PGDCA Course: Computer Trivia Questions Quiz! Knowledge Test
Below is a PGDCA Course, Computer Trivia Questions Quiz! Do you have a huge interest in computer applications and are taking a postgraduate diploma course on them? The quiz below tests you on everything that a person preparing for their finals needs to have an idea on. How about you give it a shot and get to see if you will get them all right?
Questions and Answers
- 1.
Which of the following is the most fault-tolerant WAN topology?
- A.
Partial-mesh
- B.
Full-mesh
- C.
Ring
- D.
Bus
Correct Answer
B. Full-meshExplanation
A full-mesh WAN topology is considered the most fault-tolerant because it provides multiple connections between each network node. This redundancy ensures that if one connection fails, there are alternate paths available for data transmission. This makes the network more resilient to failures and ensures high availability. In contrast, partial-mesh, ring, and bus topologies have fewer connections or a single path, making them less fault-tolerant.Rate this question:
-
- 2.
Which type of cable are you most likely to find on networks that use bus topology?
- A.
UTP cable
- B.
STP cable
- C.
Coaxial cable
- D.
Fiber-optic cable
Correct Answer
C. Coaxial cableExplanation
In a bus topology network, all devices are connected to a single cable called the bus. Coaxial cable is most commonly used in bus topology networks due to its ability to transmit data over long distances without significant loss or interference. It is a thick, durable cable with a copper core surrounded by insulation, a metallic shield, and an outer jacket. The metallic shield helps to prevent signal interference and ensures reliable data transmission. Therefore, coaxial cable is the most suitable type of cable for networks that use bus topology.Rate this question:
-
- 3.
________ programs are automatically loaded and operates as a part of browser.
- A.
Widgets
- B.
Utilities
- C.
Plug-ins
- D.
Add-ons
Correct Answer
C. Plug-insExplanation
Plug-ins are additional software programs that are automatically loaded and operate as a part of a browser. They enhance the functionality of the browser by adding new features or extending existing ones. Plug-ins are designed to seamlessly integrate with the browser and provide additional capabilities such as playing multimedia content, displaying interactive elements, or enhancing security. They are commonly used to enable specific types of content or functionality that may not be natively supported by the browser.Rate this question:
-
- 4.
Which item is an example of a physical network address?
- A.
IP address
- B.
MAC address
- C.
Workstation name
- D.
Www.proprofs.com
Correct Answer
B. MAC addressExplanation
A MAC address, also known as a Media Access Control address, is a unique identifier assigned to a network interface controller (NIC) for communication on a physical network. It is a hardware address that is embedded in the network adapter at the time of manufacturing. Unlike an IP address, which is assigned by a network administrator and can change, a MAC address is permanent and cannot be altered. Therefore, a MAC address is a clear example of a physical network address.Rate this question:
-
- 5.
What is a LAN?
- A.
Long Area Network
- B.
Ludacris Area Network
- C.
Local Area Network
- D.
Live Area Network
Correct Answer
C. Local Area NetworkExplanation
A LAN stands for Local Area Network, which is a network that connects computers and devices within a limited area such as a home, office, or building. It allows for the sharing of resources such as files, printers, and internet connections among connected devices. LANs are typically faster and more secure than wide area networks (WANs) as they cover a smaller geographic area.Rate this question:
-
- 6.
A computer that requests the resources or data from other computer is called as ________ computer.
- A.
Server
- B.
Client
- C.
Both of the above
- D.
None of the above
Correct Answer
B. ClientExplanation
A computer that requests resources or data from another computer is called a client. This is because a client computer relies on a server computer to provide it with the necessary resources or data. The server computer is responsible for fulfilling these requests and delivering the requested information to the client. Therefore, the correct answer is "Client."Rate this question:
-
- 7.
Which topology used in Ethernet?
- A.
Bus
- B.
Ring
- C.
Tree
- D.
