Touchmix Certification Exam New
Welcome to the TouchMix Certification Exam!Completion of the following exam will confirm your status as an expert on the QSC TouchMix Compact Digital Mixer. Exam questions are based on the TouchMix Training Series videos, and you should be sure to watch each of these videos in their entirety before attempting the exam.
You must correctly answer 70% of the questions to pass. If you fail this exam three times, please contact [email protected]/* */ to request your status to be reset.
Good luck, and happy mixing!
- 1.
What are the different models of TouchMix?
- A.
TouchMix-30 Pro, TouchMix-16 and TouchMix-8
- B.
TouchMix-12, TouchMix-16 and TouchMix-24
- C.
TouchMix-Simple and TouchMix-Advanced
- D.
TouchMix-8 and TouchMix-Pro
Correct Answer
A. TouchMix-30 Pro, TouchMix-16 and TouchMix-8Explanation
The different models of TouchMix are TouchMix-30 Pro, TouchMix-16, and TouchMix-8.Rate this question:
-
- 2.
What connections are on the back of the TouchMix?[CHECK ALL THAT APPLY]
- A.
XLR Main Outputs
- B.
XLR Auxiliary outputs
- C.
XLR Talkback Mic input
- D.
Power connection
- E.
Accessory Jack
- F.
2 USB Ports
Correct Answer(s)
A. XLR Main Outputs
B. XLR Auxiliary outputs
C. XLR Talkback Mic input
D. Power connection
E. Accessory Jack
F. 2 USB PortsExplanation
The TouchMix has multiple connections on its back, including XLR Main Outputs for connecting to main speakers, XLR Auxiliary outputs for connecting to additional speakers or monitors, XLR Talkback Mic input for connecting a microphone for communication, Power connection for powering the device, Accessory Jack for connecting external devices or accessories, and 2 USB Ports for connecting USB devices or for recording and playback purposes.Rate this question:
-
- 3.
What is the main difference between the different models of TouchMix?
- A.
Different number of inputs and outputs, but the same power and processing
- B.
Different processing speed and internal memory
- C.
Different colors and construction materials
Correct Answer
A. Different number of inputs and outputs, but the same power and processingExplanation
The main difference between the different models of TouchMix is the number of inputs and outputs. While they all have the same power and processing capabilities, each model offers varying amounts of inputs and outputs. This allows users to choose a model that best suits their specific needs and requirements, whether they require a larger number of inputs and outputs for a more complex setup, or a smaller number for a simpler setup.Rate this question:
-
- 4.
What is the best suggested method of operating the TouchMix?
- A.
“Touch and Turn,” one hand on the touchscreen, one hand on the Master Wheel.
- B.
“Slam and Bam,” both fists on the touchscreen, repeatedly.
- C.
“Wait and Hope,” no hands on the mixer, wait for someone else to do it for you.
- D.
“Scratch and Sniff,” one finger and one nose on the touchscreen.
Correct Answer
A. “Touch and Turn,” one hand on the touchscreen, one hand on the Master Wheel.Explanation
The best suggested method of operating the TouchMix is to use the "Touch and Turn" technique, which involves using one hand on the touchscreen and the other hand on the Master Wheel. This allows for precise control and adjustment of the mixer's settings and parameters.Rate this question:
-
- 5.
The TouchMix allows for phantom power to be toggled on or off for each input channel individually.
- A.
True
- B.
False
Correct Answer
A. TrueExplanation
The TouchMix allows for phantom power to be toggled on or off for each input channel individually. This means that users have the flexibility to activate or deactivate phantom power for specific input channels based on their requirements. This feature is beneficial when using microphones or other audio devices that require phantom power, as it ensures that only the necessary channels receive the power, reducing the risk of damage to equipment and optimizing the overall audio quality.Rate this question:
-
- 6.
What is the advantage of Simple and Advanced Mode?
- A.
Simple mode provides fewer controls to quickly adjust a particular process, while Advanced Mode gives more experienced users control over every aspect of the process.
- B.
Simple mode makes the text and fader heads oversized, while Advanced mode makes it intentionally difficult to read text or make changes.
- C.
Simple mode provides nothing but one gain fader for every channel, and Advanced mode requires a password to access further control.
