RCDD Chapter 22

1. A star topology shold be implemented for balanced twisted-pair cabling.

True

False

2. Review picture on page 22.20

Yes

No

3. In many areas, residential cabling responsibilities have shifted from the access privider to the end user.

True

False

4. Aps provide access cabling up to the minimum point of presence on the exterior of a residence.

True

False

5. Where is the demarcation point usually located?

Inside the basement

Inside the garage

Outside of and exterior building wall

6. Grade 2=?

Two T568 A outlet/ connectors

Two F Connectors (75 ohm coaxial cable)

Submit

7. Kevin is a loser?

True

False

8. Provide access to the building electrical grond within ____ of the Distribution Device (DD)

1.52 m (5 ft)

2.52 m (6 ft )

3.52 m (7 ft )

9. A dedicated _ ampere (A) _ volt (V) alternation current (AC) nominal , nonswithced duplex electrical outlet must be provided within 1.52 m (5 ft ) of the DD.

20 A, 220 V

15 A, 120V

10. Each living area should be cabled with at least _____ telecommunications outlet/connector?

Two

Three

One

Four

11. Metallic conduit in the ceiling and rigid polyvinyl chloride (PVC) inthe slab are examples of conduit distribution where?

Six -unit towhouse

Seven unit townhouse

5 unit townhouse

12. Recommended Cables for telecommunications outlet/ connector cable are?

4-pair 100 ohm balanced twisted-pair category 5e, although category 6 is recommended.

Multimode optical fiber

Singlemode optical fiber

Series 6 coaxial

Submit

13. Recommended backbone cables include?

100 ohm balanced twisted-pair

Multimode optical fiber

Singlemode optical fiber

Trunk, feeder, and distribution coaxial cable

Series 6 and 11 coaxial cable

Submit

14. Telecommunications outlet/connectors for residences consist of two grades. Grade 1 =?

One T568A outlet /conector

One F outlet/ connector (75 ohm coaxial cable)

Two-strand optical fiber

Submit

15. You must use only rated components and mounting hardware in the cabling system. Modular jack and plug mating connections shall satisfy mechanical tests. This requirements address the mating of :

6- position plugs with 6-position jacks

8 position plugs with 8 jposition jacks

6-position plugs with 8 position jacks

Submit

RCDD Chapter 22

1. A star topology shold be implemented for balanced twisted-pair cabling.

2.

What first name or nickname would you like us to use?

2. Review picture on page 22.20

3. In many areas, residential cabling responsibilities have shifted from the access privider to the end user.

4. Aps provide access cabling up to the minimum point of presence on the exterior of a residence.

5. Where is the demarcation point usually located?

6. Grade 2=?

7. Kevin is a loser?

8. Provide access to the building electrical grond within ____ of the Distribution Device (DD)

9. A dedicated _____ ampere (A) _____ volt (V) alternation current (AC) nominal , nonswithced duplex electrical outlet must be provided within 1.52 m (5 ft ) of the DD.

10. Each living area should be cabled with at least _____ telecommunications outlet/connector?

11. Metallic conduit in the ceiling and rigid polyvinyl chloride (PVC) inthe slab are examples of conduit distribution where?

12. Recommended Cables for telecommunications outlet/ connector cable are?

13. Recommended backbone cables include?

14. Telecommunications outlet/connectors for residences consist of two grades. Grade 1 =?

15. You must use only rated components and mounting hardware in the cabling system. Modular jack and plug mating connections shall satisfy mechanical tests. This requirements address the mating of :

9. A dedicated _ ampere (A) _ volt (V) alternation current (AC) nominal , nonswithced duplex electrical outlet must be provided within 1.52 m (5 ft ) of the DD.