Mesh
Correct Answer
A. BusExplanation
Ethernet typically uses a bus topology. In a bus topology, all devices are connected to a single cable called the bus. Data is transmitted on the bus and received by all devices on the network. This allows for easy installation and scalability as devices can be added or removed without disrupting the network. However, a drawback of the bus topology is that if the bus cable fails, the entire network can be affected.Rate this question:
-
- 8.
A port address in TCP/IP is ………bits long.
- A.
32
- B.
48
- C.
16
- D.
64
Correct Answer
C. 16Explanation
A port address in TCP/IP is 16 bits long. In TCP/IP, a port address is used to identify specific applications or services running on a device. It is a number between 0 and 65535. The 16-bit length allows for a total of 65,536 possible port addresses, which is sufficient to accommodate a wide range of applications and services on the internet.Rate this question:
-
- 9.
HTML stands for?
- A.
Hyper Text Markup Language
- B.
High Text Markup Language
- C.
Hyper Tabular Markup Language
- D.
None of these
Correct Answer
A. Hyper Text Markup LanguageExplanation
HTML stands for Hyper Text Markup Language. It is the standard markup language used for creating web pages and web applications. HTML uses tags to structure the content and define the layout of a webpage. These tags are interpreted by web browsers to display the content in a formatted manner. Therefore, the correct answer is "Hyper Text Markup Language".Rate this question:
-
- 10.
The attribute of tag
- A.
Method
- B.
Action
- C.
Both (a)&(b)
- D.
None of these
Correct Answer
C. Both (a)&(b)Explanation
The correct answer is Both (a) and (b). This means that the attribute "method" can be used in both the "form" and "button" tags. The "method" attribute specifies the HTTP method to be used when submitting the form data. In the "form" tag, it defines the method for submitting the form, while in the "button" tag, it determines the type of HTTP request to be sent when the button is clicked.Rate this question:
-
- 11.
The correct HTML tag for the largest heading is
- A.
<head>
- B.
<h6>
- C.
<heading>
- D.
<h1>
Correct Answer
D. <h1>Explanation
The correct HTML tag for the largest heading is . This tag is used to define the most important heading on a webpage. It represents the highest level of heading and is typically used for the main title or heading of the page.Rate this question:
-
- 12.
Web pages start with which of the following tag?
- A.
<Body>
- B.
<Title>
- C.
<HTML>
- D.
<Form>
Correct Answer
C. <HTML>Explanation
The correct answer is "". Web pages start with the "" tag because it is the root element of an HTML document and defines the entire document. It is followed by the "" and "" tags, which contain the metadata and content of the web page respectively.Rate this question:
-
- 13.
Markup tags tell the web browser.
- A.
How to organise the page
- B.
How to display the page
- C.
How to display message box on page
- D.
None of these
Correct Answer
B. How to display the pageExplanation
Markup tags tell the web browser how to display the page. These tags provide instructions to the browser on how to structure and format the content of the webpage. By using markup tags such as HTML, CSS, and JavaScript, web developers can define the layout, style, and functionality of the webpage, allowing the browser to render and display the page correctly to the user.Rate this question:
-
- 14.
Www is based on which model?
- A.
Local-server
- B.
Client-server
- C.
3-tier
- D.
None of these
Correct Answer
B. Client-serverExplanation
The correct answer is client-server because the World Wide Web (www) is a network of servers that host websites and clients that access and view those websites. The client-server model is a distributed application structure where clients request resources or services from servers, and the servers provide those resources or services in response to the client's requests. In the case of the www, clients (web browsers) send requests to web servers to retrieve web pages and other resources. Therefore, the www is based on the client-server model.Rate this question:
-
- 15.
Correct HTML to left-align the content inside a table cell is
- A.
<tdleft>
- B.
<td raligh = "left" >
- C.
<td align = "left">
- D.
<td leftalign>
Correct Answer
C. <td align = "left">Explanation
The correct HTML to left-align the content inside a table cell is . This attribute aligns the content within the table cell to the left side.Rate this question:
-
- 16.