Correct Answer
A. Simple mode provides fewer controls to quickly adjust a particular process, while Advanced Mode gives more experienced users control over every aspect of the process.Explanation
Simple mode provides fewer controls to quickly adjust a particular process, while Advanced Mode gives more experienced users control over every aspect of the process. This means that Simple mode is designed for users who want a simplified and streamlined experience, allowing them to make quick adjustments without overwhelming them with too many options. On the other hand, Advanced mode is for users who have more knowledge and expertise in the process, and it provides them with a wide range of controls to fine-tune and customize every aspect according to their specific needs.Rate this question:
-
- 7.
If you change any one screen from Advanced to Simple Mode, then all screens will now default to Simple Mode.
- A.
True
- B.
False
Correct Answer
B. FalseExplanation
Changing one screen from Advanced to Simple Mode does not mean that all screens will now default to Simple Mode. It only affects the specific screen that was changed. The other screens will still retain their previous mode unless individually changed.Rate this question:
-
- 8.
If you change a screen from Advanced to Simple Mode, all of your advanced settings are lost and reset by the simple controls.
- A.
True
- B.
False
Correct Answer
B. FalseExplanation
Changing a screen from Advanced to Simple Mode does not result in the loss or reset of all advanced settings. Therefore, the statement is false.Rate this question:
-
- 9.
What is the advantage of using the factory channel presets?
- A.
Less experienced users can add professionally-created EQ for their instruments with the touch of a few buttons.
- B.
Experienced audio engineers can save time by using a preset and then fine-tuning any remaining parameters for their venue.
Correct Answer(s)
A. Less experienced users can add professionally-created EQ for their instruments with the touch of a few buttons.
B. Experienced audio engineers can save time by using a preset and then fine-tuning any remaining parameters for their venue.Explanation
The advantage of using the factory channel presets is that less experienced users can easily add professionally-created EQ for their instruments with just a few button presses. This allows them to achieve a high-quality sound without needing extensive knowledge or experience in audio engineering. Additionally, experienced audio engineers can benefit from the presets by saving time. They can start with a preset and then make any necessary adjustments to fine-tune the sound for their specific venue, rather than starting from scratch. This allows them to work more efficiently and focus on other aspects of their job.Rate this question:
-
- 10.
When loading a preset to a channel, what does the “Omit Name” option do?
- A.
It will preserve the channel’s current name when the Preset is loaded.
- B.
It will delete the channel’s current name and restore its default name setting.
- C.
It will remove the name field entirely from the channel and make the gain fader taller.
Correct Answer
A. It will preserve the channel’s current name when the Preset is loaded.Explanation
The "Omit Name" option, when selected, will keep the channel's existing name intact when a preset is loaded. This means that the preset will not change the name of the channel, allowing the user to maintain the current identification of the channel even after applying the preset.Rate this question:
-
- 11.
How were the channel presets created?
- A.
A team of TouchMIx engineers spent weeks working with real musicians and a variety of instruments and PA gear to create useful presets that work for actual performances.
- B.
Presets were applied to synthesized instruments in a studio by one engineer using headphones only.
- C.
EQ, Compression, and Gate was randomly assigned to channels, and then labeled based on what sort of instrument the end result sounded like.
Correct Answer
A. A team of TouchMIx engineers spent weeks working with real musicians and a variety of instruments and PA gear to create useful presets that work for actual performances.Explanation
A team of TouchMIx engineers collaborated with real musicians and used a range of instruments and PA gear to develop presets that are practical and effective for live performances.Rate this question:
-
- 12.
When a new Scene is saved, what information is stored/recalled within that scene?[CHECK ALL THAT APPLY]
- A.
Channel presets
- B.
FX selections
- C.
Pan
- D.
Fader settings
- E.
EQ
- F.
Compression
- G.
Gates
- H.
Channel names
Correct Answer(s)
A. Channel presets
B. FX selections
C. Pan
D. Fader settings
E. EQ
F. Compression
G. Gates
H. Channel namesExplanation
When a new Scene is saved, the information that is stored/recalled within that scene includes channel presets, FX selections, pan settings, fader settings, EQ settings, compression settings, gates settings, and channel names.Rate this question:
-
- 13.
What are the available FX processors?[CHECK ALL THAT APPLY]
- A.
Basic Chorus
- B.
Pitch Change
- C.
