Quiz - Refresher June Week 3
-
Which angle should be used for photography?
-
Best Angle
-
Low Angle
-
High Angle
-
Middle Angle
-
About This Quiz
Quiz - Refresher June week 3 assesses knowledge on photography techniques, focusing on angles, framing, and room depiction. It evaluates understanding of best practices in capturing images, positioning, and the impact of room shape on photography.
Quiz Preview
- 2.
Which error is marked, if square shaped room is covered by using rule of symmetry?
-
Position and Framing
-
Subject not covered
-
Picture Orientation
Correct Answer
A. Position and FramingExplanation
When a square-shaped room is covered using the rule of symmetry, the error that is marked is "Position and Framing." This means that there is an issue with the placement and arrangement of objects or elements within the room. It suggests that the objects are not positioned correctly or framed properly, resulting in an error in the overall symmetry of the room.Rate this question:
-
- 3.
Main Entrance door should be captured without a door frame.
-
True
-
False
Correct Answer
A. FalseExplanation
The main entrance door should be captured with a door frame. This is because the door frame provides structural support and stability to the door, ensuring that it fits securely within the opening. Without a door frame, the door may not function properly and could be easily damaged or misaligned. Additionally, the door frame helps to seal the entrance, preventing drafts, moisture, and pests from entering the building. Therefore, it is important to capture the main entrance door with a door frame.Rate this question:
-
- 4.
If applying corner rule on two blank walls, corner should be in middle of the picture.
-
True
-
False
Correct Answer
A. TrueExplanation
According to the given statement, if the corner rule is applied on two blank walls, the corner should be in the middle of the picture. This means that when two walls meet at a corner, the picture should be centered in that corner. Therefore, the correct answer is true.Rate this question:
-
- 5.
Position of DC is determined as per shape of room.
-
True
-
False
Correct Answer
A. TrueExplanation
The position of a DC (Direct Current) is determined based on the shape of the room. This means that the placement of the DC is dependent on the layout and structure of the room in order to optimize its functionality and effectiveness. Therefore, the statement is true.Rate this question:
-
- 6.
Tilt is of two types : horizontal tilt and vertical Tilt
-
True
-
False
Correct Answer
A. TrueExplanation
The statement is true because tilt can indeed be classified into two types: horizontal tilt and vertical tilt. Horizontal tilt refers to the tilting of an object or surface along the horizontal axis, while vertical tilt refers to the tilting along the vertical axis. Therefore, the statement accurately describes the two types of tilt.Rate this question:
-
- 7.
Horizontal tilt occurs if horizontal beam is not aligned.
-
True
-
False
Correct Answer
A. TrueExplanation
Horizontal tilt refers to the misalignment of a horizontal beam. If the horizontal beam is not properly aligned, it can result in a horizontal tilt. Therefore, the statement that horizontal tilt occurs if the horizontal beam is not aligned is true.Rate this question:
-
- 8.
Vertical tilt occurs if horizontal beam is not aligned.
-
True
-
False
Correct Answer
A. FalseExplanation
Vertical tilt does not occur if the horizontal beam is not aligned. Vertical tilt refers to the rotation or tilting of an object along its vertical axis. It is not dependent on the alignment of a horizontal beam. Therefore, the correct answer is False.Rate this question:
-
- 9.
Camera facing downwards or upwards will lead to tilted pictures.
-
True
-
False
Correct Answer
A. TrueExplanation
When a camera is facing downwards or upwards, it can cause the pictures to appear tilted. This is because the camera's perspective is not aligned with the horizon, resulting in a distorted image. To capture a level and straight photo, it is important to ensure that the camera is positioned parallel to the ground.Rate this question:
-
- 10.
Tilt is an important parameter in housing data collection quality.
-
True
-
False
Correct Answer
A. TrueExplanation
Tilt refers to the angle at which an object or surface is positioned. In the context of housing data collection, tilt can affect the accuracy and reliability of the collected data. If a property is photographed or measured at an incorrect angle, it can distort the perception of the property's features and dimensions. This can lead to inaccurate assessments and evaluations. Therefore, ensuring proper tilt is crucial in maintaining high-quality housing data collection.Rate this question:
-
- 11.