In networking terminology UTP means
- A.
Unshielded Twisted pair
- B.
Ubiquitious Teflon port
- C.
Uniformly Terminating port
- D.
Unshielded T-connector port
Correct Answer
A. Unshielded Twisted pairExplanation
UTP stands for Unshielded Twisted Pair. This is a type of cable used in networking that consists of pairs of wires twisted together. The term "unshielded" means that the cable does not have any additional protective shielding around the wires. The twisting of the pairs helps to reduce electromagnetic interference and crosstalk between the wires, improving the overall performance of the cable. UTP cables are commonly used for Ethernet connections in both residential and commercial environments.Rate this question:
-
- 17.
Working of the WAN generally involves
- A.
Telephone lines
- B.
Micro waves
- C.
Satellites
- D.
All of these
Correct Answer
D. All of theseExplanation
The correct answer is "All of these" because the working of a Wide Area Network (WAN) typically involves the use of various communication technologies, including telephone lines, micro waves, and satellites. WANs are designed to connect geographically dispersed locations, and different technologies are used depending on the specific requirements and availability of infrastructure. Telephone lines are commonly used for wired connections, micro waves are used for wireless connections over short distances, and satellites are used for long-distance communication where terrestrial infrastructure is not available. Therefore, all of these options are correct in describing the working of a WAN.Rate this question:
-
- 18.
What uses a physical star topology?
- A.
10 base 5
- B.
10 base 2
- C.
10 base T
- D.
None of these
Correct Answer
C. 10 base TExplanation
10 base T uses a physical star topology. In 10 base T, each device is connected to a central hub or switch using individual twisted pair cables. This creates a star-shaped network where all devices are connected to a central point. This topology allows for easy scalability and troubleshooting as each device can be individually connected or disconnected without affecting the rest of the network.Rate this question:
-
- 19.
The software which allows a user to view the webpage is called __________.
- A.
Operating System
- B.
Website
- C.
Interpreter
- D.
Internet Browser
Correct Answer
D. Internet BrowserExplanation
An internet browser is a software that enables users to view webpages. It is specifically designed to access and display information on the internet. It allows users to navigate through different websites, search for specific content, and interact with web-based applications. An internet browser acts as an interface between the user and the internet, making it possible to access and interact with various online resources.Rate this question:
-
- 20.
The process of keeping addresses in memory for future use is called
- A.
Routing
- B.
Resolving
- C.
Caching
- D.
None of the above
Correct Answer
C. CachingExplanation
Caching is the process of storing data or addresses in memory for future use. It involves temporarily saving frequently accessed data or addresses in a cache, which allows for faster retrieval and processing times. This helps to improve overall system performance and reduce the need for repeated data retrieval from the original source. Therefore, caching is the correct answer for the given question.Rate this question:
-
- 21.
The server on the Internet is also known as a
- A.
Hub
- B.
Host
- C.
Gateway
- D.
Repeater
Correct Answer
B. HostExplanation
A server on the Internet is commonly referred to as a "host". A host is a computer or device that is connected to a network and provides services or resources to other devices or users on the network. It can store and serve web pages, handle email communication, manage databases, and perform various other functions. Therefore, the term "host" accurately describes a server's role in facilitating communication and providing services over the Internet.Rate this question:
-
- 22.
A user can get files from another computer on the Internet by using
- A.
HTTP
- B.
TELNET
- C.
UTP
- D.
FTP
Correct Answer
D. FTPExplanation
FTP (File Transfer Protocol) is the correct answer because it is specifically designed for transferring files between computers on the Internet. FTP allows users to connect to a remote computer, browse its file system, and transfer files back and forth. HTTP (Hypertext Transfer Protocol) is primarily used for accessing and retrieving web pages, TELNET is used for remote login to another computer, and UTP (Unshielded Twisted Pair) is a type of network cable. Therefore, FTP is the most appropriate option for getting files from another computer on the Internet.Rate this question:
-
- 23.