Dense Reverb
- D.
Lush Reverb
- E.
Mono Delay
- F.
Stereo Delay
- G.
Doppler Effect
Correct Answer(s)
A. Basic Chorus
B. Pitch Change
C. Dense Reverb
D. Lush Reverb
E. Mono Delay
F. Stereo DelayExplanation
The available FX processors are Basic Chorus, Pitch Change, Dense Reverb, Lush Reverb, Mono Delay, and Stereo Delay.Rate this question:
-
- 14.
How many FX processors can be used simultaneously?
- A.
1
- B.
2
- C.
3
- D.
4
Correct Answer
D. 4Explanation
A maximum of 4 FX processors can be used simultaneously.Rate this question:
-
- 15.
How many channels can be sent to a single FX processor?
- A.
1
- B.
2
- C.
4
- D.
As many as you like
Correct Answer
D. As many as you likeExplanation
The answer "As many as you like" suggests that there is no limit to the number of channels that can be sent to a single FX processor. This implies that the FX processor has the capability to handle any number of channels, making it a versatile and flexible tool for audio processing.Rate this question:
-
- 16.
What does the FX Wizard do?
- A.
Lets a user quickly apply an FX preset to multiple channels based on instrument type and style.
- B.
Lets a user manage pyrotechnic and laser lighting rigs through the TouchMix.
- C.
Lets a user change the color scheme and sound effects of the TouchMix navigation.
Correct Answer
A. Lets a user quickly apply an FX preset to multiple channels based on instrument type and style.Explanation
The FX Wizard allows users to easily apply an FX preset to multiple channels, taking into account the instrument type and style. This feature saves time and effort by automating the process of adding effects to multiple channels individually. Users can simply select the desired instrument type and style, and the FX Wizard will apply the appropriate FX preset to all relevant channels. This simplifies the workflow and enhances the user experience by streamlining the application of effects in a targeted and efficient manner.Rate this question:
-
- 17.
The FX Wizard will only show the FX styles that are relevant to the specified instrument type.
- A.
True
- B.
False
Correct Answer
A. TrueExplanation
The FX Wizard is designed to display only the FX styles that are applicable or suitable for the specified instrument type. This means that it filters out any irrelevant or incompatible FX styles and only presents the ones that are relevant and can be used with the selected instrument type. Therefore, the statement is true.Rate this question:
-
- 18.
What is the primary purpose of the Gain Wizard?
- A.
It indicates the amount of clipping that has occurred on each channel, and recommends how much its input trim knob should be adjusted.
- B.
It automatically mixes your channel’s gain faders for the best sounding band mix.
- C.
It normalizes all channels by adding gain to softer inputs and removing it from louder inputs.
Correct Answer
A. It indicates the amount of clipping that has occurred on each channel, and recommends how much its input trim knob should be adjusted.Explanation
The primary purpose of the Gain Wizard is to indicate the amount of clipping that has occurred on each channel and recommend how much its input trim knob should be adjusted. This feature helps to ensure that the audio signals are not distorted and allows the user to make the necessary adjustments to maintain optimal sound quality.Rate this question:
-
- 19.
What does it mean if a channel remains red in the mini-fader bank at the top of the Main screen?
- A.
That channel has experienced clipping.
- B.
That channel is muted.
- C.
That channel does not have anything connected to it.
- D.
That channel has phantom power active.
Correct Answer
A. That channel has experienced clipping.Explanation
If a channel remains red in the mini-fader bank at the top of the Main screen, it means that the channel has experienced clipping. Clipping occurs when the audio signal exceeds the maximum level that the channel can handle, resulting in distortion. The red color indicates a warning sign, alerting the user to adjust the levels and prevent further clipping.Rate this question:
-
- 20.
When might a USB thumb drive be used in regards to Recording functions?
- A.
Only for recording a single stereo track
- B.
For recording all 22-tracks of a recording session
- C.
Never, this device is not usable for any recording purposes.
Correct Answer
A. Only for recording a single stereo trackExplanation
A USB thumb drive might be used for recording a single stereo track because it has the capacity to store audio data. It can be plugged into a compatible recording device or computer, allowing the user to capture a stereo audio signal and save it directly onto the thumb drive. However, it is not suitable for recording all 22 tracks of a recording session as it may not have enough storage capacity or the necessary features to handle multiple tracks simultaneously.Rate this question:
-
- 21.
