.Which amount of current flow through the body can cause a shock that may result in cardiac arrest?
- A.
10 mA
- B.
50 mA
- C.
200 mA
- D.
600 mA
- 47.What is AFI 90-821
- A.
Hazard Communication
- B.
Training Systems Fire Protection
- C.
Air Force Occupational and Environment Safety, Fire Protection, and Health Program
- D.
Hazard Communication
- 48.What program has the goal to minimize the incidence of chemically induced occupational illnesses and injuries in the work area/shops by establishing guidance for training employees on the health and physical hazards associated with proper preventive measures?
- A.
AFOSH
- B.
HAZCOM
- C.
DELTOR
- D.
LEGACY
- 49.When a metal object, such as a tool, comes in contact between a high current source and ground, it becomes a conductor. High current will flow from the electrical terminal through the tool to ground, resulting in what? This can cause serious burns to the body and temporary or permanent blindness.
- A.
Electric Shock
- B.
Non-Ionizing Radiation
- C.
Ionizing Radiation
- D.
Electric Arc
- 50.What is 91-118
- A.
Chemical Safety
- B.
Training Systems Fire Protection
- C.
Air Force Occupational and Environment Safety, Fire Protection, and Health Program
- D.
Hazard Communication
- 51.What can typically be found outdoors near satellite dishes or indoors from electronic equipment such as electron tubes which can generate radio waves?
- A.
Radiation
- B.
Electric Shock
- C.
Non-Ionizing Radiation
- D.
Ionizing Radiation
- 52.If the number of electrons is less than the number of protons, the particle is a what?
- A.
Cation
- B.
Non-Ionizing Radiation
- C.
Ionizing Radiation
- D.
Anion
- 53.What is AFI 91-301
- A.
Chemical Safety
- B.
Training Systems Fire Protection
- C.
Air Force Occupational and Environment Safety, Fire Protection, and Health Program
- D.
Hazard Communication
- 54.Who must safety hazards be reported to once identified?
- A.
Supervisor, commander or safety representative
- B.
Supervisor, safety representative or superintendent
- C.
Supervisor, unit safety representative or ground safety officer
- D.
Supervisor, ground safety officer or superintendent
- 55.Which radiation produces heating in body tissues and absorption by the body is both frequency and body-shape dependent? Thus it is possible for a person to absorb selectively damaging amounts of this radiation in deep tissue harming organs with little or no sensation of skin heating.
- A.
Cation
- B.
Non-Ionizing Radiation
- C.
Ionizing Radiation
- D.
Anion
- 56.Which must a safety board consist of?
- A.
Grounding Stick and Resuscitation and closed chest heart massage instructions.
- B.
Emergency phone numbers and first-aid kit at remote facilities
- C.
Hook with hardwood handle, rope and Insulated fuse puller, as well as a flashlight
- D.
All tools listed above
- 57.Which radiation whose waves contain energy sufficient to overcome the binding energy of electrons in atoms or molecules, thus creating ions?
- A.
Cation
- B.
Non-Ionizing Radiation
- C.
Ionizing Radiation
- D.
Anion
- 58.If the number of electrons is greater than the number of protons, the particle is a what?
- A.
Cation
- B.
Non-Ionizing Radiation
- C.
Ionizing Radiation
- D.
Anion
- 59.Which ORM step must personnel Assess The Risk?
- A.
Step 1
- B.
Step 2
- C.
Step 3
- D.
Step 4
- E.
Step 5
- 60.What are principles of ORM?
- A.
Accept no unnecessary risk
- B.
Make risk decisions at the appropriate level
- C.
Accept risk when benefits outweigh the costs
- D.
Integrate ORM into operations and planning all levels
- E.
ALL ANSWERS ARE ORM PRINCIPLES
- 61.What tool is used to neutralize ionized air?
- A.
Conductive Wrist Strap
- B.
Ionizing Blower
- C.
Non-Ionizing Blower
- D.
Microwave
- 62.What is AFOSH Standard 91-64?
- A.
Occupational Noise and Hearing Conservation Program
- B.
Material Handling and Storage Equipment
- C.
Communications Cable, Antenna & Communications-Electronics Systems
- D.
Data Processing Facilities
- 63.What is AFOSH Standard 91-68?
- A.
Chemical Safety
- B.
Training Systems Fire Protection
- C.
Air Force Occupational and Environment Safety, Fire Protection, and Health Program
- D.
Hazard Communication
- 64.Areas with decibals at what amount or above can cause hearling loss and shall clearly be identified by signs located at entrances to, or the borders of, the area?
- A.
40 dB
- B.
60 dB
- C.
85 dB
- D.
112 dB
- 65.What are goals of ORM?
- A.
Enhance mission effectiveness at all levels, while preserving assets and safeguarding health and welfare
- B.
Integrate ORM into mission processes, ensuring decisions are based upon assessments of risk integral to the activity and mission.
- C.
Create an Air Force in which every leader, airman and employee is trained and motivated to manage risk in all their on- and off-duty activities
- D.
Identify opportunities to increase Air Force warfighting effectiveness on the battlefield and in the operation aerospace environment, helping to ensure decisive victory in any future conflict at the last possible cost
- E.
ALL ANSWERS ARE ORM GOALS
- 66.Which voltage must a safety observer be present and will not start until one arrives?
- A.
50 Volts
- B.
100 Volts
- C.
425 Volts
- D.
600 Volts
- 67.What is AFI 90-901?
- A.
Operational Risk Management Program
- B.
Operational Risk Management Guidelines and Tools
- C.
Life Safety Code
- D.
Personnel Security Program Management
- 68.Which ESD Class is 15,000 Volts or Above?
- A.
I
- B.
II
- C.
III
- D.
IV
- 69.Which ORM step must personnel Make control decisions?
- A.
Step 1
- B.
Step 2
- C.
Step 3
- D.
Step 4
- E.
Step 5
- 70.What is the requirement to adhere to the standards of neatness, cleanliness, and safety; and should present a military image in accordance with AFI 36-2903?
- A.
Adhering To Military Instructions
- B.
Following Protocol
- C.
Adhering to Military Standards
- D.
Following Commander Orders
- 71.Which ESD Class is 1000 - 3,999 Volts?
- A.
I
- B.
II
- C.
III
- D.
IV
- 72.What is AFPAM 90-902?
- A.
Operational Risk Management Program
- B.
Operational Risk Management Guidelines and Tools
- C.
Life Safety Code
- D.
Personnel Security Program Management
- 73.Which ORM step must personnel Implement Risk Controls?
- A.
Step 1
- B.
Step 2
- C.
Step 3
- D.
Step 4
- E.
Step 5
- 74.What is Operational Risk Management?
- A.
Decision-making process to systematically evaluate possible courses of action, identify risks and benefits, and determine the best course of action for any given situation.
- B.
Free Answer, Just read what it means... Important to Air Force efficiency
Back to top