The communication protocol used by Internet is:
- A.
HTTP
- B.
WWW
- C.
TCP/IP
- D.
FTP
Correct Answer
C. TCP/IPExplanation
TCP/IP is the correct answer because it is the communication protocol used by the Internet. TCP (Transmission Control Protocol) is responsible for establishing reliable connections between devices, while IP (Internet Protocol) handles the addressing and routing of data packets across the network. Together, TCP/IP ensures that data can be transmitted and received accurately and efficiently over the Internet. HTTP, WWW, and FTP are all protocols that operate on top of TCP/IP, serving specific purposes such as web browsing and file transfer.Rate this question:
-
- 24.
The first network that planted the seeds of the Internet was:
- A.
ARPANET
- B.
NSFNet
- C.
Vnet
- D.
All of the above
Correct Answer
A. ARPANETExplanation
ARPANET is the correct answer because it was the first network to lay the foundation for the Internet. Developed by the Advanced Research Projects Agency (ARPA) of the United States Department of Defense, ARPANET was established in the late 1960s and connected computers at various research institutions. It pioneered the use of packet switching technology and TCP/IP protocols, which are fundamental to the functioning of the modern Internet. NSFNet and Vnet were subsequent networks that played significant roles in the development of the Internet, but ARPANET was the initial network that started it all.Rate this question:
-
- 25.
Which of the following protocols is used for WWW?
- A.
FTP
- B.
HTTP
- C.
W3
- D.
All of the above
Correct Answer
B. HTTPExplanation
HTTP (Hypertext Transfer Protocol) is the correct answer because it is the protocol used for transmitting web pages and other web content over the internet. FTP (File Transfer Protocol) is a different protocol used for transferring files between computers, while W3 is not a protocol but rather refers to the World Wide Web Consortium (W3C), which develops web standards. Therefore, the correct protocol for the World Wide Web is HTTP.Rate this question:
-
- 26.
TCP is a commonly used protocol at
- A.
Application layer
- B.
Transport layer
- C.
Network layer
- D.
Data Link layer
Correct Answer
B. Transport layerExplanation
TCP (Transmission Control Protocol) is indeed a commonly used protocol at the Transport layer of the TCP/IP network model. The Transport layer is responsible for the reliable delivery of data between two endpoints in a network. TCP provides reliable, connection-oriented communication by establishing a connection between the sender and receiver, segmenting the data into smaller packets, ensuring their reliable delivery, and reassembling them at the receiving end. Therefore, TCP being a transport layer protocol is the correct answer.Rate this question:
-
- 27.
The first page that you normally view at a Website is its:
- A.
Home Page
- B.
Master Page
- C.
First Page
- D.
None of the above
Correct Answer
A. Home PageExplanation
The first page that you normally view at a website is its home page. The home page is the main page of a website that serves as an entry point for users. It typically contains an overview of the website's content, navigation menus, and links to other pages. The home page is designed to provide users with a clear understanding of what the website offers and helps them navigate to specific sections or pages of interest.Rate this question:
-
- 28.
Voice mail, E-mail, Online service, the Internet and the WWW are all example of
- A.
Computer categories
- B.
Connectivity
- C.
Telecomputing
- D.
None of the above
Correct Answer
C. TelecomputingExplanation
Telecomputing refers to the use of computers and telecommunications technology to facilitate communication and information exchange. Voice mail, E-mail, Online service, the Internet, and the WWW all fall under this category as they utilize computers and telecommunications networks to enable communication and access to information. Therefore, the correct answer is Telecomputing.Rate this question:
-
- 29.
A small network making up the Internet and also having a small numbers of computers within it is called
- A.
Host
- B.
Address
- C.
Subdomain
- D.