What file system must any hard drive/thumb drive have to be used by the TouchMix?
- A.
FAT32
- B.
FAT
- C.
NTFS
- D.
ESATA
Correct Answer
A. FAT32Explanation
The correct answer is FAT32. FAT32 is a file system that is compatible with a wide range of devices, including the TouchMix. It allows for easy transfer of files between different operating systems and is supported by most modern devices. NTFS is another file system commonly used in Windows operating systems, but it may not be compatible with all devices. eSATA is a type of connection interface for external hard drives, and it is not a file system itself.Rate this question:
-
- 22.
What two hard drives do the video recommend for an efficient recording workflow?
- A.
Show Drive and Archive Drive
- B.
Performance Drive and Studio Drive
- C.
Live Drive and Prerecorded Drive
- D.
Travel Drive and Network Drive
Correct Answer
A. Show Drive and Archive DriveExplanation
The video recommends using a Show Drive and an Archive Drive for an efficient recording workflow. The Show Drive is likely meant for storing and accessing the current or ongoing projects, while the Archive Drive is probably intended for long-term storage and backup of completed projects. By separating the storage and organization of active and completed projects, the workflow can be streamlined and more efficient.Rate this question:
-
- 23.
In regards to recording, what is the difference between the Track and Arm controls on a channel?
- A.
Track will use the recorded track on the hard drive as the channel’s source, while Arm will enable that channel to be recorded.
- B.
Track will keep a log of all changes made to that channel, while Arm will restore the channel to its last saved state.
- C.
Track will set up the channel to be recorded onto the hard drive, and Arm will begin the recording session.
Correct Answer
A. Track will use the recorded track on the hard drive as the channel’s source, while Arm will enable that channel to be recorded.Explanation
The Track control on a channel refers to using the recorded track on the hard drive as the channel's source, meaning that the audio from the recorded track will be played back through that channel. On the other hand, the Arm control enables the channel to be recorded, indicating that when the recording session starts, any audio input or signal that is sent to that channel will be recorded.Rate this question:
-
- 24.
It is important to press the STOP button after any recording session before disconnecting the hard drive or powering down the mixer.
- A.
True
- B.
False
Correct Answer
A. TrueExplanation
Pressing the STOP button after a recording session before disconnecting the hard drive or powering down the mixer is important because it allows the recording device to properly close the recording file and save any changes or edits made during the session. This helps to prevent data loss or corruption and ensures that the recording is safely stored on the hard drive.Rate this question:
-
- 25.
The TouchMix-16 can use Aux 7/8 or Aux 9/10 as a source for its 2-track recording channel.
- A.
True
- B.
False
Correct Answer
A. TrueExplanation
The TouchMix-16 has the capability to use either Aux 7/8 or Aux 9/10 as a source for its 2-track recording channel. This means that users can connect external devices or instruments to either of these auxiliary channels and record their audio directly into the TouchMix-16 for further processing or playback.Rate this question:
-
- 26.
How could you make a 2-track mix-down of a multi-track recording on the hard drive?
- A.
Select all channels to use Track as their source and arm the 2-track recording channel.
- B.
Select “hard drive mixdown” as the source of a channel and send it to an auxiliary output.
- C.
This cannot be accomplished with the TouchMix, and must be done using a DAW.
Correct Answer
A. Select all channels to use Track as their source and arm the 2-track recording channel.Explanation
To make a 2-track mix-down of a multi-track recording on the hard drive, you need to select all channels to use Track as their source. This means that all the individual tracks will be routed to the 2-track recording channel. By arming the 2-track recording channel, you are preparing it to record the mix-down. This process allows you to combine all the individual tracks into a stereo mix that can be saved on the hard drive.Rate this question:
-
- 27.
To update the firmware on your TouchMix with a flash drive, the drive must be formatted to use what type of file system?
- A.
NTFS file system
- B.
N64 file system
- C.
FAT32 file system
Correct Answer
C. FAT32 file systemExplanation
To update the firmware on your TouchMix with a flash drive, the drive must be formatted to use the FAT32 file system. This is because the TouchMix firmware update process requires the flash drive to be formatted in FAT32 in order for the system to recognize and install the firmware update properly. The FAT32 file system is commonly used for flash drives and is compatible with a wide range of devices, making it the recommended file system for this purpose.Rate this question:
-
- 28.