Space not covered error is marked when:
-
DC did not cover the entire space of the property
-
Lat Long is incorrect
-
Photo is Tilt
-
Framing is incorrect
Correct Answer
A. DC did not cover the entire space of the propertyExplanation
The correct answer is that the DC did not cover the entire space of the property. This means that the data collector did not capture all the necessary information about the property, leaving some areas uncovered or missing. This could result in incomplete or inaccurate data for analysis or documentation purposes.Rate this question:
-
- 12.
Main Entrance is an entity of a property.
-
True
-
False
Correct Answer
A. TrueExplanation
The statement suggests that "Main Entrance" is considered as an entity of a property. This implies that the main entrance is a distinct and identifiable part of the property, serving as the primary access point. Therefore, the answer "True" indicates that the statement is correct.Rate this question:
-
- 13.
Balcony is an entity of a property.
-
True
-
False
Correct Answer
A. TrueExplanation
A balcony is a feature or component of a property that is typically attached to a building and provides an outdoor space for relaxation or enjoyment. It is considered as part of the property and is included in its overall structure. Therefore, the statement that "balcony is an entity of a property" is true.Rate this question:
-
- 14.
Forgot entity error would be marked when :
-
DC did not capture all the entities
-
Photo is blur
-
Photo is over exposed
-
Photo is under exposed
Correct Answer
A. DC did not capture all the entitiesExplanation
The correct answer is that the DC (presumably referring to a digital camera) did not capture all the entities. This means that when using the camera, it failed to capture or record all the necessary objects or subjects in the photo. This could be due to various reasons such as poor framing, objects being out of focus, or objects being outside the camera's field of view.Rate this question:
-
- 15.
Capturing of all the entities leads to good customer experience.
-
True
-
False
Correct Answer
A. TrueExplanation
Capturing all the entities refers to gathering and storing information about all the relevant aspects of a customer's interaction or transaction. This includes details about their preferences, history, and needs. By capturing all the entities, businesses can gain a comprehensive understanding of their customers, which allows them to personalize their services and provide a better customer experience. Therefore, it can be inferred that capturing all the entities leads to a good customer experience, making the answer "True" correct.Rate this question:
-
- 16.
In which report will your name reflect, if you fail to upload the properties before 12:00 AM?
-
Image service usage
-
Late flat creation
-
Pending Properties
-
None
Correct Answer
A. Image service usageExplanation
If you fail to upload the properties before 12:00 AM, your name will reflect in the "Image service usage" report. This report is likely to track and record the usage of the image service, including any failures or delays in uploading properties.Rate this question:
-
- 17.
After clicking on upload button the app gives us a flat ID.
-
True
-
False
Correct Answer
A. TrueExplanation
When the user clicks on the upload button in the app, the app generates a flat ID. This suggests that the statement is true.Rate this question:
-
- 18.
Uploading the properties on time will help in reducing the activation TAT of the property.
-
True
-
False
Correct Answer
A. TrueExplanation
Uploading the properties on time means submitting the necessary information and documents within the specified deadline. This helps in reducing the activation TAT (Turnaround Time) of the property, which refers to the time it takes for a property to become active and available for use or sale. By uploading the properties on time, the necessary processes and approvals can be completed promptly, resulting in a shorter activation TAT. Therefore, the statement is true.Rate this question:
-
- 19.
All the flats collected in a day should be uploaded by 9:00 PM on daily basis.
-
True
-
False
Correct Answer
A. TrueExplanation
The statement implies that there is a requirement for all the flats collected in a day to be uploaded by 9:00 PM daily. This suggests that there is a specific deadline for uploading the flats, indicating a sense of urgency and timeliness in the process. Therefore, the correct answer is True, as it aligns with the given requirement.Rate this question:
-
- 20.
HD images can be uploaded by 3g network.
-
True
-
False
Correct Answer
A. FalseExplanation
HD images typically have a larger file size compared to regular images. Uploading HD images requires a higher internet speed and bandwidth to transfer the larger file. 3G networks generally have slower speeds compared to newer technologies like 4G or 5G, which may result in slower upload times or even failure to upload HD images. Therefore, it is unlikely that HD images can be uploaded efficiently using a 3G network.Rate this question:
-
Quiz Review Timeline (Updated): Mar 19, 2023 +
Our quizzes are rigorously reviewed, monitored and continuously updated by our expert board to maintain accuracy, relevance, and timeliness.
-
Current Version
-
Mar 19, 2023Quiz Edited by
ProProfs Editorial Team -
Jun 20, 2016Quiz Created by
Cheenu_arora
Back to top