None of the above
Correct Answer
C. SubdomainExplanation
A subdomain is a subset of a larger domain within the Domain Name System (DNS). It is used to organize and categorize websites or resources within a larger domain. In the context of the given question, a small network with a limited number of computers can be considered as a subdomain within the larger Internet domain. Therefore, the correct answer is "Subdomain".Rate this question:
-
- 30.
SMTP is a simple
- A.
TCP protocol
- B.
TCP/ IP protocol
- C.
IP protocol
- D.
None of the above
Correct Answer
A. TCP protocolExplanation
SMTP (Simple Mail Transfer Protocol) is a protocol used for sending email messages between servers. It is built on top of the TCP (Transmission Control Protocol) protocol, which provides reliable and ordered delivery of data packets over a network. TCP/IP (Transmission Control Protocol/Internet Protocol) is a suite of protocols that allows communication between devices on the internet. SMTP operates within the TCP/IP protocol suite, making the correct answer TCP protocol.Rate this question:
-
- 31.
A simple protocol used for fetching e-mail from a mailbox is
- A.
POP2
- B.
POP3
- C.
IMAP
- D.
None of the above
Correct Answer
B. POP3Explanation
POP3 (Post Office Protocol version 3) is a simple protocol used for fetching e-mail from a mailbox. It allows users to access their email messages from a remote server and download them to their local devices. POP3 is widely supported by email clients and servers, making it a popular choice for retrieving emails. Unlike its predecessor POP2, which has limited functionality, POP3 offers more advanced features such as the ability to delete messages from the server after downloading. IMAP (Internet Message Access Protocol) is another protocol used for accessing email, but it is not the correct answer in this case. Therefore, the correct answer is POP3.Rate this question:
-
- 32.
Which protocol assigns IP address to the client connected in the internet?
- A.
DHCP
- B.
IP
- C.
RPC
- D.
None of the above
Correct Answer
A. DHCPExplanation
DHCP (Dynamic Host Configuration Protocol) is the correct answer because it is specifically designed to assign IP addresses to clients connected to the internet. DHCP allows for automatic and dynamic allocation of IP addresses, making it easier to manage and administer a network. With DHCP, clients can obtain an IP address, subnet mask, default gateway, and other network configuration information from a DHCP server, simplifying the process of connecting devices to the internet. IP, on the other hand, is the protocol responsible for routing packets across networks, while RPC (Remote Procedure Call) is a protocol used for communication between different processes on a network.Rate this question:
-
- 33.
Which one of the following is not used in media access control?
- A.
Ethernet
- B.
Digital subscriber line
- C.
Fiber distributed data interface
- D.
None of the mentioned
Correct Answer
D. None of the mentionedExplanation
The question asks for the option that is not used in media access control. Media access control (MAC) refers to the protocols and mechanisms used to control access to the transmission media in a network. Ethernet, digital subscriber line (DSL), and fiber distributed data interface (FDDI) are all examples of technologies that use MAC protocols. Therefore, the correct answer is "none of the mentioned" as all the options listed are used in media access control.Rate this question:
-
- 34.
JPEG is a lossless compression technique.
- A.
True
- B.
False
Correct Answer
A. TrueExplanation
JPEG is actually a lossy compression technique, not a lossless one. This means that when an image is compressed using JPEG, some of the original data is permanently discarded in order to reduce file size. This loss of data can result in a decrease in image quality, particularly in areas with fine details or subtle color variations. Therefore, the correct answer should be False, not True.Rate this question:
-
- 35.
The two main file formats for images on the Web GIF and TIF
- A.
True
- B.
False
Correct Answer
B. FalseExplanation
The statement is false because the two main file formats for images on the web are actually JPEG (Joint Photographic Experts Group) and PNG (Portable Network Graphics). While GIF (Graphics Interchange Format) and TIF (Tagged Image File Format) are commonly used for images, they are not the primary formats for web images. JPEG is widely used for photographs and complex images, while PNG is preferred for images with transparent backgrounds or sharp edges.Rate this question:
-
- 36.