What is the file type of TouchMix firmware updates?
- A.
*.rar
- B.
*.tar.gz
- C.
*.qsc
- D.
*.zip
Correct Answer
B. *.tar.gzExplanation
The correct answer is *.tar.gz. This file type is commonly used for firmware updates in TouchMix devices. The .tar.gz extension indicates that the file is compressed and archived using the Tar and Gzip formats. It is a common practice to package firmware updates in this format to ensure efficient storage and transfer of the files.Rate this question:
-
- 29.
About how long does it take to update the TouchMix firmware?
- A.
30 - 45 seconds
- B.
5 - 10 minutes
- C.
20 - 30 minutes
Correct Answer
B. 5 - 10 minutesExplanation
The correct answer is 5 - 10 minutes. This is the estimated time it takes to update the TouchMix firmware. Firmware updates typically involve updating the software and programming of a device, which can take some time to complete. The given time range suggests that the process may take between 5 to 10 minutes, allowing for variations depending on the specific device and the speed of the update process.Rate this question:
-
- 30.
How can audio files be moved onto the TouchMix console?
- A.
Simply drag and drop the new files onto your external hard drive and plug it into the TouchMix.
- B.
Use a DAW Utility.
- C.
Place a cassette tape into the TouchMix and push the record button.
Correct Answer
B. Use a DAW Utility.Explanation
The correct answer is to use a DAW Utility. A DAW (Digital Audio Workstation) Utility is a software tool that allows users to transfer audio files from a computer to the TouchMix console. This method is commonly used in professional audio production to ensure accurate and high-quality file transfer. Using a DAW Utility provides a more efficient and reliable way to move audio files onto the TouchMix console compared to other methods mentioned in the question.Rate this question:
-
- 31.
When using the overdubbing feature:
- A.
TouchMix will play the previously recorded track while simultaneously recording.
- B.
Only the last take of the recording will play from the TouchMix.
- C.
Every take is recorded onto your external hard drive.
Correct Answer(s)
A. TouchMix will play the previously recorded track while simultaneously recording.
B. Only the last take of the recording will play from the TouchMix.
C. Every take is recorded onto your external hard drive.Explanation
The overdubbing feature on the TouchMix allows you to play the previously recorded track while simultaneously recording. This means that you can listen to the existing track while adding new layers or parts to it. However, when you play back the recording from the TouchMix, only the last take will be played. This means that if you have recorded multiple takes, only the most recent one will be heard when playing back from the TouchMix. However, all the takes are still recorded and saved onto your external hard drive.Rate this question:
-
- 32.
The TouchMix saves all recorded audio into a separate folder for each armed channel.
- A.
True
- B.
False
Correct Answer
A. TrueExplanation
The statement is true because the TouchMix system has the capability to save all recorded audio into separate folders for each armed channel. This feature allows for easy organization and access to the recorded audio files, making it convenient for users to locate and manage their recordings efficiently.Rate this question:
-
- 33.
What features are found on the TouchMix-30 Pro that are not on the TouchMix-16?
- A.
Input channel processing including 4-band PEQ, compressor and gate.
- B.
More than 120 factory presets.
- C.
RTA, Sub Groups, DAW interface, MP3 player.
- D.
Dual channel 1,000 watt power amplifier.
Correct Answer
C. RTA, Sub Groups, DAW interface, MP3 player.Explanation
The features that are found on the TouchMix-30 Pro but not on the TouchMix-16 are RTA (Real-Time Analyzer), Sub Groups, DAW (Digital Audio Workstation) interface, and MP3 player. These additional features provide enhanced functionality and flexibility for audio processing and control. The RTA allows for real-time analysis of audio signals, the Sub Groups allow for grouping and processing multiple channels together, the DAW interface allows for seamless integration with computer-based recording systems, and the MP3 player allows for playback of audio files directly from the mixer.Rate this question:
-
- 34.
What is an RTA and what does it do?
- A.
Rapid Transient Attenuator – reduces the level of audio peaks to prevent damage to loudspeakers.
- B.
Real Time Analyzer – provides a dynamic display of the frequency balance of an audio signal.
- C.
