Ansi-american National Standards Institute Quiz
Receipt Inspection ANSI N45.2. 6 Exam
Questions and Answers
- 1.
What ANSI standard is used as a basic for Qualification of Inspection, Examination, and Testing Personnel for Nuclear Power Plants?
- A.
ANSI N45.2.3
- B.
ANSI N49.2.5
- C.
ANSI N45.2.6
- D.
ANSI N47.2.7
Correct Answer
C. ANSI N45.2.6Explanation
The correct answer is ANSI N45.2.6. This standard is used as a basis for qualifying inspection, examination, and testing personnel for nuclear power plants.Rate this question:
-
- 2.
Any person who has not performed inspection, examination, or testingactivities in his qualified area for a period of ____ year shall be reevaluated by a re-determination of required capability in accordance with ANSI requirements.
- A.
1 Year
- B.
2 Years
- C.
3 Years
- D.
4 Years
Correct Answer
A. 1 YearExplanation
If a person has not performed inspection, examination, or testing activities in their qualified area for a period of 1 year, they will need to be reevaluated to determine if they still have the required capability. This is in accordance with ANSI requirements, which likely have specific guidelines for maintaining qualifications and staying up-to-date in the field.Rate this question:
-
- 3.
How many levels of qualifications are identified under ANSI general qualifications? The requirements for each level are not limiting with regard to organizational position of professional status, but rather, are limiting with regard to functional activities which are within the scope of this ANSI standard.
- A.
1
- B.
2
- C.
3
- D.
4
Correct Answer
C. 3Explanation
The question asks about the number of levels of qualifications identified under ANSI general qualifications. The answer is 3. The requirements for each level are not based on organizational position or professional status, but rather on functional activities within the scope of the ANSI standard.Rate this question:
-
- 4.
What Material Purchasing & Contracts procedure govern the Training, Qualification and Certification of Receipt Inspectors?
- A.
EN-MP-121
- B.
ENN-MP-121
- C.
EN-MP-122
- D.
ENN-MP-122
Correct Answer
A. EN-MP-121Explanation
The correct answer is EN-MP-121. This material purchasing and contracts procedure governs the training, qualification, and certification of receipt inspectors.Rate this question:
-
- 5.
A vision test may be conducted by.
- A.
Medical Doctor
- B.
NDT Level III
- C.
Registered Nurse
- D.
All of the Above
Correct Answer
D. All of the AboveExplanation
A vision test may be conducted by a Medical Doctor, NDT Level III, or a Registered Nurse. This means that all of these professionals are qualified and capable of performing a vision test. Each of these individuals has the necessary knowledge and skills to assess a person's vision and determine any potential issues or abnormalities. Therefore, the correct answer is "All of the Above."Rate this question:
-
- 6.
Vision tests are not to exceed ____ year and is documented on a visual acuity record.
- A.
3 Years
- B.
2 Years
- C.
1 Year
- D.
4 Years
Correct Answer
C. 1 YearExplanation
Vision tests are required to be conducted every year and the results are recorded on a visual acuity record. This ensures that any changes in an individual's vision can be detected and appropriate measures can be taken in a timely manner. Regular vision tests are important for maintaining good eye health and addressing any potential issues early on.Rate this question:
-
- 7.
Measuring and test equipment received in Receipt Inspection shall be calibrated using reference standards traceable to what national standard.
- A.
NSTI
- B.
NIST
- C.
NTSI
- D.
NSIT
Correct Answer
B. NISTExplanation
The measuring and test equipment received in Receipt Inspection should be calibrated using reference standards that are traceable to the national standard, NIST. NIST stands for the National Institute of Standards and Technology, which is a federal agency responsible for developing and promoting measurement standards in the United States. By calibrating the equipment using NIST-traceable standards, it ensures accuracy and reliability in the measurements taken by the equipment.Rate this question:
-
- 8.
When performing CGI inspections at PNPS what is the least used method of inspection.
- A.
Method 7
- B.
Method 3
- C.
Method 1
- D.
Method 4
Correct Answer
D. Method 4Explanation
The question asks for the least used method of inspection during CGI inspections at PNPS. The correct answer is Method 4. This means that among the given methods (Method 7, Method 3, Method 1, and Method 4), Method 4 is the one that is used the least during CGI inspections at PNPS.Rate this question:
-
- 9.
What is the most used method of inspection used during the CGI process?
- A.
Method 1
- B.
Method 2
- C.
Method 3
- D.
Method 4
Correct Answer
A. Method 1Explanation
The most used method of inspection during the CGI process is Method 1.Rate this question:
-
Quiz Review Timeline +
Our quizzes are rigorously reviewed, monitored and continuously updated by our expert board to maintain accuracy, relevance, and timeliness.
-
Current Version
-
Mar 22, 2023Quiz Edited by
ProProfs Editorial Team -
Jun 29, 2009Quiz Created by
Srainey
Back to top