Software that may be used to help you locate web pages on topics that you do not know the address for is called search engines.
- A.
True
- B.
False
Correct Answer
A. TrueExplanation
Search engines are software tools that help users locate web pages on topics they do not know the address for. These search engines use algorithms to search through vast amounts of data and provide users with relevant results based on their search queries. By entering keywords or phrases, users can find web pages and information related to their interests or needs. Therefore, the given statement is true.Rate this question:
-
- 37.
SMTP is associated with E-Mail.
- A.
True
- B.
False
Correct Answer
A. TrueExplanation
SMTP (Simple Mail Transfer Protocol) is a communication protocol used for sending and receiving email messages between servers. It is responsible for the transmission of emails from the sender's email client to the recipient's email server. Therefore, SMTP is indeed associated with email, making the given answer "True" correct.Rate this question:
-
- 38.
E-mail is limited to text-based messages.
- A.
True
- B.
False
Correct Answer
B. FalseExplanation
E-mail is not limited to text-based messages. It can also include attachments such as images, documents, and videos. This allows users to send a wide range of content through email, making it a versatile communication tool.Rate this question:
-
- 39.
The two parts of the e-mail address are separated by the @ symbol.
- A.
True
- B.
False
Correct Answer
A. TrueExplanation
The @ symbol is used to separate the two parts of an email address. The part before the @ symbol is the username or the local-part, which identifies the specific user of the email address. The part after the @ symbol is the domain name, which specifies the mail server that handles the email for that address. Therefore, the statement is true.Rate this question:
-
- 40.
CSMA/CD access method is used in Bus Topology.
- A.
True
- B.
False
Correct Answer
A. TrueExplanation
CSMA/CD (Carrier Sense Multiple Access with Collision Detection) is an access method used in Ethernet networks, where multiple devices share the same physical medium, such as a bus topology. In CSMA/CD, devices listen to the network before transmitting data and if they detect a collision, they stop transmitting and wait for a random amount of time before retrying. This method helps to avoid data collisions and ensure efficient sharing of the network medium. Therefore, the statement that CSMA/CD access method is used in Bus Topology is true.Rate this question:
-
- 41.
Copyright law grants the exclusive right to copyright holders in relation to their work.
- A.
True
- B.
False
Correct Answer
A. TrueExplanation
Copyright law does indeed grant exclusive rights to copyright holders in relation to their work. These exclusive rights include the right to reproduce, distribute, display, perform, and create derivative works based on the original work. This means that only the copyright holder has the legal authority to exercise these rights and others must seek permission or a license to use the copyrighted work. Therefore, the statement "True" is the correct answer.Rate this question:
-
- 42.
Java and Javascript both are same thing.
- A.
True
- B.
False
Correct Answer
B. FalseExplanation
Java and Javascript are not the same thing. Although they share similar names, they are completely different programming languages with different syntax, use cases, and purposes. Java is a general-purpose programming language that is widely used for developing applications, while Javascript is a scripting language primarily used for web development. While they may have some similarities in terms of syntax, they are distinct and separate languages.Rate this question:
-
- 43.
JavaScript is a client-side program.
- A.
True
- B.
False
Correct Answer
A. TrueExplanation
JavaScript is indeed a client-side programming language. It is primarily executed on the client's web browser, allowing for dynamic and interactive elements on webpages. This means that JavaScript code is downloaded from the server and executed on the client-side, rather than on the server itself. This allows for enhanced user experience and interactivity on websites.Rate this question:
-
- 44.
<Caption> tag is used to define the column heading.
- A.
True
- B.
False
Correct Answer
B. FalseExplanation
The given statement is false. The tag is not used to define the column heading. Instead, it is used to define a caption or title for a table. The column headings in a table are typically defined using the (table header) tags within the (table row) tags.Rate this question:
-
- 45.
JPG images support only 256 colors.
- A.
True
- B.