Ray Tracing Accelerator – creates realistic reverb by modelling how sound waves reflect in an acoustic space.
Correct Answer
B. Real Time Analyzer – provides a dynamic display of the frequency balance of an audio signal.Explanation
An RTA, or Real Time Analyzer, is a device that provides a dynamic display of the frequency balance of an audio signal. It allows users to visualize the distribution of frequencies in real-time, helping them to identify any imbalances or issues in the audio signal. This can be useful for audio engineers, musicians, and sound technicians who need to accurately analyze and adjust the frequency response of a sound system or recording. By providing a visual representation of the audio signal, an RTA helps ensure that the sound is balanced and optimized for the desired listening experience.Rate this question:
-
- 35.
In the DAW video, Patrick and Nate are wearing what color shirts?
- A.
Neither one is wearing a shirt
- B.
Blue to match the QSC logo
- C.
Black
- D.
White
Correct Answer
C. BlackExplanation
In the DAW video, Patrick and Nate are wearing black shirts.Rate this question:
-
- 36.
In live sound, the best tool to overcome feedback is…
- A.
Limiter
- B.
Notch filters
- C.
Graphic equalizer
- D.
Crossover
Correct Answer
B. Notch filtersExplanation
Notch filters are the best tool to overcome feedback in live sound. Feedback occurs when the sound from the speakers is picked up by the microphones and re-amplified, creating a loop of increasing volume. Notch filters are specifically designed to target and reduce specific frequencies, which are causing feedback, without affecting the overall sound quality. By attenuating these problem frequencies, notch filters help eliminate feedback and allow for a clean and clear sound reinforcement in live sound situations.Rate this question:
-
- 37.
The larger, 10” screen on the TouchMix-30 allows the addition of which features?
- A.
Direct, one-button selection of aux mixes.
- B.
The ability to view YouTube cat videos on the mixer.
- C.
Channel overview that displays all channel settings at once.
- D.
A and C
Correct Answer
D. A and CExplanation
The larger, 10" screen on the TouchMix-30 allows the addition of direct, one-button selection of aux mixes and a channel overview that displays all channel settings at once. This means that with the larger screen, users can easily access and control aux mixes without navigating through multiple menus, and they can quickly see and adjust settings for all channels at a glance. The ability to view YouTube cat videos on the mixer is not mentioned and is not a feature enabled by the larger screen.Rate this question:
-
Quiz Review Timeline +
Our quizzes are rigorously reviewed, monitored and continuously updated by our expert board to maintain accuracy, relevance, and timeliness.
-
Current Version
-
Mar 21, 2023Quiz Edited by
ProProfs Editorial Team -
Sep 23, 2016Quiz Created by
Patrick Heyn
- Aeronautics Quizzes
- Aerospace Quizzes
- Agricultural Science Quizzes
- Astrology Quizzes
- Astronomy Quizzes
- Atom Quizzes
- Biochemistry Quizzes
- Biology Quizzes
- Biomechanics Quizzes
- Biostatistics Quizzes
- Biotechnology Quizzes
- Botany Quizzes
- Branches Of Science Quizzes
- Chemistry Quizzes
- Cytology Quizzes
- Easy Science Quizzes
- Ecology Quizzes
- Electrical Quizzes
- Embryology Quizzes
- Endocrinology Quizzes
- Environmental Science Quizzes
- Epidemiology Quizzes
- Experiment Quizzes
- Forestry Quizzes
- Fossil Quizzes
- Gas Quizzes
- General Science Quizzes
- Genetics Quizzes
- Histology Quizzes
- Human Biology Quizzes
- Integrated Science Quizzes
- Invention Quizzes
- Library Science Quizzes
- Lighting Quizzes
- Liquid Quizzes
- Marine Biology Quizzes
- Microbiology Quizzes
- Molecular Biology Quizzes
- Nature Quizzes
- Neuroscience Quizzes
- Nuclear Science Quizzes
- Oceanography Quizzes
- Physics Quizzes
- Psychology Quizzes
- Science And Technology Quizzes
- Science Glossary Quizzes
- Science Knowledge Quizzes
- Science Practice Quizzes
- Scientific Method Quizzes
- Scientific Notation Quizzes
- Soil Science Quizzes
- Solar System Quizzes
- Solid Quizzes
- Zoology Quizzes