False
Correct Answer
B. FalseExplanation
JPG images do not support only 256 colors. In fact, JPG is a lossy compression format that can support millions of colors. It achieves compression by reducing the quality of the image, but it does not limit the number of colors that can be displayed. Therefore, the statement is false.Rate this question:
-
- 46.
Addresses contained in CC are visible to all the recipients of mail.
- A.
True
- B.
False
Correct Answer
A. TrueExplanation
When an email is sent with recipients included in the CC (Carbon Copy) field, all the recipients can see the email addresses of everyone else who received the email. This means that the addresses in the CC field are visible to all the recipients. Therefore, the statement "Addresses contained in CC are visible to all the recipients of mail" is true.Rate this question:
-
- 47.
IRC is a service that runs on the Internet.
- A.
True
- B.
False
Correct Answer
A. TrueExplanation
IRC stands for Internet Relay Chat, which is a service that allows users to communicate with each other in real-time through text-based messages. It operates on the Internet, providing a platform for individuals to join chat rooms or engage in private conversations. Therefore, the given statement that IRC is a service that runs on the Internet is correct.Rate this question:
-
- 48.
A router uses a table to decide the best path for data transmission.
- A.
True
- B.
False
Correct Answer
B. FalseExplanation
A router does use a table, known as a routing table, to decide the best path for data transmission. However, the statement in the question is incorrect as it states that a router uses the table to decide the best path for data transmission. In reality, a router uses the routing table to determine the next hop for data packets based on their destination IP addresses. The routing table contains information about various network destinations and the associated next hops. So, the correct answer is False.Rate this question:
-
- 49.
Collaborative computing facilitates the working of people together via computer assisted means
- A.
True
- B.
False
Correct Answer
A. TrueExplanation
Collaborative computing refers to the use of computer technology to enable people to work together on a task or project. It provides tools and platforms that allow individuals to collaborate, share information, and work collectively towards a common goal. By leveraging computer-assisted means, such as shared documents, real-time communication, and virtual meetings, collaborative computing enhances productivity and enables seamless collaboration regardless of physical location. Therefore, the statement is true as it accurately describes the purpose and benefits of collaborative computing.Rate this question:
-
- 50.
ARPANET was a project of DOD
- A.
True
- B.
False
Correct Answer
A. TrueExplanation
ARPANET was indeed a project of the Department of Defense (DoD). It was the first-ever packet-switching network and was developed by the Advanced Research Projects Agency (ARPA) under the DoD. The purpose of ARPANET was to create a decentralized network that could withstand a nuclear attack and maintain communication between military installations. It laid the foundation for the modern internet and played a crucial role in the development of networking technologies.Rate this question:
-
Quiz Review Timeline +
Our quizzes are rigorously reviewed, monitored and continuously updated by our expert board to maintain accuracy, relevance, and timeliness.
-
Current Version
-
Mar 22, 2023Quiz Edited by
ProProfs Editorial Team -
Feb 14, 2019Quiz Created by
Ommkrishna918
Test of BS V Evening Course: MATH305, Numerical Analysis 1, Chapter 1
Test of BS V Evening Course: MATH305, Numerical Analysis 1, Chapter 1
Instrument Assisted Soft Tissue Mobilization (IASTM) "Introduction Certification Course"
Instrument Assisted Soft Tissue Mobilization (IASTM) "Introduction Certification Course"
A short course on Good Earning - Lawful Livelihood
A short course on Good Earning - Lawful Livelihood
- Aptitude Test Quizzes
- Course Test Quizzes
- Driving Test Quizzes
- English Test Quizzes
- FCAT Quizzes
- General Knowledge Quizzes
- Intelligence Test Quizzes
- Medical Test Quizzes
- Mock Test Quizzes
- Philosophy Test Quizzes
- Practice Test Quizzes
- Pretest Quizzes
- Safety Test Quizzes
- Skill Assessment Quizzes
- Spelling Test Quizzes
- Standardized Test Quizzes
Back to top